- For 10 minutes, soak the snake plant in a basin of water. Submerging the root ball for 10 minutes if the snake plant soil repels watering from the surface permits the snake plant roots to suck up much-needed water.
- Always immerse your plants with water. Watering too lightly moistens only the top inch or two of soil, preventing moisture from penetrating and reaching the roots. Water well so that any excess water drains through the drainage holes in the base. This is a wonderful technique to detect if you’ve hydrated the plant thoroughly enough to keep it healthy.
- Replace the soil if water is flowing off the surface of your snake plant and the soil beneath the surface feels dry. Snake plants should be grown in a particular succulent and cactus soil that closely resembles the well-draining, porous soils found in their natural habitat. Even when it is dry, the succulent and cactus soil allows water to penetrate effectively and does not bake hard like some potting mixes.
Your drought-stressed snake plant should show signs of recovery in the next week with regular watering techniques and an initial 10-minute soak in water.
Instead of decaying, the curled in leaves can begin to store water again and reestablish a plump full texture.
Reviving Cold Damaged Snake Plants
If your snake plant has been exposed to temperatures below 50°F (10°C), it will recover once placed in a room that is consistently warmer than 50°F (10°C).
However, if your snake plant’s leaves have regions of white that feel mushy, they are unlikely to recover.
To prevent the damage from spreading, cut the injured leaf blades back down to the earth with a sterile set of pruners.
How do I save my dying snake plant?
Snake plants thrive in hot, sunny conditions, although they prefer to be in the shade, frequently under tree canopies.
In some situations, snake plants can adapt to full sun, although they prefer brilliant indirect light and can even thrive in deep shade.
(Shade can help snake plants develop more slowly.) (For more information on why a snake plant isn’t growing and how to fix it, see my article.)
If the snake plant is relocated from a shady location to bright sunshine, it will burn and develop brown spots on the leaves.
The sunburned areas of the leaf do not recover in appearance, but they do not harm the snake plant, which can live for a long period even if its leaves are sunburned.
However it can be a good idea to clip the damaged leaf blade back to the earth to encourage more growth of healthy leaves.
Because the snake plant can become quite top heavy, larger pots with a larger base prevent it from tumbling over. If a snake plant topples over, it might cause bruising.
Key Takeaways:
- Overwatering and moist soils cause the leaves to become yellow or brown and droop, resulting in a dying snake plant. Cold stress can be caused by temperatures below 50°F, resulting in a dying snake plant.
- If the leaves curl, it could be a sign of cold stress if they’ve been exposed to freezing temperatures, or it could be a sign of drought stress because the leaves store water.
- Sunburn is often indicated by brown dots on the leaves. Snake plants prefer bright indirect light, while direct sunlight can cause brown patches.
- To resurrect a dying snake plant, emulate the conditions of its native habitat by watering it seldom, using indirect light, and keeping it warm to avoid cold stress. Take leaf cuttings from healthy tissue to propagate the snake plant if it is dying.
Can snake plants come back to life?
Even if you notice your snake plant beginning to dry out or brown a little, it will generally revive on its own. The snake plant, though it appears to be a leafy green, is actually a succulent, which means it has spongy leaves that absorb water.
How do you regenerate a snake plant?
This approach is quite similar to the water method, except that it skips a step. Allow a day or two for the cut end of the leaf to callus, then place it in a container of lightly moist sand. After a few weeks, the plant will begin to root on its own.
Snake Plant Propagation from Division
Rhizomes are thick, under-the-soil organs that give rise to the mother-in-law tongue plant. The energy for leaf and stem growth is stored in them. Remove the plant from its pot and cut the base into parts using sharp scissors or a hand saw. Unless the plant is quite old and has a lot of rhizomes, you can usually just cut it in half. A reasonable rule of thumb is that each new plant should have at least three rhizomes and one healthy leaf. Each new piece should be planted in fresh potting material.
Why is my snake plant shriveling?
Underwatering, excessive temperatures, or too much sunlight can cause a wrinkled snake plant. To mend the wrinkled leaves, move the plant to a location where it will receive brilliant indirect light and only water the soil. To keep sansevieria healthy, keep the temperature between 55 and 85 degrees Fahrenheit.
Although most snake plant wrinkling is caused by either overwatering or a lack of water, the use of the incorrect soil type and fertilizers can also cause your snake plant leaves to wrinkle.
How do I fix my snake plant drooping?
If your watering schedule appears to be in order, it’s possible that the soil is just storing too much water and needs to be drained.
Repot your plant in cactus or succulent potting mix to fix this. This is a fantastic Snake plant potting mix that I’ve used several times with wonderful results. Alternatively, mix half perlite and a little compost with standard potting soil for added fertility.
Remove as much of the old soil as possible while repotting, and use a large enough pot (see below). When you water, water should immediately come out of the bottom drainage holes, indicating that the soil isn’t effectively drained.
If you pour a cup of water into the soil and it absorbs a lot of water, it’s usually a sign that you need improved drainage.
What does a dying snake plant look like?
Root rot, which is caused by overwatering, is the most common problem with Snake Plants, especially during the winter months. The roots then die back due to a lack of oxygen or a soil fungus overgrowth. Soggy soils promote the growth and reproduction of Pythium, Phytophthora, Rhizoctonia, and Fusarium fungi, which attack plants by spreading into the roots. As healthy roots die, they turn dark and mushy, unable to absorb the nutrients required for growth.
Root rot is difficult to detect since it develops beneath the soil surface and out of sight. Root rot can kill an entire plant in 10 days if the conditions are ideal, such as in pots without drainage holes.
While snake plants will struggle to live in pots without drainage holes, there are a few creative solutions to this problem that you might not consider. To learn how to grow plants in pots without holes, read my post.
Although it is necessary to pot your snake plant in a well-draining pot, you also want your plant to look good and add to the attractiveness of your home. You may have some ornamental pots with adequate drainage in which to plant your snake plant, but I prefer to place it on a drip tray or within a more elegant planter. Here are some of my favorite indoor planter designs.
Symptoms
The rot is first visible on the roots, causing them to turn dark and mushy, which are classic indicators of rot. Root rot causes leaves to turn yellow, wilt, or droop, and eventually become mushy. Once symptoms appear in the leaves, the condition may be beyond repair, putting the entire plant in jeopardy.
Treatment
If you catch the problem early enough, you can repot the plant. Remove as much diseased soil as possible before replacing it with new, clean potting soil. To assist avoid reinfection, apply a root treatment with helpful mycorrhizal species or sprinkle the healthy roots with sulfur powder. Sulfur acidifies the soil, making some nutrients less available and limiting the food source for pathogens that cause root rot. Beneficial mycorrhizae create a hostile environment for unwanted bacteria and fungi; sulfur acidifies the soil, making some nutrients less available and limiting the food source for pathogens that cause root rot.
If the root rot has progressed far enough, dissect the plant and keep just the healthy parts. Take cuttings from healthy foliage and root them to propagate a new plant if the entire base is compromised.
Prevention
When the top 2-4″ of the soil has completely dried up, water the plants. During the cooler, winter months, when the plant is dormant, this could mean just watering it every 1-2 months.
Snake plants are perfect for the less-than-careful gardener. For weeks at a time, you can go without watering them. Your snake plant will easily endure 3 weeks or more without water, even in hot, arid conditions, so you won’t have to bother about all the methods to water houseplants while on vacation.
Do snake plants need sunlight?
- Plants can grow in a wide range of light conditions, from low to high. They grow faster in brighter light, but direct sunshine, especially when plants are outside, burns leaves. A 10 foot distance from a west or south window is excellent.
- Use a commercial potting soil mixed 50:50 with a cactus and succulent mix when potting snake plants. This results in a loose, quick-draining soil with many air spaces, which should help minimize overwatering.
- Fertilizer: These slow-growing plants don’t require much in the way of fertilizer. Snake plants should be fed any houseplant food twice a year, once in the spring and once in the summer. These plants are low-maintenance.
- Snake plants do well in hot, dry environments. For the summer, consider placing potted ones in bright shade outside. They will flourish in the landscape where there is no frost or snow. Just make sure these plants aren’t invasive in your area by checking with local nurseries.
- Snake plants are slow-growing and rarely require repotting (they actually grow better when pot-bound). Low-light plants may need to be repotted every 5 to 10 years. Expect to transfer snake plants in stronger light every 3 to 5 years.
What does an overwatered snake plant look like?
Drooping, yellowing leaves, and easy falling over are all indicators of an overwatered snake plant. To keep the snake plant from dying, remove it from its pot, chop off any rotting roots, and repot it with fresh potting mix. Place the plant in a bright, indirect light source.
How do you cut dead snake leaves?
Grasp the leaf with the dead foliage below the brown foliage’s end. The entire leaf may be dead in certain circumstances, whereas only the tip of the leaf may be dead in others. As near to the soil as feasible, make a straight cut through the leaf.
How often should you water snake plants?
Always check your plant’s watering requirements as soon as you get it. Check the moisture level in the soil first to make sure it isn’t soggy in the root zone before giving your plant a drink. Consider aerating your plant’s soil before watering it for the first time. Aerating the soil allows it to breathe and release moisture.
A soil probe, which allows you to monitor your plant’s moisture level at the root level and can also be used to aerate the soil if overwatered, is the best tool we’ve discovered to get an accurate moisture reading throughout the soil. Soil probes have proven to be an invaluable aid in keeping snake plants alive and well. The Monitor Brass Soil Probe is a stylish choice.
Between waterings, Sansevieria prefers to dry fully. Overwatering is the most typical mistake made with these plants. You won’t need to water your plant more than once every 10 days (at most) during the growing season, even if it’s in plenty of bright indirect light. Watering might be as seldom as once a month during the cold months or if the plant is in low light. Regardless of where you put it, make sure the soil on your Sansevieria is completely dry between waterings. Because Sansevieria is prone to root rot, it’s critical not to water the plant if the soil in the root zone at the plant’s base is damp.
Rotate your plant on a regular basis to guarantee even development on all sides, and dust the leaves frequently to ensure optimal photosynthetic activity. Take advantage of the opportunity to dust the leaves and inspect the undersides for bugs while you’re at it. Once every couple of months, clean your leaves with a microfiber cloth and a fine-spray mister.
Note that if you’re potting your snake plant in an organic container, you need use a waterproof saucer underneath to protect your floors and table tops, as humidity can build up beneath the pot and damage surfaces.
Remember that each plant is a unique living organism with distinct needs, especially in its own environment. Pay attention to your Sansevieria’s health and watering requirements, and you’ll enjoy a long and happy relationship.