It’s simple with the watering it’s crucial for Snake Plant upkeep. You must be careful not to overwater your plant or it may rot. Before thoroughly watering again, ensure sure the soil is almost entirely dry.
Every 2-8 weeks, water your Snake Plants. Depending on your home environment, type of soil mix, and pot size, you’ll need to adjust your watering plan.
To obtain a better concept of how to determine a watering schedule, see my Guide to Watering Indoor Plants.
In the winter, when the temperatures are milder and the sun is less intense, I water my Snake Plants less frequently (every 8 weeks for those in large pots). Your houseplants prefer to rest at this time of year.
Allow no water to collect in the center of the leaves (where they form a cup), since this will result in a mushy plant that will eventually perish.
Light
Sansevierias prefer medium light (approximately 10 feet away from a west or south window), although they may also endure low and high light. They’re so adaptable!
Note: The darker leafed species and variations (such as S. trifasciata and Sansevieria hanhnii jade) do better under reduced light situations and are the ones you should buy. In low light, snake plants with brighter variegations become less vivid and patterned.
Snake Plants should be kept out of direct sunlight (west or south window) because they will burn in a heartbeat.
Air Circulation
The dry, stale air in our homes and offices doesn’t bother these plants. They’ll also work well in restrooms, which have significantly higher humidity levels. Another quality that earns this houseplant the moniker “diehard” is its adaptability.
How often do you water a snake plant?
Your Snake Plant only needs to be watered every two weeks, and you should let the soil dry completely between waterings to avoid overwatering and root rot. If the soil is still moist after two weeks, water your snake plant once a month throughout the winter months.
How do you care for an indoor snake plant?
Allow the soil to dry in between waterings, and avoid overwatering in the winter. When watering, try to avoid getting the leaves wet. Place your snake plants in indirect light (though they may tolerate a variety of light situations) and fertilize with an all-purpose plant food during the growing season.
Do snake plants need sunlight?
- Plants can grow in a wide range of light conditions, from low to high. They grow faster in brighter light, but direct sunshine, especially when plants are outside, burns leaves. A 10 foot distance from a west or south window is excellent.
- Use a commercial potting soil mixed 50:50 with a cactus and succulent mix when potting snake plants. This results in a loose, quick-draining soil with many air spaces, which should help minimize overwatering.
- Fertilizer: These slow-growing plants don’t require much in the way of fertilizer. Snake plants should be fed any houseplant food twice a year, once in the spring and once in the summer. These plants are low-maintenance.
- Snake plants do well in hot, dry environments. For the summer, consider placing potted ones in bright shade outside. They will flourish in the landscape where there is no frost or snow. Just make sure these plants aren’t invasive in your area by checking with local nurseries.
- Snake plants are slow-growing and rarely require repotting (they actually grow better when pot-bound). Low-light plants may need to be repotted every 5 to 10 years. Expect to transfer snake plants in stronger light every 3 to 5 years.
Should I mist my snake plant?
If you have indoor houseplants, you are probably aware of the habit of spraying the leaves to keep them from drying out. Snake plants are one of the simplest plants to grow and care for. But, given snake plants’ minimal water requirements, do their leaves require the extra water? We checked with horticultural professionals to see what they had to say.
Snake plants are desert plants that thrive in hot, humid environments. Having said that, misting the leaves of a snake plant is generally not suggested. Misting the leaves of the snake plant can cause them to get overwatered, which can lead to a variety of health problems. Because they acquire their moisture from the humidity in their environment, their leaves are used to keeping dry.
Overwatering is the most typical reason for a snake plant’s failure to thrive, especially in the hands of inexperienced growers. Continue reading to learn more about how to water snake plants properly.
Where should I keep my snake plant?
- Select a container with a drainage hole in the bottom. Snake plants thrive in terra cotta pots, which allow the soil to dry out more quickly than plastic pots.
- Use a potting mix that drains effectively. It’s best to use a potting mix made for “cacti and succulents,” as it’ll be less likely to become waterlogged.
- Don’t bury snake plants too deeply while repotting them. The plant should be placed at the same depth as it was in its previous container.
Choosing a Location in the Home
- Snake plants love bright, indirect light, but they may handle some direct sunshine as well. They do, however, grow nicely in shady corners and other low-light regions of the house (albeit more slowly).
- Avoid transferring your plant from a low-light area to direct sunshine too rapidly, since this may cause it to shock. When moving plants from a darker to a lighter place, do so gradually over a week or so, gradually exposing them to brighter and brighter light. Also, alter your watering practices accordingly; plants in warmer, brighter places will require more water.
- Maintain a warm environment for the plant, with temperatures over 50°F (10°C). In the winter, make sure the windows aren’t drafty.
How do I know if my snake plant is healthy?
Southern blight is a snake plant disease that causes mushy leaves. Sclerotium rolfsii is a fungus that causes this disease.
The fungus can enter the snake plant’s stems, where it consumes the stuff inside.
Before the plant dies, the leaves of your snake plant will become brown and possibly white, and they will feel mushy and soft. This happens when the fungus infects the tissue of your snake plant.
If you don’t take precautionary actions before determining that southern blight is the cause of your snake plant’s squishy leaves, your plant will die within a week.
Measure the Plant’s Height
When you have a baby, you keep an eye on their size to make sure they’re developing normally. Similarly, keeping note of your snake plant’s height over time will help you determine how healthy it is.
A fully mature snake plant leaf can be up to three inches broad and six to eight feet tall when cultivated in a container. You may observe two to four new leaves and three to six inches of fresh height development per season.
If your snake plant isn’t growing at all or isn’t growing as fast as you’d want, you should investigate why.
Many reasons, many of which I’ve already mentioned, can prevent your snake plant from developing as it should.
A snake plant that has been submerged in water or that has been overwatered is unable to flourish. Plant diseases will obstruct growth as well.
A lack of sunlight is also a concern. The snake plant is shade-tolerant, and it can even survive in complete darkness if that’s all you have.
It’s vital to remember that plants growing in low light will not develop as quickly or as robustly as those growing in more perfect lighting circumstances.
Review the Leaf Uprightness
The snake plant is known for its long, sword-like leaves, which have earned it the moniker “mother-in-tongue.” law’s What if the leaves don’t stand straight up as they’re intended to?
Don’t get me wrong: your snake plant’s leaves don’t have to be exactly straight. A few people can lean or even tilt their heads.
When the bulk of the leaves are drooping, stretching, or bending, there is a concern.
What could be causing the snake plant’s leaves to sag? Returning to sunshine, a lack of it can cause your snake plant to become drooping and melancholy.
Your snake plant’s leaves will droop if you overwater it. Because the plant’s roots are so wet, everything immediately becomes floppy and droopy.
Even if you have proper watering habits, if your snake plant doesn’t have enough drainage, its leaves will be anything but upright.
Your snake plant houseplant’s container should ideally have numerous drainage holes, each of which should be large enough to prevent water from becoming trapped in the pot’s bottom.
Water will be trapped in compacted soil. Replace the plant’s soil every few years to avoid this.
The last reason your snake plant’s leaves may be drooping is because of a lack of humidity.
The snake plant does not require high levels of humidity. It prefers a relative humidity of roughly 40%, which is right in the middle of the range for a home or workplace.
Your snake plant’s leaves can bend to the point where they touch the floor if the humidity is very low.
Do the Fingertip Test
When it comes to determining whether or not your snake plant is healthy, the fingertip test will be one of your finest indicators. All you have to do is stick your finger into the soil around your plant and feel around.
What do you have a strong desire for? The majority of the time, it’s moisture. A healthy snake plant has semi-moist soil that is slightly drier than normal but not fully dry.
You should water your snake plant once the earth has totally dried out, but not before that.
Feeling about in the dirt will also allow you to determine how compacted the snake plant’s soil has become, at least to some extent. How is water meant to get to the roots if you can hardly get your fingers into the soil?
It can’t, which implies it’s becoming stuck in the pockets of the dirt. Wet water is bad for the snake plant, so make sure to replace any standing or moist soil as soon as possible.
Root rot can be considerably reduced by replacing any mushy soil in your snake plant’s pot.
If you have a habit of overwatering your snake plant, I recommend learning how to grow it in LECA. Snake plants are an example of an indoor plant that thrives in LECA.
Inspect the Root Ball
When the time comes to remove your snake plant from its present pot, inspect the root ball thoroughly.
The root ball is your plant’s heart and soul, yet it’s something most indoor gardeners don’t get to see very often. What should your snake plant’s root system look like when you examine it?
The roots of a healthy snake plant should be white and solid. If your plant’s roots are brown or black and mushy, it’s suffering from root rot. The decaying roots will have an unpleasant odor as well.
As promised, I’ll speak briefly on root rot. Root rot is a plant-killing disease caused by the presence of more water than oxygen in the roots. Overwatering is the most common cause of root rot, although compacted soil can exacerbate the problem.
The roots will die first, followed by signs such as mushiness and leaf discoloration on your plant. The sickness had already advanced quite far by that stage.
Trim away the dead roots, repot your plant in drier settings, and restrict your watering habits going forward to prevent your plant from root rot.
How long can snake plant go without water?
This irresponsibility is why I’m so smitten with my hardy snake plant. Sansevierias, sometimes known as snake plants or mother-in-tongues, law’s are the polar opposite of other plants that are high-maintenance and borderline dramatic (cough, cough: the fiddle-leaf fig). Indeed, these dependable greens are so hardy that they may survive for up to two weeks without water. Yes, you read that correctlytwo weeks without drinking any water.
Do snake plants clean the air?
The snake plant (also known as mother-in-tongue) law’s is another popular houseplant with a variety of air-cleaning properties. It eliminates formaldehyde, xylene, and nitrogen oxides from the air during the day and keeps working at night. Many plants leak carbon dioxide into the air after the sun sets, but snake plants continue to convert carbon dioxide into oxygen, so you might want to keep this one in your bedroom.
They’re really difficult to eliminate once more. They require little irrigation and can endure lower light levels. Your bedroom’s fantasy.
Can a snake plant live in a room with no windows?
For offices and darker houses, there are a few tried-and-true plants. Among them are the following:
- Snake plant, also known as mother-in-tongue, law’s is characterized by sword-like, rigid leaves with attractive green and gold patterns.
- The cast iron plant is a unique plant that grows to be 24 inches (61 cm) tall. Its name says it all: it can withstand low light, as well as humidity, dust, and general neglect.
- Another plant with sword-like leaves that produces a creamy white spathe that resembles a large cupped flower is the peace lily. It prefers moist soil and moderate temperatures inside.
- Dracaena and philodendrons come in a variety of shapes and sizes, with variegated leaves or bursts of alternate color, and are excellent choices for indoor plants in low light.