The Snake Plant is one of the most popular houseplants since it is one of the easiest to grow. This tenacious succulent, sometimes known as a Snakeskin Plant or Mother-In-Tongue, Law’s has a reputation for being practically indestructible. However, like any other plant, it might succumb to difficulties, leaving you scratching your head, unsure why your snake plant is dying and how to fix it.
What is the cause of my snake plant’s death? Root rot, exposure to high temperature changes, insect infestations, and fungal diseases are the most typical causes of snake plant death. Troubleshooting snake plant issues is extremely simple, and the majority of issues can be discovered and solved quickly.
Read on to learn about the diseases that Snake Plants contract and how to treat them so you can solve the problem properly and promptly. Check out my comprehensive snake plant care post and my guide to growing succulents indoors if you want to learn more about how to care for succulent plants indoors.
How do I know if my snake plant is dying?
Snake plants thrive in hot, sunny conditions, although they prefer to be in the shade, frequently under tree canopies.
In some situations, snake plants can adapt to full sun, although they prefer brilliant indirect light and can even thrive in deep shade.
(Shade can help snake plants develop more slowly.) (For more information on why a snake plant isn’t growing and how to fix it, see my article.)
If the snake plant is relocated from a shady location to bright sunshine, it will burn and develop brown spots on the leaves.
The sunburned areas of the leaf do not recover in appearance, but they do not harm the snake plant, which can live for a long period even if its leaves are sunburned.
However, cutting the damaged leaf blade back to the earth to encourage additional healthy leaf growth is a good idea.
Because the snake plant can become quite top heavy, larger pots with a larger base prevent it from tumbling over. If a snake plant topples over, it might cause bruising.
Key Takeaways:
- Overwatering and moist soils cause the leaves to become yellow or brown and droop, resulting in a dying snake plant. Cold stress can be caused by temperatures below 50°F, resulting in a dying snake plant.
- If the leaves curl, it could be a sign of cold stress if they’ve been exposed to freezing temperatures, or it could be a sign of drought stress because the leaves store water.
- Sunburn is often indicated by brown dots on the leaves. Snake plants prefer bright indirect light, while direct sunlight can cause brown patches.
- To resurrect a dying snake plant, emulate the conditions of its native habitat by watering it seldom, using indirect light, and keeping it warm to avoid cold stress. Take leaf cuttings from healthy tissue to propagate the snake plant if it is dying.
What does an overwatered snake plant look like?
Drooping, yellowing leaves, and easy falling over are all indicators of an overwatered snake plant. To keep the snake plant from dying, remove it from its pot, chop off any rotting roots, and repot it with fresh potting mix. Place the plant in a bright, indirect light source.
Can snake plants come back to life?
Even if you notice your snake plant beginning to dry out or brown a little, it will generally revive on its own. The snake plant, though it appears to be a leafy green, is actually a succulent, which means it has spongy leaves that absorb water.
How do I know if my snake plant is healthy?
Southern blight is a snake plant disease that causes mushy leaves. Sclerotium rolfsii is a fungus that causes this disease.
The fungus can enter the snake plant’s stems, where it consumes the stuff inside.
Before the plant dies, the leaves of your snake plant will become brown and possibly white, and they will feel mushy and soft. This happens when the fungus infects the tissue of your snake plant.
If you don’t take precautionary actions before determining that southern blight is the cause of your snake plant’s squishy leaves, your plant will die within a week.
Measure the Plant’s Height
When you have a baby, you keep an eye on their size to make sure they’re developing normally. Similarly, keeping note of your snake plant’s height over time will help you determine how healthy it is.
A fully mature snake plant leaf can be up to three inches broad and six to eight feet tall when cultivated in a container. You may observe two to four new leaves and three to six inches of fresh height development per season.
If your snake plant isn’t growing at all or isn’t growing as fast as you’d want, you should investigate why.
Many reasons, many of which I’ve already mentioned, can prevent your snake plant from developing as it should.
A snake plant that has been submerged in water or that has been overwatered is unable to flourish. Plant diseases will obstruct growth as well.
A lack of sunlight is also a concern. The snake plant is shade-tolerant, and it can even survive in complete darkness if that’s all you have.
It’s vital to remember that plants growing in low light will not develop as quickly or as robustly as those growing in more perfect lighting circumstances.
Review the Leaf Uprightness
The snake plant is known for its long, sword-like leaves, which have earned it the moniker “mother-in-tongue.” law’s What if the leaves don’t stand straight up as they’re intended to?
Don’t get me wrong: your snake plant’s leaves don’t have to be exactly straight. A few people can lean or even tilt their heads.
When the bulk of the leaves are drooping, stretching, or bending, there is a concern.
What could be causing the snake plant’s leaves to sag? Returning to sunshine, a lack of it can cause your snake plant to become drooping and melancholy.
Your snake plant’s leaves will droop if you overwater it. Because the plant’s roots are so wet, everything immediately becomes floppy and droopy.
Even if you have proper watering habits, if your snake plant doesn’t have enough drainage, its leaves will be anything but upright.
Your snake plant houseplant’s container should ideally have numerous drainage holes, each of which should be large enough to prevent water from becoming trapped in the pot’s bottom.
Water will be trapped in compacted soil. Replace the plant’s soil every few years to avoid this.
The last reason your snake plant’s leaves may be drooping is because of a lack of humidity.
The snake plant does not require high levels of humidity. It prefers a relative humidity of roughly 40%, which is right in the middle of the range for a home or workplace.
Your snake plant’s leaves can bend to the point where they touch the floor if the humidity is very low.
Do the Fingertip Test
When it comes to determining whether or not your snake plant is healthy, the fingertip test will be one of your finest indicators. All you have to do is stick your finger into the soil around your plant and feel around.
What do you have a strong desire for? The majority of the time, it’s moisture. A healthy snake plant has semi-moist soil that is slightly drier than normal but not fully dry.
You should water your snake plant once the earth has totally dried out, but not before that.
Feeling about in the dirt will also allow you to determine how compacted the snake plant’s soil has become, at least to some extent. How is water meant to get to the roots if you can hardly get your fingers into the soil?
It can’t, which implies it’s becoming stuck in the pockets of the dirt. Wet water is bad for the snake plant, so make sure to replace any standing or moist soil as soon as possible.
Root rot can be considerably reduced by replacing any mushy soil in your snake plant’s pot.
If you have a habit of overwatering your snake plant, I recommend learning how to grow it in LECA. Snake plants are an example of an indoor plant that thrives in LECA.
Inspect the Root Ball
When the time comes to remove your snake plant from its present pot, inspect the root ball thoroughly.
The root ball is your plant’s heart and soul, yet it’s something most indoor gardeners don’t get to see very often. What should your snake plant’s root system look like when you examine it?
The roots of a healthy snake plant should be white and solid. If your plant’s roots are brown or black and mushy, it’s suffering from root rot. The decaying roots will have an unpleasant odor as well.
As promised, I’ll speak briefly on root rot. Root rot is a plant-killing disease caused by the presence of more water than oxygen in the roots. Overwatering is the most common cause of root rot, although compacted soil can exacerbate the problem.
The roots will die first, followed by signs such as mushiness and leaf discoloration on your plant. The sickness had already advanced quite far by that stage.
Trim away the dead roots, repot your plant in drier settings, and restrict your watering habits going forward to prevent your plant from root rot.
How do I fix my snake plant drooping?
If your watering schedule appears to be in order, it’s possible that the soil is just storing too much water and needs to be drained.
Repot your plant in cactus or succulent potting mix to fix this. This is a fantastic Snake plant potting mix that I’ve used several times with wonderful results. Alternatively, mix half perlite and a little compost with standard potting soil for added fertility.
Remove as much of the old soil as possible while repotting, and use a large enough pot (see below). When you water, water should immediately come out of the bottom drainage holes, indicating that the soil isn’t effectively drained.
If you pour a cup of water into the soil and it absorbs a lot of water, it’s usually a sign that you need improved drainage.
Why is my snake plant drying out?
Due to a lack of water, a wilting and drying snake plant. Sansevierias will lose their usual form and color if they are not given adequate water. Because water helps plants stay upright, underwatering interrupts the delivery of nutrients throughout the plant.
How do you know when your snake plant needs water?
You’ve chosen a low-maintenance indoor plant. The upkeep of a snake plant is simple. When the soil dries out, water the plant to keep it looking its best. Touching the soil once a week is the best way to detect whether your plant needs watering. It’s time to water when the top inch of soil feels dry.
- Fill a watering can halfway with room temperature water and water your plant. Allow an hour or so for the plant to soak up the water that drains into the saucer. Any water that has been left out for an extended period of time should be discarded. Alternatively, you can submerge the plant in a sink or bathtub and hydrate it with chilly tap water. Allow the plant to completely drain before returning it to its original spot.
- Snake plant care does not necessitate a lot of fertilizer. You can feed the plant with a houseplant fertilizer once or twice a year, following the package guidelines.
Can plants recover from overwatering?
- Even if it’s a full-sun plant, move it to a shady spot. Remove any leaves that are dead or withering. These must be easily distinguishable.
- Check for good drainage in your container and, if necessary, provide more air space around the roots. As a result, oxygen will be able to reach the root zone. Remove any roots that are dead or dying, and preserve only the healthy ones.
- Only water when the soil seems dry to the touch, but not too dry. At this point, you should stop fertilizing the plant until it is healthy again.
Your plant’s ability to recover from overwatering is never guaranteed. Within a week or so, you should notice results if your plant survives. You can now return your plant to its original place and continue watering it as usual.
It’s critical to water your plants properly from the beginning and to ensure that they have adequate drainage. If you have a tendency to overwater plants despite your best efforts, it may be advisable to avoid any plants that are more susceptible to overwatering concerns.
Can you save a snake plant with root rot?
Remove your plant from the pot if it displays signs of root rot and start over with a new soilless mixture. Remove any discolored, mushy roots or leaves before repotting healthy rhizomes in the new mix. If the rhizomes cannot be salvaged, they should be discarded. Save a few healthy leaves for propagation of new snake plants.
Can I cut the brown tips off my snake plant?
To prevent brown tips on snake plants, the best solution is to identify the problem and modify the growing circumstances.
Unfortunately, the harm to existing leaves, as well as the visual impact on your plant, is irreversible. Even if the plant is well-cared for, the leaf damage will persist.
Don’t panic; if you give your snake plant the attention it need, it will produce a large number of healthy leaves, reducing the impact of the brown tips.
You can snip off the brown area of the tip if the damage is minor. Because the tip will not regrow, make sure you cut your plant in a way that you want. Cut the entire leaf off at the soil level if the damage is severe. Soon enough, the rhizome root system will send up new branches.