As with any plant, the right combination of water and light is critical when it comes to rubber plant care. You can regulate the quantity of light and water it receives, which is vital because neither should be excessive.
Light
A rubber tree houseplant requires bright light, but prefers indirect, cool light. Some individuals suggest placing it next to a window with sheer curtains. This allows for enough of light while avoiding excessive heat.
Water
Water balance is very important for the rubber tree plant. It should be maintained moist and watered at least once a week during the growing season. It’s also a good idea to spritz your rubber tree houseplant’s leaves with water or wipe them off with a damp cloth. If you overwater the rubber tree plant, the leaves will become yellow and brown and eventually fall off.
How do you take care of a rubber plant indoors?
Ficus elastica is a tropical evergreen tree that can be found in southern China, Southeast Asia, and Indonesia. It is a member of the Moraceae family of plants, and its latex sap was used to create rubber until synthetics became accessible. However, the bulk of rubber made organically originates from Hevea brasiliensis. Although many plants contain significant levels of isoprene, the latexy sap of these two plants has enough to be used to create rubber.
In addition to being helpful for rubber, in tropical Northeastern India, F. elastica roots are utilized to create live bridges! The F. elastica roots are guided along a dead tree trunk that has been placed across a river. The roots grow to the other side of the trunk as it rots, thickening and training new roots to complete the bridge. The bridge resists wind and flooding effectively since it is flexible. This tree is very stretchy in more ways than one! Rubber trees are excellent houseplants because they are low-light tolerant and help to purify the air.
Moraceae is a plant family that includes shrubs, trees, and lianas that all bleed a latexy sap when wounded. Foliar polymorphisms are found in members of this family, which means that their leaf forms vary depending on their life stage. This is a somewhat unique trait, as most other plants make the same leaf forms throughout their lifetimes.
Can tolerate bright direct light and thrives in medium to bright indirect light.
Allow the soil to dry out between waterings. Water every 1-2 weeks. Increase frequency with increased light.
Over time, this plant will grow to a maximum height of around 30′ (10m) with a spread of about 10″ (3.2m). As a houseplant, however, it will be much smaller.
It’s a plant that’s generally laid-back. Scale and mealybugs are possible. Scale bugs and mealybugs can be treated with weekly horticultural (Neem) oil sprays and regular wipe-downs of the plant as soon as they develop.
If eaten, this plant is poisonous to cats, dogs, and humans. Houseplants should always be kept out of reach of little children and dogs.
How do you encourage the growth of a rubber plant?
Freshening the soil with a composted mixture, watering and feeding, and providing sufficient light are all other strategies to encourage rubber tree branching, or to employ in conjunction with the cuts. Upgrade Soil: If your rubber tree is enormous, you may not want to take it out of the pot entirely.
Do rubber plants need a lot of light?
The Rubber Plant prefers bright, indirect light, however they are exceptionally tolerant of lower light areas for a ficus. Rubber trees can tolerate lower light levels, but without enough light, their huge, rich burgundy leaves will fade to a lighter green color.
Where should I put a rubber plant indoors?
Bright, indirect sunshine is ideal for rubber plants. They should get morning light from an east-facing window if possible. Place your plant near a window where the light is filtered by a sheer drape or curtain.
Because the leaves of your rubber plant might burn if exposed to direct sunlight, keep it out of direct sunlight. They can also adapt to low-light environments and thrive in workplaces and other dimly lit environments. It’s a good sign that your rubber plant needs additional light if the leaves are becoming paler or the bottom leaves are dropping off.
How can I get it to branch out from only one stalk?
To get a plant that branches out, you have two possibilities. To begin, you can simply buy it that way (instant gratification). Alternatively, if you have a single stalked rubber plant, cut the top off just above one of the leaves.
At the very least, you should see a couple of fresh stems sprouting soon.
If you have a woody rubber plant, you should consider air layering it.
You may propagate your plant at the same time this manner!
Finally, there’s a technique known as notching, in which you don’t actually cut anything off the plant.
Simply making selective partial cuts on a branch just above a node might cause side branches to emerge.
Why is my rubber plant not growing?
In the vast majority of cases, the answer is simple: light. If your rubber plant isn’t already in front of a window, I urge you to do so immediately and wait. Patience is required.
It spends the majority of its time in a dark area.
When it comes to plant growth, there are no shortcuts.
The most vital component is light, and your rubber plant will not live and grow effectively if it is placed in a dark area of your home.
Why do my leaves fall off, still green, until the entire branch is defoliated?
There could be a number of reasons for this. One possibility is a rapid drop in light. Have you recently purchased your plant from a nursery and taken it home?
Rubber plants frequently show their displeasure by shedding some leaves until they become accustomed to their new surroundings.
However, because light is so important, your rubber plant must be placed directly in front of a window.
Why are the new leaves smaller than the older ones?
This indicates to me that the growing conditions were less favorable when your rubber plant produced smaller leaves. This is most likely due to a lack of light. Change the location of your plant to one that receives more light (you guessed it…in front of a window).
How do I keep my Ruby leaves pink?
If your Ficus elastica ‘Ruby’ leaves aren’t as pink as they should be, you’ll need to increase the amount of light. To get the greatest effects, place your Ruby directly in front of a window. This will bring out the best color in the leaves.
However, because variegated types are more vulnerable to direct sunlight than non-variegated varieties, too much direct sunlight can scorch the leaves.
I should point out that burning is usually caused by quickly raising the brightness.
Variegated rubber plants can withstand a lot of sun, and I’ve seen them thrive in direct sunlight.
As a result, whenever you move a plant into much brighter light/sun, take it slowly to avoid scorching.
In most circumstances, growing these plants indoors, Eastern exposure windows, or even Western or Southern windows, should suffice.
Outside, rubber plants thrive in full daylight, so there’s no reason you can’t offer your plant as much sun as it needs indoors, where the light intensity is much lower.
Why are some of my leaves folding like a taco?
It’s most likely a problem with irrigation. Take a look at the plant in the picture below. This was a buddy who inquired about my situation. She was measuring moisture in her plant with a moisture meter and hadn’t watered it in months. Months!
The moisture meter said she was fine, but the soil remained bone dry for a long time after a few months, and the ensuing leaves were crumpled, folded, and taco-like.
Why do my leaves get discolored, then turned yellowish, and then turn brown and fall off?
Improper irrigation is usually the cause of this. Either the soil has been left too dry for an extended period of time (“underwatering”) or it has been kept too moist for an extended period of time (“overwatering”).
Check the soil with your fingertips as soon as you spot yellow leaves, and lift the pot if possible to check the weight.
Is the soil fully dry, and has it been dry for an extended period of time?
Is the pot light in weight?
Is it dripping wet, and has it been that way for some time? Yellowing leaves can be caused by either of these causes.
When it comes to watering, you must establish a balance.
Reread the section on watering previously in this blog post and make an effort to follow all of the other cultural practices, such as light, fertilizing, and so on.
It’s also possible that your rubber plant is badly pot confined and requires repotting into a larger container.
Before you repot any houseplant, make sure you read these important repotting tips.
Why are there brown spots on the leaves?
It’s possible that a bacterial or fungal infection is at blame. Bacterial infections usually have a yellowish halo surrounding the brown area, whereas fungal infections usually don’t.
Plants can become infected if they are kept excessively damp, especially in places with little light and poor air circulation.
Why do my leaves have tiny white spots?
There’s no need to be concerned if you notice little white specks on the outside edge of your rubber plant leaves.
These little white specks are called lithocysts.
Lithocysts are swollen cells in rubber plants that contain calcium carbonate crystals.
I’m not sure what they’re there for, but it’s perfectly natural!
Why are my leaves curling up and drooping?
This is almost certainly due to a lack of water. The leaves can droop and curl if the soil is kept too dry or too damp.
Feel the soil of your plant as soon as you detect your leaves curling and/or drooping.
Is it extremely dry?
Is it raining?
This will inform you of the situation.
If you have neglected your plant and it has become too dry, you must water it more frequently.
There could be a variety of reasons for your soil remaining moist for an extended period of time:
- Your plant will stay wet for longer if it is in low light. Place your plant near a window.
- Has your plant been resting in a saucer full of water for a long time?
- Rubber plants could be in serious trouble as a result of this.
- Excess water should always be discarded.
- Is your plant in a pot that doesn’t have a drainage hole?
- This is a complete no-no.
- Transplant your rubber plant into a pot with a drainage hole as soon as possible.
- Ficus are quite sensitive to being submerged in water.
- Maybe everything else is in order, but your plant is in a cool/cold environment.
- It should be moved to a warmer place.
- These plants despise chilly temperatures and are irritated by drafts.
Lower humidity might also contribute to curling. I wouldn’t be concerned if the curling is little and the plant appears to be healthy otherwise.
Many parts of the world experience harsh winters, but you may make your home more humid by using a humidifier. Although proper watering is considerably more vital, increasing humidity is also beneficial to your plants.
Why are the new leaves deformed?
This can be caused by a multitude of factors, including pests, nutrient deficiencies, and inconsistent and/or incorrect maintenance, as with many other aspects of houseplant care. All of these stresses on the plant can result in distorted leaves.
Check for pests on your plant.
Is there anything crawling or flying in the area? If everything appears to be in order, consider your care. Have you been neglecting your houseplant? Maybe let it dry out for a long time while the new leaves sprouted? Perhaps it’s also in a dimly lit area?
Deformed young leaves can develop from inconsistent care.
Your plant will reward you and new growth will seem normal again if you resume constant watering, light levels, and so on.
Nutrient deficiencies are less prevalent, but if you use a good, complete fertilizer like Dyna-Gro Grow (available on Amazon), you shouldn’t have any problems.
And, nonetheless, you should fertilize!
Why are there brown edges on the variegated rubber plants like tineke and ruby?
This can be caused by inconsistency in watering or sun scorch from not adequately acclimating your plant to brighter light. Rubber plants with variegated leaves can withstand a lot of direct sunlight. If your plant has previously been in a darker location, gradually adapt it to any direct sunlight to avoid any problems.
If your plant is growing in extremely warm or hot settings and is exposed to direct sunlight without acclimating, the leaves may be scorched.
Variegated plants are particularly vulnerable.
Brown spots on your variegated leaves are usually caused by insufficient watering or general soil moisture extremes.
This can be caused by both “underwatering” and “overwatering.”
As soon as the top one or two inches of the pot (depending on the size of the pot) are dry, give your plant a good watering.
Remove any surplus water.
How can I get hard water stains to come off the leaves?
Those obstinate hard water stains on your rubber plant leaves can be safely and quickly removed. 1 teaspoon white vinegar in a gallon of warm water is all it takes.
Wipe the leaves with hard water stains gently.
The vinegar aids in the dissolution of those pesky mineral deposits left by hard tap water.
Why did my rubber plant drop leaves when I first brought it home?
When you first bring a plant home, it’s common for it to drop leaves in a spectacular manner. The plant may be shocked by the change from a bright, humid greenhouse to normal indoor settings.
To make the transition a little easier, set your plant directly in front of a window (at all times, but especially when you first bring a plant home).
Why is my plant staying bushy but not growing tall?
If your rubber plant remains bushy and does not appear to be expanding, it most likely requires additional light. Give your plant some time if you’ve just transferred it into brighter settings. Watering, lighting, and fertilizing properly will eventually bring you there, but be patient.
Do you want to buy a unique Rubber Plant? Etsy is one of my favorite and most convenient one-stop-shops for buying almost any plant. Today, have a look at the Rubber Plant collection (link to Etsy)!
Rubber plants, as you’ve discovered, can cause a slew of issues.
They are, however, simple to grow if you follow my cultural norms for light, hydration, and soil.
It’s one of my simplest and least finicky plants.
What do you feed a rubber plant?
Your rubber plants will be ready for a nutritious food once a month has elapsed since planting. Give them what they want by feeding Miracle-Gro Indoor Plant Food once a week while they’re actively developing, an instant source of just the correct nourishment. Use 2 pumps for small pots and 5 pumps for larger pots to apply it directly to the soil and water as usual (over 6 inches in diameter). Always follow the manufacturer’s instructions before using any product.
Why are the bottom leaves falling off my rubber plant?
Lower leaves may drop due to both overwatering and underwatering. Because the fleshy leaves of the rubber tree are similar to succulent leaves that store water, too much water will cause the leaves to become spongy and fall off. Overwatering can cause edema and mortality in tropical plants, whereas underwatering dehydrates them. To stimulate the usage of reserves, rubber plants might be let to dry out a little before being watered. Another typical blunder is placing plants near floor vents that create a draft of hot or cold air in the winter or summer. Warm temperatures (75 to 80 degrees Fahrenheit during the day and 60 to 65 degrees Fahrenheit at night) and no drafts are ideal for rubber plants.
How do you make a rubber plant bushy?
Take a step back and take a look at your rubber plant. Consider its location and current growth when deciding how you want it to look.
If your rubber plant is on a table or shelf where there isn’t much room for it to develop, it’s usually best kept as a short, circular shrub.
Pruning lateral branches will encourage new growth to fill in the plant’s centre portion, so pick a size you can work with and then let it fill in on its own.
Step 2: Remove any branches which seem out of place.
Begin by clipping back any lower branches that appear to be growing straight out horizontally or that are interfering with the plant’s ideal shape.
Some branches will grow in unusual directions, twisted, or at a significantly faster rate than others. To keep the plant looking tidy and appealing, remove these.
To keep the plant from looking overly dense, trim some branches and leaves from the middle section, but this is a matter of personal opinion.
Step 3: Cut to your desired height.
Trim the top set of leaves before the node after your rubber plant has reached the appropriate height. By cutting before the node rather than after it, you’re essentially leaving a stump. The plant will no longer be able to send out any more vertical chutes as a result of this.
Trim the top of the rubber plant when it reaches a maximum height of four feet for a more compact shrub-like shape. Instead of growing tall and narrow, this will encourage the plant to grow more horizontally and produce a more rounded form.
Step 4: Encourage leaf coverage by pruning often.
As previously said, caring for a rubber plant as a bushy shrub needs a little more effort than caring for it as a larger tree-like houseplant. Pruning is required to maintain a bushy rubber plant.
When a cut is made after a node, one or two additional branches will begin to grow from the location where the cut was made. Cut them back as well after the plant has recovered from the previous pruning and sent out some new chutes.
You may manage how thick and bushy the plant develops by trimming the new lateral growth on a regular basis.
Step 5: Propagate new cuttings back into the pot.
Propagating rubber plant cuttings is simple and straightforward. You can produce a more shrub-like appearance by inserting these cuttings back into the pot of your rubber plant, which will assist to fill in the bottom areas of the plant.
After pruning, cut branches can be directly transplanted back into the same pot as the original plant, or they can be rooted first in a glass of water.
Will rubber plant leaves grow back?
Rubber plants that lose their leaves might become leggy, which means they have no leaves on the lowest half of the plant. Rubber plants only sprout leaves at the top of their stalks, not at the bottom. As a result, there is no way to make a plant leaner.
Replant lesser stalks in the planter with the larger ones to make your Rubber Plant appear fuller. This will make the plant look bushier by filling in the lowest naked space.
Does rubber plant need water?
Ficus is a wide genus of tropical and semi-tropical plants, many of which are suitable for indoor use. The rubber plant grows into a beautiful home-sized tree and may be grown indoors.
Rubber plants need water that is regularly moist but never waterlogged. Root rot, soil gnats, and other issues can occur when plants are kept wet. Dry soil causes leaves to fall off, reducing the plant’s overall health and growth. Rubber plant irrigation should be done correctly to promote attractive leaves and optimal growth.
Rubber plants grow in the rainforest. As a result, they have adapted to a lot of water. Excess or standing water, however, can be harmful to the health of most plants. So, how much water does a rubber tree require?
The first step is to make sure the plant’s container has enough drainage holes. Also, check to see if the potting media contains peat, vermiculite, or perlite. Peat increases porosity by retaining water and air. Vermiculite serves the same purpose, while calcined clay perlite improves the soil medium’s moisture and nutrient retention capacity.