The rubber plant’s leaves becoming dark on the edges indicates that it has been overwatered or has acquired root rot.
The plant will show indicators such as yellow or brown leaves on the edges, droopy leaves, and eventually fall off the plant in this situation.
To alleviate the situation, we should try removing the afflicted leaves from the plant.
The rubber tree plant prefers strong indirect light, and if we maintain it in direct sunlight, the Ficus Elastica leaves will burn.
To avoid this, we should keep the plant in the shade or on a patio. It’s also a good idea to hide it beneath a sheer curtain.
Why are the leaves falling off my rubber plant?
A change in the light is a common cause of a rubber plant losing its leaves. This frequently occurs when you move your rubber tree plant inside from the outside, and the change can result in the rubber tree leaves dropping completely. When the light levels shift from summer to fall, a few rubber tree leaves may fall off the plant.
When you bring the rubber tree indoors, acclimating it gently and shining a few plant lights on it can assist keep the light levels up and prevent the rubber tree from losing leaves.
Pests – Another typical cause of rubber tree plant leaves falling off is pests. Rubber tree plants, in particular, are subject to scale bug infestations, which cause the leaves to fall off unless the plant is treated.
How do I know my rubber plant is dying?
Rubber plants despise sitting in water, therefore this will destroy your plant faster than underwatering. Overwatering your plant can cause root rot, which causes the plant to become unstable and unable to obtain vital nutrients through its root system. Root rot is one of the most common causes of houseplant death, and it must be treated right away.
Overwatering is indicated by the yellowing or browning of the lower leaves of your rubber plant. Check the moisture level in the soil and adjust the irrigation accordingly. If the potting soil becomes waterlogged, refill it right away (rather than waiting for it to dry out naturally) so that the roots can begin to recuperate.
What does an unhealthy rubber plant look like?
One of the best aspects of social media is crowd sourcing; when I was writing this essay, I thought to myself, “Wouldn’t it be cool if we could see real-life cases where Rubber Plants are struggling and diagnose what’s going on so that everyone can benefit from it?” So I made a post on Instagram and got the most amazing photos! Shane, my bestie and resident plant expert, is here to explain what’s going on and how to cure it!
Leaves are turning yellow and falling off
If the leaves of a plant are lower, it’s because the plant is devoting all of its energy to new, greater development. Because they’re concealed beneath the larger leaves, they don’t get as much light, and because they were the first leaves to sprout, they’ll be the first to die off as the plant expands. Don’t be concerned if a few leaves die if the remainder of the plant appears to be healthy and fresh growth is visible (as it is on this one).
Your Rubber Plant is drowning if the leaves are higher on the plant or new growth is larger. Reduce the amount of watering and let the plant to breathe. You won’t be able to save the yellowed leaves, but you will be able to keep it happy in the future!
Lower Leaves Are Dropping
Don’t panic if your Rubber Plant is dropping lower leaves, especially if it’s new to your home. This is your rubber plant acclimating to its new surroundings. Make sure there’s enough light, and everything should come to a halt. If they aren’t, seek for additional clues that something isn’t right!
Leaves are Droopy
This little guy’s problem is that he doesn’t get enough sun! Even if the window did cast a lot of natural light, he’s in the corner, away from where it would most likely shine. It’s also possible that it’s been overwatered. When the plant is deprived of light, it goes into slumber and absorbs water more slowly.
Solution: Relocate this plant to a location where it won’t be deprived of sunlight!
Leaves are Turning Brown and Dropping
This is a problem with the irrigation system. This reader takes a long time between waterings. When the leaves of a Rubber Plant get brown and crispy, it usually means it isn’t getting enough water. As a result, the leaves begin to dry out and fall off when the plant thinks that it must devote all of its energy to saving the living leaves. It’s also possible that it’s not getting enough light.
Solution: Make sure this plant is watered on a regular basis and that the soil is kept moist at all times.
Stalks are Very Thin and Long
Indoor rubber plants almost always require support; even my tall, vigorous one has a bamboo support for each shoot! But there’s a problem with this guy on two levels. Due to a lack of light, it is forced to shoot upward in order to find a source of light, which is why the stalks are so thin.
The second difficulty is that it does not receive sufficient water. Take a look at the way the leaves are curving back. This is a sign that it is thirsty! It could be related to the wooden planter in which it is housed. Your Rubber plant may be absorbing a large percentage of the water before the wood has an opportunity to absorb it! Consider replacing it with ceramic, plastic, or glass, which are less absorbent.
Toxicity
This plant is poisonous, and eating pieces of it can cause vomiting, nausea, and a loss of appetite. Large-scale consumption must be handled with swiftly; seek medical aid for more information. When handling the sap, wear gloves because it can cause dermatitis and skin allergies in susceptible people.
Remove rot root:
Carefully chop and remove all of the black and brown leaves. If your plant is in bad shape, you should also alter the soil. Clean the roots under running water as well.
All of these suggestions are for a rubber plant that is dying. Any of these remedies, however, will not work if your rubber plant has already died.
So the best approach to have a lovely rubber plant in your home is to take care of it from the start. How? To learn how to care for a rubber plant indoors, continue reading.
How often should a rubber plant be watered?
Ficus elastica is a tropical evergreen tree that can be found in southern China, Southeast Asia, and Indonesia. It is a member of the Moraceae family of plants, and its latex sap was used to create rubber until synthetics became accessible. Hevea brasiliensis, on the other hand, produces the majority of natural rubber. Although many plants contain significant levels of isoprene, the latexy sap of these two plants has enough to be used to create rubber.
F. elastica roots are used to build live bridges in tropical Northeastern India, in addition to being helpful for rubber! The F. elastica roots are led along a dead tree trunk that has been placed over a river. The roots grow to the other side of the trunk as it rots, thickening and training new roots to complete the bridge. Because it is flexible, the bridge can withstand strong winds and flooding. This tree is very stretchy in more ways than one! Rubber trees are ideal houseplants since they are low-light tolerant and assist to purify the air.
Moraceae is a plant family that includes shrubs, trees, and lianas that all leak a latexy sap when wounded. Foliar polymorphisms are found in members of this family, which means that their leaf forms vary depending on their life stage. Most other plants produce the same leaf forms throughout their lifetimes, thus this is a peculiar trait.
Can tolerate bright direct light and thrives in medium to bright indirect light.
Allow the soil to dry out between waterings. Water every 1-2 weeks. Increase the frequency as the light level rises.
Over time, this plant will grow to a maximum height of around 30′ (10m) with a spread of about 10″ (3.2m). As a houseplant, however, it will be much smaller.
It’s a plant that’s generally laid-back. Scale and mealybugs are possible. Scale bugs and mealybugs can be treated with weekly horticultural (Neem) oil sprays and regular wipe-downs of the plant as soon as they develop.
If eaten, this plant is poisonous to cats, dogs, and humans. Houseplants should always be kept out of reach of little children and dogs.
Can I save my rubber plant?
It’s time to resuscitate the rubber tree plant once you’ve determined it’s getting too much water. Stop watering the plant right away and let the soil dry up. Wait until the soil is dry to a depth of 1 inch before watering the plant again. Remove the plant from the pot and the soil if you fear root rot has set in. To remove the discolouration, cut back any brown or black roots using scissors. White and strong roots are ideal. Repot the plant in a fresh pot with new soil.
How can you tell if a rubber plant is overwatered?
Water the plant from below by soaking it in a tray for a couple of hours. It’s more uniform and less prone to overwatering in my experience.
When watering it, don’t soak it and make sure the water drains completely out of the pot. Please, no roots in the water! To do so, I hold my plant by the plastic pot and wiggle it, allowing extra water to flow through the drainage holes. After that, I keep the plant outside the decorative pot for a few hours before replacing it.
Rubber plants are a resilient species that tolerates dry soil well, thus they tend to be kept somewhat under-watered.
It’s a symptom of overwatering if the older leaves (typically the largest ones at the bottom) turn yellow or brown.
If the yellow/brown stains spread from the leaf’s interior section to the outside, it’s another indicator of overwatering.
If the plant is under-watered, all of the leaves, not just the lowest ones, will grow softer or droopy.
The tips will dry out first if the air is too dry, and the yellow/brown blotches will develop inwards.
Leaves are sturdy and firm, holding up well, and have a lovely waxy glow when the plant is well hydrated.
Should I cut brown leaves off rubber plant?
If you look after your Pink Rubber Tree, it will look after you! Here are some easy ways to keep your Pink Rubber Tree healthy over time.
Pruning Pink Rubber Trees
Remove any dry or dead leaves as needed throughout the year, but hold any substantial trimming for the spring and summer. Wear gloves and cover your floor with newspaper when pruning your Pink Rubber Tree; the sap that oozes out can be sticky and damage floors. Cut slightly above the node at a 90 degree angle with sharp, clean shears.
How do I get more leaves on my rubber plant?
Breaking apical dominance is the most typical approach to fix a rubber tree that won’t branch. In layman’s words, this entails eliminating the top growth on the main stem, which re-directs a hormone called auxin downward, encouraging branches to sprout further down the stem. When the plant is young, this is the perfect time to do it. Disturbing the leafy top canopy of older plants is bad for them.
When pruning a rubber tree for branching, do so from March to October when the plant is actively growing. The top cut is the most crucial. Remove as much of the stem and leaves as you want. The bits you remove can be rooted and used to grow new plants with patience.
Cut a leaf scar (a line where a leaf once grew) or a leaf node at 1/4 inch (6 mm). Sharp pruners can be used to nick or lightly slice the leaf scar to encourage the growth of a new leaf.