If your leaves aren’t mushy or falling over but still don’t appear right, you might have an insect infestation.
It can be difficult to identify little pests like thrips or mites. They are frequently only discovered when evidence of harm appear. These insects sit on the plant’s leaves and in the soil, sucking the juices from within. The leaves will become deformed or misshapen as a result of this damage, especially if it is left untreated for a long time.
Disease can also create deformed leaves, though it is less prevalent inside. Various fungal diseases can settle on your plants in hot and humid weather, causing sections to rot and die off, resulting in deformation.
Always keep an eye out for indicators of pest or disease concerns when watering your plants. Natural homemade insect sprays or horticultural oil, which can be bought at your local nursery or online, can be used to get rid of pests.
Unfortunately, fungal diseases are more difficult to treat. If the condition isn’t too bad, you can prune the damaged areas of the plants or spray the leaves with an organic fungicide. If the disease is unmanageable, you may need to remove the plant from your home before it spreads to your other plants.
How do you know when your snake plant is dying?
Snake plants thrive in hot, sunny conditions, although they prefer to be in the shade, frequently under tree canopies.
In some situations, snake plants can adapt to full sun, although they prefer brilliant indirect light and can even thrive in deep shade.
(Shade can help snake plants develop more slowly.) (For more information on why a snake plant isn’t growing and how to fix it, see my article.)
If the snake plant is relocated from a shady location to bright sunshine, it will burn and develop brown spots on the leaves.
The sunburned areas of the leaf do not recover in appearance, but they do not harm the snake plant, which can live for a long period even if its leaves are sunburned.
However, cutting the damaged leaf blade back to the earth to encourage additional healthy leaf growth is a good idea.
Because the snake plant can become quite top heavy, larger pots with a larger base prevent it from tumbling over. If a snake plant topples over, it might cause bruising.
Key Takeaways:
- Overwatering and moist soils cause the leaves to become yellow or brown and droop, resulting in a dying snake plant. Cold stress can be caused by temperatures below 50°F, resulting in a dying snake plant.
- If the leaves curl, it could be a sign of cold stress if they’ve been exposed to freezing temperatures, or it could be a sign of drought stress because the leaves store water.
- Sunburn is often indicated by brown dots on the leaves. Snake plants prefer bright indirect light, while direct sunlight can cause brown patches.
- To resurrect a dying snake plant, emulate the conditions of its native habitat by watering it seldom, using indirect light, and keeping it warm to avoid cold stress. Take leaf cuttings from healthy tissue to propagate the snake plant if it is dying.
How do you fix a sick snake plant?
Root rot, which is caused by overwatering, is the most common problem with Snake Plants, especially during the winter months. The roots then die back due to a lack of oxygen or a soil fungus overgrowth. Soggy soils promote the growth and reproduction of Pythium, Phytophthora, Rhizoctonia, and Fusarium fungi, which attack plants by spreading into the roots. As healthy roots die, they turn dark and mushy, unable to absorb the nutrients required for growth.
Root rot is difficult to detect since it develops beneath the soil surface and out of sight. Root rot can kill an entire plant in 10 days if the conditions are ideal, such as in pots without drainage holes.
While snake plants will struggle to live in pots without drainage holes, there are a few creative solutions to this problem that you might not consider. To learn how to grow plants in pots without holes, read my post.
Although it is necessary to pot your snake plant in a well-draining pot, you also want your plant to look good and add to the attractiveness of your home. You may have some ornamental pots with adequate drainage in which to plant your snake plant, but I prefer to place it on a drip tray or within a more elegant planter. Here are some of my favorite indoor planter designs.
Symptoms
The rot is first visible on the roots, causing them to turn dark and mushy, which are classic indicators of rot. Root rot causes leaves to turn yellow, wilt, or droop, and eventually become mushy. Once symptoms appear in the leaves, the condition may be beyond repair, putting the entire plant in jeopardy.
Treatment
If you catch the problem early enough, you can repot the plant. Remove as much diseased soil as possible before replacing it with new, clean potting soil. To assist avoid reinfection, apply a root treatment with helpful mycorrhizal species or sprinkle the healthy roots with sulfur powder. Sulfur acidifies the soil, making some nutrients less available and limiting the food source for pathogens that cause root rot. Beneficial mycorrhizae create a hostile environment for unwanted bacteria and fungi; sulfur acidifies the soil, making some nutrients less available and limiting the food source for pathogens that cause root rot.
If the root rot has progressed far enough, dissect the plant and keep just the healthy parts. Take cuttings from healthy foliage and root them to propagate a new plant if the entire base is compromised.
Prevention
When the top 2-4″ of the soil has completely dried up, water the plants. During the cooler, winter months, when the plant is dormant, this could mean just watering it every 1-2 months.
Snake plants are perfect for the less-than-careful gardener. For weeks at a time, you can go without watering them. Your snake plant will easily endure 3 weeks or more without water, even in hot, arid conditions, so you won’t have to bother about all the methods to water houseplants while on vacation.
What am I doing wrong with my snake plant?
Mealybug and spider mite infestations are common on snake plants. These pests feed on the plant’s sap, weakening it and producing tiny lesions and leaf loss. Plants that are heavily infested should be discarded since pest control will take a long time and you risk infecting other plants. Mealybugs can be controlled by handpicking them or dabbing them with alcohol. Washing spider mites off the plant and boosting the humidity surrounding it are the best ways to get rid of them. Insecticidal and biological treatment are other options for both pests.
Improper watering
The succulent plant mother-in-tongue law’s has thick, moisture-retaining leaves. The plant can live in its natural environment, which is arid, rocky regions of the West African tropics, thanks to the built-in watering system. The snake plant, like many succulents, is prone to root rot in wet conditions, and droopy snake plant leaves are common when the plant is overwatered.
When the top 2 or 3 inches (5-7.5 cm) of soil is entirely dry, water the snake plant deeply until water runs through the drainage hole. Regardless of the circumstances, a plant near a heat vent or a sunny window will require more frequent watering. Many people, however, find that watering every two or three weeks is plenty.
Allow the pot to drain freely before reinstalling it on the drainage saucer by watering around the inside border of the pot to keep the leaves dry. Wait until the top of the soil is completely dry before watering again. Water carefully during the winter months, only when the leaves appear to be wilting. It’s typically adequate to do it once a month.
What does an overwatered snake plant look like?
Drooping, yellowing leaves, and easy falling over are all indicators of an overwatered snake plant. To keep the snake plant from dying, remove it from its pot, chop off any rotting roots, and repot it with fresh potting mix. Place the plant in a bright, indirect light source.
Why does my snake plant have brown tips?
Snake plants (Sansevieria trifasciata) are known for their hardiness. That’s presumably why they’re so common in many households. Even the toughest plants have their limits, and brown tips on snake plant leaves are one symptom of a problem.
Why do the leaves of your snake plant have brown tips? The most common cause of brown tips on a snake plant is;
These “indestructible” plants are advertised to be low-maintenance, but they won’t grow or look their best unless you provide them the correct circumstances. Continue reading to learn how to mend a snake plant with brown tips and how to avoid it in the future.
How often should you water snake plants?
Always check your plant’s watering requirements as soon as you get it. Check the moisture level in the soil first to make sure it isn’t soggy in the root zone before giving your plant a drink. Consider aerating your plant’s soil before watering it for the first time. Aerating the soil allows it to breathe and release moisture.
A soil probe, which allows you to monitor your plant’s moisture level at the root level and can also be used to aerate the soil if overwatered, is the best tool we’ve discovered to get an accurate moisture reading throughout the soil. Soil probes have proven to be an invaluable aid in keeping snake plants alive and well. The Monitor Brass Soil Probe is a stylish choice.
Between waterings, Sansevieria prefers to dry fully. Overwatering is the most typical mistake made with these plants. You won’t need to water your plant more than once every 10 days (at most) during the growing season, even if it’s in plenty of bright indirect light. Watering might be as seldom as once a month during the cold months or if the plant is in low light. Regardless of where you put it, make sure the soil on your Sansevieria is completely dry between waterings. Because Sansevieria is prone to root rot, it’s critical not to water the plant if the soil in the root zone at the plant’s base is damp.
Rotate your plant on a regular basis to guarantee even development on all sides, and dust the leaves frequently to ensure optimal photosynthetic activity. Take advantage of the opportunity to dust the leaves and inspect the undersides for bugs while you’re at it. Once every couple of months, clean your leaves with a microfiber cloth and a fine-spray mister.
Note that if you’re potting your snake plant in an organic container, you need use a waterproof saucer underneath to protect your floors and table tops, as humidity can build up beneath the pot and damage surfaces.
Remember that each plant is a unique living organism with distinct needs, especially in its own environment. Pay attention to your Sansevieria’s health and watering requirements, and you’ll enjoy a long and happy relationship.
How do you save droopy snake plant?
When a plant’s leaves droop, it’s time to repot or transfer it; this happens when the plant gets too much water. Remove it from its pot or dig it up, rinse off the old soil, and replant it in fresh potting soil or an outdoor spot with greater drainage.
How do you know when your snake plant needs water?
You’ve chosen a low-maintenance indoor plant. The upkeep of a snake plant is simple. When the soil dries out, water the plant to keep it looking its best. Touching the soil once a week is the best way to detect whether your plant needs watering. It’s time to water when the top inch of soil feels dry.
- Fill a watering can halfway with room temperature water and water your plant. Allow an hour or so for the plant to soak up the water that drains into the saucer. Any water that has been left out for an extended period of time should be discarded. Alternatively, you can submerge the plant in a sink or bathtub and hydrate it with chilly tap water. Allow the plant to completely drain before returning it to its original spot.
- Snake plant care does not necessitate a lot of fertilizer. You can feed the plant with a houseplant fertilizer once or twice a year, following the package guidelines.
Can a plant recover from overwatering?
- Even if it’s a full-sun plant, move it to a shady spot. Remove any leaves that are dead or withering. These must be easily distinguishable.
- Check for good drainage in your container and, if necessary, provide more air space around the roots. As a result, oxygen will be able to reach the root zone. Remove any roots that are dead or dying, and preserve only the healthy ones.
- Only water when the soil seems dry to the touch, but not too dry. At this point, you should stop fertilizing the plant until it is healthy again.
Your plant’s ability to recover from overwatering is never guaranteed. Within a week or so, you should notice results if your plant survives. You can now return your plant to its original place and continue watering it as usual.
It’s critical to water your plants properly from the beginning and to ensure that they have adequate drainage. If you have a tendency to overwater plants despite your best efforts, it may be advisable to avoid any plants that are more susceptible to overwatering concerns.