Southern blight is a snake plant disease that causes mushy leaves. Sclerotium rolfsii is a fungus that causes this disease.
The fungus can enter the snake plant’s stems, where it consumes the stuff inside.
Before the plant dies, the leaves of your snake plant will become brown and possibly white, and they will feel mushy and soft. This happens when the fungus infects the tissue of your snake plant.
If you don’t take precautionary actions before determining that southern blight is the cause of your snake plant’s squishy leaves, your plant will die within a week.
Measure the Plant’s Height
When you have a baby, you keep an eye on their size to make sure they’re developing normally. Similarly, keeping note of your snake plant’s height over time will help you determine how healthy it is.
A fully mature snake plant leaf can be up to three inches broad and six to eight feet tall when cultivated in a container. You may observe two to four new leaves and three to six inches of fresh height development per season.
If your snake plant isn’t growing at all or isn’t growing as fast as you’d want, you should investigate why.
Many reasons, many of which I’ve already mentioned, can prevent your snake plant from developing as it should.
A snake plant that has been submerged in water or that has been overwatered is unable to flourish. Plant diseases will obstruct growth as well.
A lack of sunlight is also a concern. The snake plant is shade-tolerant, and it can even survive in complete darkness if that’s all you have.
It’s vital to remember that plants growing in low light will not develop as quickly or as robustly as those growing in more perfect lighting circumstances.
Review the Leaf Uprightness
The snake plant is known for its long, sword-like leaves, which have earned it the moniker “mother-in-tongue.” law’s What if the leaves don’t stand straight up as they’re intended to?
Don’t get me wrong: your snake plant’s leaves don’t have to be exactly straight. A few people can lean or even tilt their heads.
When the bulk of the leaves are drooping, stretching, or bending, there is a concern.
What could be causing the snake plant’s leaves to sag? Returning to sunshine, a lack of it can cause your snake plant to become drooping and melancholy.
Your snake plant’s leaves will droop if you overwater it. Because the plant’s roots are so wet, everything immediately becomes floppy and droopy.
Even if you have proper watering habits, if your snake plant doesn’t have enough drainage, its leaves will be anything but upright.
Your snake plant houseplant’s container should ideally have numerous drainage holes, each of which should be large enough to prevent water from becoming trapped in the pot’s bottom.
Water will be trapped in compacted soil. Replace the plant’s soil every few years to avoid this.
The last reason your snake plant’s leaves may be drooping is because of a lack of humidity.
The snake plant does not require high levels of humidity. It prefers a relative humidity of roughly 40%, which is right in the middle of the range for a home or workplace.
Your snake plant’s leaves can bend to the point where they touch the floor if the humidity is very low.
Do the Fingertip Test
When it comes to determining whether or not your snake plant is healthy, the fingertip test will be one of your finest indicators. All you have to do is stick your finger into the soil around your plant and feel around.
What do you have a strong desire for? The majority of the time, it’s moisture. A healthy snake plant has semi-moist soil that is slightly drier than normal but not fully dry.
You should water your snake plant once the earth has totally dried out, but not before that.
Feeling about in the dirt will also allow you to determine how compacted the snake plant’s soil has become, at least to some extent. How is water meant to get to the roots if you can hardly get your fingers into the soil?
It can’t, which implies it’s becoming stuck in the pockets of the dirt. Wet water is bad for the snake plant, so make sure to replace any standing or moist soil as soon as possible.
Root rot can be considerably reduced by replacing any mushy soil in your snake plant’s pot.
If you have a habit of overwatering your snake plant, I recommend learning how to grow it in LECA. Snake plants are an example of an indoor plant that thrives in LECA.
Inspect the Root Ball
When the time comes to remove your snake plant from its present pot, inspect the root ball thoroughly.
The root ball is your plant’s heart and soul, yet it’s something most indoor gardeners don’t get to see very often. What should your snake plant’s root system look like when you examine it?
The roots of a healthy snake plant should be white and solid. If your plant’s roots are brown or black and mushy, it’s suffering from root rot. The decaying roots will have an unpleasant odor as well.
As promised, I’ll speak briefly on root rot. Root rot is a plant-killing disease caused by the presence of more water than oxygen in the roots. Overwatering is the most common cause of root rot, although compacted soil can exacerbate the problem.
The roots will die first, followed by signs such as mushiness and leaf discoloration on your plant. The sickness had already advanced quite far by that stage.
Trim away the dead roots, repot your plant in drier settings, and restrict your watering habits going forward to prevent your plant from root rot.
How do you know when your snake plant is dying?
Snake plants thrive in hot, sunny conditions, although they prefer to be in the shade, frequently under tree canopies.
In some situations, snake plants can adapt to full sun, although they prefer brilliant indirect light and can even thrive in deep shade.
(Shade can help snake plants develop more slowly.) (For more information on why a snake plant isn’t growing and how to fix it, see my article.)
If the snake plant is relocated from a shady location to bright sunshine, it will burn and develop brown spots on the leaves.
The sunburned areas of the leaf do not recover in appearance, but they do not harm the snake plant, which can live for a long period even if its leaves are sunburned.
However, cutting the damaged leaf blade back to the earth to encourage additional healthy leaf growth is a good idea.
Because the snake plant can become quite top heavy, larger pots with a larger base prevent it from tumbling over. If a snake plant topples over, it might cause bruising.
Key Takeaways:
- Overwatering and moist soils cause the leaves to become yellow or brown and droop, resulting in a dying snake plant. Cold stress can be caused by temperatures below 50°F, resulting in a dying snake plant.
- If the leaves curl, it could be a sign of cold stress if they’ve been exposed to freezing temperatures, or it could be a sign of drought stress because the leaves store water.
- Sunburn is often indicated by brown dots on the leaves. Snake plants prefer bright indirect light, while direct sunlight can cause brown patches.
- To resurrect a dying snake plant, emulate the conditions of its native habitat by watering it seldom, using indirect light, and keeping it warm to avoid cold stress. Take leaf cuttings from healthy tissue to propagate the snake plant if it is dying.
What does a snake plant look like when it needs water?
Due to dehydration, a snake plant that has been submerged will have wrinkling and curling leaves with brown tips. If the plant is kept in dry soil for too long, it will begin to fall over and may die. To immediately rehydrate and revitalize your snake plant, move it to a shaded spot and immerse the pot with water.
What does a unhealthy snake plant look like?
Southern blight and red leaf spot are two fungal diseases that can affect snake plants. The appearance of the plant might help you identify these issues. The leaves are usually the ones that are impacted. They may have sunken reddish-brown lesions or a white web-like growth that hardens and turns dark brown. Because fungal infections can cause the snake plant to wilt, rot, and die, eliminating them should be a top focus. Maintain proper cultural practices, such as keeping the leaves dry, keeping track of watering, and providing well-drained soil and ideal temperatures.
What does an overwatered snake plant look like?
Drooping, yellowing leaves, and easy falling over are all indicators of an overwatered snake plant. To keep the snake plant from dying, remove it from its pot, chop off any rotting roots, and repot it with fresh potting mix. Place the plant in a bright, indirect light source.
How do I keep my snake plant healthy?
Allow the soil to dry in between waterings, and avoid overwatering in the winter. When watering, try to avoid getting the leaves wet. Place your snake plants in indirect light (though they may tolerate a variety of light situations) and fertilize with an all-purpose plant food during the growing season.
Why is my snake plant shriveling?
Underwatering, excessive temperatures, or too much sunlight can cause a wrinkled snake plant. To mend the wrinkled leaves, move the plant to a location where it will receive brilliant indirect light and only water the soil. To keep sansevieria healthy, keep the temperature between 55 and 85 degrees Fahrenheit.
Although most snake plant wrinkling is caused by either overwatering or a lack of water, the use of the incorrect soil type and fertilizers can also cause your snake plant leaves to wrinkle.
Should you mist snake plants?
If you have indoor houseplants, you are probably aware of the habit of spraying the leaves to keep them from drying out. Snake plants are one of the simplest plants to grow and care for. But, given snake plants’ minimal water requirements, do their leaves require the extra water? We checked with horticultural professionals to see what they had to say.
Snake plants are desert plants that thrive in hot, humid environments. Having said that, misting the leaves of a snake plant is generally not suggested. Misting the leaves of the snake plant can cause them to get overwatered, which can lead to a variety of health problems. Because they acquire their moisture from the humidity in their environment, their leaves are used to keeping dry.
Overwatering is the most typical reason for a snake plant’s failure to thrive, especially in the hands of inexperienced growers. Continue reading to learn more about how to water snake plants properly.
What does a dry snake plant look like?
First and foremost, check the appearance of the snake plant’s leaves to see if it has been submerged. The first sign that your snake plants are dry is the appearance of brown tips on the leaves. When you touch the tips, they are usually dry and crispy. The brown region starts to grow down from the tips and down the margins after the earth has been dry for a while. The leaves can get wrinkled and shriveled. The leaves can begin to curl at any time. To the touch, the brown sections seem dry, thin, and papery. If the leaves are submerged for an extended period of time, they may bend over, become limp, and die.
The oldest leaves may become brown and then yellow all throughout. Yellow leaves might indicate either too wet or too dry soil conditions. This can be a little perplexing. The texture of the leaf, rather than its color, is the most noticeable feature. You’re overwatering the plant if the damaged leaf section is mushy or pulpy. Plants that have been underwatered have dry, brittle leaf tips or edges. Plants of this type usually develop slowly.
Why do snake plant leaves turn brown?
Snake plants (Sansevieria trifasciata) are known for their hardiness. That’s presumably why they’re so common in many households. Even the toughest plants have their limits, and brown tips on snake plant leaves are one symptom of a problem.
Why do the leaves of your snake plant have brown tips? The most common cause of brown tips on a snake plant is;
These “indestructible” plants are advertised to be low-maintenance, but they won’t grow or look their best unless you provide them the correct circumstances. Continue reading to learn how to mend a snake plant with brown tips and how to avoid it in the future.
Do snake plants need sunlight?
- Plants can grow in a wide range of light conditions, from low to high. They grow faster in brighter light, but direct sunshine, especially when plants are outside, burns leaves. A 10 foot distance from a west or south window is excellent.
- Use a commercial potting soil mixed 50:50 with a cactus and succulent mix when potting snake plants. This results in a loose, quick-draining soil with many air spaces, which should help minimize overwatering.
- Fertilizer: These slow-growing plants don’t require much in the way of fertilizer. Snake plants should be fed any houseplant food twice a year, once in the spring and once in the summer. These plants are low-maintenance.
- Snake plants do well in hot, dry environments. For the summer, consider placing potted ones in bright shade outside. They will flourish in the landscape where there is no frost or snow. Just make sure these plants aren’t invasive in your area by checking with local nurseries.
- Snake plants are slow-growing and rarely require repotting (they actually grow better when pot-bound). Low-light plants may need to be repotted every 5 to 10 years. Expect to transfer snake plants in stronger light every 3 to 5 years.