Ficus elastica is a tropical evergreen tree that can be found in southern China, Southeast Asia, and Indonesia. It is a member of the Moraceae family of plants, and its latex sap was used to create rubber until synthetics became accessible. Hevea brasiliensis, on the other hand, produces the majority of natural rubber. Although many plants contain significant levels of isoprene, the latexy sap of these two plants has enough to be used to create rubber.
F. elastica roots are used to build live bridges in tropical Northeastern India, in addition to being helpful for rubber! The F. elastica roots are led along a dead tree trunk that has been placed over a river. The roots grow to the other side of the trunk as it rots, thickening and training new roots to complete the bridge. Because it is flexible, the bridge can withstand strong winds and flooding. This tree is very stretchy in more ways than one! Rubber trees are ideal houseplants since they are low-light tolerant and assist to purify the air.
Moraceae is a plant family that includes shrubs, trees, and lianas that all leak a latexy sap when wounded. Foliar polymorphisms are found in members of this family, which means that their leaf forms vary depending on their life stage. Most other plants produce the same leaf forms throughout their lifetimes, thus this is a peculiar trait.
Can tolerate bright direct light and thrives in medium to bright indirect light.
Allow the soil to dry out between waterings. Water every 1-2 weeks. Increase the frequency as the light level rises.
Over time, this plant will grow to a maximum height of around 30′ (10m) with a spread of about 10″ (3.2m). As a houseplant, however, it will be much smaller.
It’s a plant that’s generally laid-back. Scale and mealybugs are possible. Scale bugs and mealybugs can be treated with weekly horticultural (Neem) oil sprays and regular wipe-downs of the plant as soon as they develop.
If eaten, this plant is poisonous to cats, dogs, and humans. Houseplants should always be kept out of reach of little children and dogs.
Do rubber plants need direct sunlight?
The Rubber Tree (Ficus elastica), sometimes known as the Rubber Plant, is a low-maintenance ficus found in southern Asia. They may grow up to 200 feet tall in their natural habitat, and their buttressing roots have even been trained to grow over rivers in India to build living bridges.
Because the Ficus elastica prefers moist soil, avoid planting it near a drafty window or vent, a heater, or in full sunshine. The Rubber Plant prefers bright, indirect light, however they are exceptionally tolerant of lower light areas for a ficus. However, it is often recommended that the plant be placed near a southern facing window with sheer curtains to let the greater light to seep through.
If you’re unsure about the lighting in your home or business, we’ve put together a primer on how to measure light.
Where should I place my rubber plant?
Bright, indirect sunshine is ideal for rubber plants. They should get morning light from an east-facing window if possible. Place your plant near a window where the light is filtered by a sheer drape or curtain.
Because the leaves of your rubber plant might burn if exposed to direct sunlight, keep it out of direct sunlight. They can also adapt to low-light environments and thrive in workplaces and other dimly lit environments. It’s a good sign that your rubber plant needs additional light if the leaves are becoming paler or the bottom leaves are dropping off.
How do I keep my rubber plant happy?
Balance is the key to rubber plant care. It need exactly the proper amount of sunlight and water to thrive. You’ll have a happy, strong, and tall rubber tree if you can give it just the perfect quantity of both. If your rubber plant starts to drop its lower leaves, it’s a sign that it needs more sunlight or water. Continue reading to learn about the best conditions and ways to care for your rubber plant.
Bright, indirect light that isn’t too hot is preferred by rubber plants. Leaves that are exposed to direct sunlight may become burned. To give your rubber plant exactly the proper amount of sunlight, place it near a window with a sheer curtain. More variegated types require more light to help bring out their colors, so make sure they get plenty of it.
Water: During their summer growing season, these plants require extra water. It’s important to keep the soil moist but not soggy. To keep the leaves moist and to assist your plant receive more sunshine, wipe them down with a damp towel. If you don’t want to wipe clean every leaf, misting is another alternative. To avoid root rot, keep your rubber plant in well-draining soil at all times.
You want to keep the soil dry but not too dry during their dormant season in the winter. Allow the top few inches of soil to dry between waterings to avoid overwatering. If your rubber plant’s leaves begin to droop, it’s alerting you it needs more water.
Temperatures: Rubber plants prefer temperatures ranging from 60 to 75 degrees Fahrenheit. They can withstand temperatures as low as 50°F in the winter. A healthy temperature balance is ideal for this plant’s growth, just as it is for water and sunlight. Because of its tropical origins, it favors wet and humid air, but it may thrive in less humid conditions. Rubber plants are sensitive to temperature variations and prefer to dwell in regions where the humidity and temperature remain constant.
Toxicity: The sap of a rubber plant might irritate some people’s skin. After touching your plant, make sure to fully wash your hands, especially if you come into contact with the sap. Depending on how much of this plant is taken, it might produce mild stomach problems or more serious symptoms including diarrhea or vomiting.
Mealy bugs, mites, scales, and aphids are just a few of the pests that might infest your rubber plant. These bugs can be removed with a warm soap and water solution or an insecticidal soap if detected early.
Problems: Because rubber plants want equilibrium in all forms, it’s easy to make them unhappy if you don’t pay attention to their needs. The easiest method to avoid this is to monitor the amount of light it receives, the moisture in its soil, and the ambient temperature of the space it is in.
Rubber plants are particularly vulnerable to plant diseases caused by excessive watering. To avoid drowning your plant, let the soil dry out between waterings, as we previously recommended.
If you need more advice on how to deal with any of these rubber plant issues, check out our guide to reviving a plant.
Repotting: To allow your rubber plant to grow, you should repot it. Depending on the size of your pot and how quickly your rubber plant develops, you may need to do this every few years or every year. If you want to retain your rubber plant at its current size, don’t repot it.
The simplest method of propagation is to take a short branch from a healthy rubber plant and root it in soil or water. Before planting, you should let the sap from the stem dry. Air layering is another method of propagation. To do so, cut a healthy plant open and insert a toothpick into the aperture. To keep it on the toothpick, wrap it in damp moss and then wrap it in plastic wrap. Cut the branch off and replant it in different soil once you detect roots forming in the moss.
Pruning: Pruning your rubber plant will help it support itself, promote new development, and keep its size under control so it doesn’t get too big. Pruning a rubber plant is ideally done in the spring to prevent the winter, although it can be done at any time of year. Cutting the branches will cause some of the plant’s sap to leak out.
Rubber plant maintenance is simple if you keep an eye on your plant and respect its demand for balance. If you want to amaze your guests with a tall houseplant, rubber plants are definitely worth the effort.
How do you encourage rubber plants to grow?
Freshening the soil with a composted mixture, watering and feeding, and providing sufficient light are all other strategies to encourage rubber tree branching, or to employ in conjunction with the cuts. Upgrade Soil: If your rubber tree is enormous, you may not want to take it out of the pot entirely.
Should I cut brown leaves off rubber plant?
If you look after your Pink Rubber Tree, it will look after you! Here are some easy ways to keep your Pink Rubber Tree healthy over time.
Pruning Pink Rubber Trees
Remove any dry or dead leaves as needed throughout the year, but hold any substantial trimming for the spring and summer. Wear gloves and cover your floor with newspaper when pruning your Pink Rubber Tree; the sap that oozes out can be sticky and damage floors. Cut slightly above the node at a 90 degree angle with sharp, clean shears.
How do I make my rubber plant bushy?
Take a step back and take a look at your rubber plant. Consider its location and current growth when deciding how you want it to look.
If your rubber plant is on a table or shelf where there isn’t much room for it to develop, it’s usually best kept as a short, circular shrub.
Pruning lateral branches will encourage new growth to fill in the plant’s centre portion, so pick a size you can work with and then let it fill in on its own.
Step 2: Remove any branches which seem out of place.
Begin by clipping back any lower branches that appear to be growing straight out horizontally or that are interfering with the plant’s ideal shape.
Some branches will grow in unusual directions, twisted, or at a significantly faster rate than others. To keep the plant looking tidy and appealing, remove these.
To keep the plant from looking overly dense, trim some branches and leaves from the middle section, but this is a matter of personal opinion.
Step 3: Cut to your desired height.
Trim the top set of leaves before the node after your rubber plant has reached the appropriate height. By cutting before the node rather than after it, you’re essentially leaving a stump. The plant will no longer be able to send out any more vertical chutes as a result of this.
Trim the top of the rubber plant when it reaches a maximum height of four feet for a more compact shrub-like shape. Instead of growing tall and narrow, this will encourage the plant to grow more horizontally and produce a more rounded form.
Step 4: Encourage leaf coverage by pruning often.
As previously said, caring for a rubber plant as a bushy shrub needs a little more effort than caring for it as a larger tree-like houseplant. Pruning is required to maintain a bushy rubber plant.
When a cut is made after a node, one or two additional branches will begin to grow from the location where the cut was made. Cut them back as well after the plant has recovered from the previous pruning and sent out some new chutes.
You may manage how thick and bushy the plant develops by trimming the new lateral growth on a regular basis.
Step 5: Propagate new cuttings back into the pot.
Propagating rubber plant cuttings is simple and straightforward. You can produce a more shrub-like appearance by inserting these cuttings back into the pot of your rubber plant, which will assist to fill in the bottom areas of the plant.
After pruning, cut branches can be directly transplanted back into the same pot as the original plant, or they can be rooted first in a glass of water.
Why is my rubber plant dying?
Rubber plants are recognized for being one of the easiest houseplants to care for because they are less sensitive to their surroundings than other houseplants. This isn’t to suggest that your Rubber Plant won’t struggle from time to time if its environment isn’t right for it, so keep an eye out for warning signs and treat them as soon as possible to keep your rubber plant alive.
Changes in light conditions, over- or under-watering, dry air, and pests are the most common causes of rubber plant death.
Can rubber plant be kept in bedroom?
Rubber plants are low-maintenance, hardy, and thrive inside. It’s a terrific complement to your bedroom with its beautiful foliage. According to NASA, it filters the air, yet it is harmful.
When should I repot my rubber plant?
Rubber plants have been photographed in pots that are far too small. They are sometimes so top-heavy that they are on the verge of falling over. It’s definitely time to repot if this happens!
On the other side, there are several little rubber plants put in too huge pots.
If your plant is in a container that is too big for it, the soil will stay wet for too long after you water it. This could cause root rot, which could be the end for your rubber plant.
When to repot your rubber plant
When your rubber plant’s roots have completely filled the pot, it’s time to repot it. Or when the roots begin to grow through the drainage holes in the pot’s bottom.
Use a well-draining potting soil to avoid root rot. Mix in additional perlite, sand, or vermiculite to make it even better. Always check for drainage holes in your new planter pot.
Instead of using a plastic pot, use a terra cotta one. Moisture can evaporate because the clay is permeable. All of the moisture will be trapped inside the plastic.
The plant’s active growing season begins in the spring. It will be brimming with vigor and in the greatest possible shape to withstand the stress of being repotted.