Overwatering is one of the most prevalent issues with snake plants (and other succulents). These plants don’t perform well in wet soil and are prone to root rot. Follow these watering guidelines to avoid this:
- Tip: Don’t merely look at the surface of the soil to determine whether it’s time to water. Instead, gently poke a few of inches into the dirt with your finger or a wooden chopstick. Hold off on watering if you feel any dampness or see dirt attach to the chopstick.
- If at all feasible, use water from the pot’s bottom. This promotes the roots to grow deep and downward, which helps to keep the thick, tall leaves in place.
- Water less frequently during the winter, when the plant isn’t actively developing, than you would in the spring and summer.
- Dust collects on the large, flat leaves, so wipe them clean with a moist cloth as needed.
- Snake plants grow quickly in good conditions and may need to be divided every year.
- In the spring, divide and repot the plants. Remove a portion of the plant that includes both leaves and roots and place it in a pot with well-draining potting soil.
- If a snake plant is kept in a pot, it may flower once in a while. On towering spikes, fragrant greenish-white flower clusters develop.
How often should you water a snake plant?
Your Snake Plant only needs to be watered every two weeks, and you should let the soil dry completely between waterings to avoid overwatering and root rot. If the soil is still moist after two weeks, water your snake plant once a month throughout the winter months.
What is the best way to care for a snake plant?
Plant Care for Snakes Place them in shady areas and don’t overwater them, especially in the winter. It’s actually preferable to let these plants dry out between waterings. If the plants are in a pot, a small amount of general purpose fertilizer can be used, but that’s it.
How do I know if my snake plant is healthy?
Southern blight is a snake plant disease that causes mushy leaves. Sclerotium rolfsii is a fungus that causes this disease.
The fungus can enter the snake plant’s stems, where it consumes the stuff inside.
Before the plant dies, the leaves of your snake plant will become brown and possibly white, and they will feel mushy and soft. This happens when the fungus infects the tissue of your snake plant.
If you don’t take precautionary actions before determining that southern blight is the cause of your snake plant’s squishy leaves, your plant will die within a week.
Measure the Plant’s Height
When you have a baby, you keep an eye on their size to make sure they’re developing normally. Similarly, keeping note of your snake plant’s height over time will help you determine how healthy it is.
A fully mature snake plant leaf can be up to three inches broad and six to eight feet tall when cultivated in a container. You may observe two to four new leaves and three to six inches of fresh height development per season.
If your snake plant isn’t growing at all or isn’t growing as fast as you’d want, you should investigate why.
Many reasons, many of which I’ve already mentioned, can prevent your snake plant from developing as it should.
A snake plant that has been submerged in water or that has been overwatered is unable to flourish. Plant diseases will obstruct growth as well.
A lack of sunlight is also a concern. The snake plant is shade-tolerant, and it can even survive in complete darkness if that’s all you have.
It’s vital to remember that plants growing in low light will not develop as quickly or as robustly as those growing in more perfect lighting circumstances.
Review the Leaf Uprightness
The snake plant is known for its long, sword-like leaves, which have earned it the moniker “mother-in-tongue.” law’s What if the leaves don’t stand straight up as they’re intended to?
Don’t get me wrong: your snake plant’s leaves don’t have to be exactly straight. A few people can lean or even tilt their heads.
When the bulk of the leaves are drooping, stretching, or bending, there is a concern.
What could be causing the snake plant’s leaves to sag? Returning to sunshine, a lack of it can cause your snake plant to become drooping and melancholy.
Your snake plant’s leaves will droop if you overwater it. Because the plant’s roots are so wet, everything immediately becomes floppy and droopy.
Even if you have proper watering habits, if your snake plant doesn’t have enough drainage, its leaves will be anything but upright.
Your snake plant houseplant’s container should ideally have numerous drainage holes, each of which should be large enough to prevent water from becoming trapped in the pot’s bottom.
Water will be trapped in compacted soil. Replace the plant’s soil every few years to avoid this.
The last reason your snake plant’s leaves may be drooping is because of a lack of humidity.
The snake plant does not require high levels of humidity. It prefers a relative humidity of roughly 40%, which is right in the middle of the range for a home or workplace.
Your snake plant’s leaves can bend to the point where they touch the floor if the humidity is very low.
Do the Fingertip Test
When it comes to determining whether or not your snake plant is healthy, the fingertip test will be one of your finest indicators. All you have to do is stick your finger into the soil around your plant and feel around.
What do you have a strong desire for? The majority of the time, it’s moisture. A healthy snake plant has semi-moist soil that is slightly drier than normal but not fully dry.
You should water your snake plant once the earth has totally dried out, but not before that.
Feeling about in the dirt will also allow you to determine how compacted the snake plant’s soil has become, at least to some extent. How is water meant to get to the roots if you can hardly get your fingers into the soil?
It can’t, which implies it’s becoming stuck in the pockets of the dirt. Wet water is bad for the snake plant, so make sure to replace any standing or moist soil as soon as possible.
Root rot can be considerably reduced by replacing any mushy soil in your snake plant’s pot.
If you have a habit of overwatering your snake plant, I recommend learning how to grow it in LECA. Snake plants are an example of an indoor plant that thrives in LECA.
Inspect the Root Ball
When the time comes to remove your snake plant from its present pot, inspect the root ball thoroughly.
The root ball is your plant’s heart and soul, yet it’s something most indoor gardeners don’t get to see very often. What should your snake plant’s root system look like when you examine it?
The roots of a healthy snake plant should be white and solid. If your plant’s roots are brown or black and mushy, it’s suffering from root rot. The decaying roots will have an unpleasant odor as well.
As promised, I’ll speak briefly on root rot. Root rot is a plant-killing disease caused by the presence of more water than oxygen in the roots. Overwatering is the most common cause of root rot, although compacted soil can exacerbate the problem.
The roots will die first, followed by signs such as mushiness and leaf discoloration on your plant. The sickness had already advanced quite far by that stage.
Trim away the dead roots, repot your plant in drier settings, and restrict your watering habits going forward to prevent your plant from root rot.
Do snake plants need direct sunlight?
- Plants can grow in a wide range of light conditions, from low to high. They grow faster in brighter light, but direct sunshine, especially when plants are outside, burns leaves. A 10 foot distance from a west or south window is excellent.
- Use a commercial potting soil mixed 50:50 with a cactus and succulent mix when potting snake plants. This results in a loose, quick-draining soil with many air spaces, which should help minimize overwatering.
- Fertilizer: These slow-growing plants don’t require much in the way of fertilizer. Snake plants should be fed any houseplant food twice a year, once in the spring and once in the summer. These plants are low-maintenance.
- Snake plants do well in hot, dry environments. For the summer, consider placing potted ones in bright shade outside. They will flourish in the landscape where there is no frost or snow. Just make sure these plants aren’t invasive in your area by checking with local nurseries.
- Snake plants are slow-growing and rarely require repotting (they actually grow better when pot-bound). Low-light plants may need to be repotted every 5 to 10 years. Expect to transfer snake plants in stronger light every 3 to 5 years.
Where should I keep my snake plant?
- Select a container with a drainage hole in the bottom. Snake plants thrive in terra cotta pots, which allow the soil to dry out more quickly than plastic pots.
- Use a potting mix that drains effectively. It’s best to use a potting mix made for “cacti and succulents,” as it’ll be less likely to become waterlogged.
- Don’t bury snake plants too deeply while repotting them. The plant should be placed at the same depth as it was in its previous container.
Choosing a Location in the Home
- Snake plants love bright, indirect light, but they may handle some direct sunshine as well. They do, however, grow nicely in shady corners and other low-light regions of the house (albeit more slowly).
- Avoid transferring your plant from a low-light area to direct sunshine too rapidly, since this may cause it to shock. When moving plants from a darker to a lighter place, do so gradually over a week or so, gradually exposing them to brighter and brighter light. Also, alter your watering practices accordingly; plants in warmer, brighter places will require more water.
- Maintain a warm environment for the plant, with temperatures over 50°F (10°C). In the winter, make sure the windows aren’t drafty.
How can I make my snake plant grow faster?
Optimizing the care conditions and avoiding any sources of stress will help your Snake Plant develop as quickly as possible. Providing lots of light, adequate but not excessive water, and a small amount of fertilizer 2-3 times each year are the best approaches to assure rapid growth.
In the winter, a Snake Plant will stop growing since the light levels are insufficient to support new development. If you want to keep your Snake Plant growing all year, you can use a grow lamp to increase the amount of light it receives.
During the winter, I usually use a number of grow lights for my houseplants, primarily to keep them from decaying, but also to encourage some new growth.
How do I clean my snake plant leaves?
Water, as previously said, is the most effective tool for removing dirt from plant leaves.
So there’s no need to apply anything special here, especially if all you want to do is clean the surface.
Note: You can use a plastic sheet to cover the soil while doing this step.
Does snake plant attract snakes?
The Snake plant’s leaves do resemble snakes, albeit they are always green or yellow in color.
They frequently search for other insects and animals that like to hide in open areas such as gardens.
Snakes don’t want to hang out near Snake plants since their leaves have sharp edges.
Can you trim a snake plant?
Snake plants are known for their hardiness and sluggish growth, so they will likely tolerate trimming at any time of year. However, it is preferable to prune your plant when it is actively developing, particularly in spring or early summer, to give it the best chance of prospering after pruning.
Pruning a snake plant causes it to get stressed, therefore if your snake plant is sick, it’s best to improve general care first, encourage some new healthy growth, and then prune your snake plant to aid speedy recovery.