Why Is My Palm Plant Dying

Lots of direct, bright light is preferred by indoor palms. If your location doesn’t have enough light, go with the more adaptive varieties because inadequate lighting is a major contributor to stress. Remember that even animals that can endure lower light levels typically value more.

The brilliance of the sun, however, rapidly decreases with distance. While a skylight over a tall plant can be fantastic, it is insufficient for shorter plants that are much farther away. Over the winter, be aware of the changing seasons and dimming conditions; if necessary, add a grow light.

How is a dead palm revived?

  • The Appropriate Amount Of Water
  • Use only top-notch fertilizer.
  • Hold fertilizer 2 feet away from the roots.
  • Use top-notch soil
  • Cut the Fronds Only When They Are Dead
  • Avoid pruning during monsoon season.
  • Planting Palms at the Correct Depth
  • Check To See If It Has The Proper Nutrients
  • Enhance or limit sunlight

There are certain things you can do to revive your palm tree if you believe it to be dead. The best technique to revive a dying palm tree is to properly water, prune, and fertilize it. To properly care for your dying palm tree, follow the instructions listed below.

ADD THE RIGHT AMOUNT OF WATER

If you overwater your palm tree, the fronds will start to turn brown or yellow and break off before they die. Additionally, if you don’t give your palm tree enough water, the leaves will start to dry out and become brown. You can minimize overwatering by adding 30 percent sand to the soil, and you can prevent underwatering by utilizing a soil moisture meter.

TIP

Less watering in the winter and more in the summer should be given to palm trees (Summer is when your palm tree will grow the most)

USE HIGH-QUALITY FERTILIZER

Your palm tree will be more vulnerable to diseases if it doesn’t get adequate nutrition. Giving the palm tree the nutrition it need will ensure that it grows and develops healthily. Avoid using cheap fertilizer products because they are ineffective.

Tip

Purchase a premium slow-release fertilizer to prevent the nutrients from getting washed away by rain or irrigation.

KEEP FERTILIZER 2 FT AWAY FROM ROOTS

You risk actually burning the roots if you apply fertilizer too closely to the roots. Always keep fertilizer at least 2 feet away from tree roots to prevent the tree from developing an insect, fungal, or disease susceptibility. The copper fungicide provides excellent defense against germs and fungus.

USE HIGH-QUALITY SOIL

Only new palm tree owners need complete this step. The proper moisture and soil drainage that a new palm tree requires to grow happily and healthily should be provided by the right soil. As we indicated before, fertilizer can burn roots, so never mix it with dirt.

ONLY CUT FRONDS AFTER THEY ARE COMPLETELY DEAD

After spotting the tips of palm tree leaves becoming brown, do not immediately chop them. Nutrients will be lost if the leaves are cut too soon. Early pruning will stop new growth. Cut brown palm tree leaves only when they have turned totally brown or are dead.

DON’T PRUNE DURING HURRICANE SEASON

Some arborists advise pruning palm palms to remove excess weight before a storm or monsoon season. This is untrue, and trimming your palm tree’s fronds might even make it more stressed. In reality, the fronds shield the plant from the wind.

PLANT PALMS TREES AT THE RIGHT LEVEL

This process is used to plant a new palm tree or to remove an old one. It is important to only plant a new palm tree deep enough to cover the root ball of the tree when doing so (the circular ball of roots at the bottom of the tree). Mexican Fan Palm trees, however, are capable of being buried 4-5 feet deeper than the root ball. For landscapers who wish to match tree heights, this is a huge advantage.

MAKE SURE IT HAS THE RIGHT NUTRIENTS

Check the potassium, calcium, magnesium, and iron levels in your palm trees. A palm tree can become deficient and encounter a wide range of issues without these nutrients. In the case of a potassium shortage, leaves will develop spots. In case of calcium insufficiency, leaves would look stunted and distorted. The border of the fronds on the leaves will have yellow bands if there is a magnesium shortage. Additionally, leaves with a lack of iron will have broken ends, green spots, and thin green veins.

INCREASE OR RESTRICT SUNLIGHT

If left in the sun, young palm plants can get burnt. On the other side, the leaves will begin to turn brown when there is insufficient sunlight. But if your palm tree has been living in the shade for a while, it has probably grown accustomed to that level of light.

Do I need to remove the brown palm leaves?

Both too much and not enough water will harm palm trees and cause leaf browning and yellowing.

The majority of palms prefer to have 50% of their soil dry before being irrigated. Always be sure the soil needs water before applying it. Wash the saucer thoroughly, then drain any extra water. Overwatering can cause yellowing and eventually root damage.

When the leaf tips dry out and turn brown, this is a typical issue known as “tipping.” The most frequent culprit is tap water, which has salts, chlorine, fluoride, and other potentially dangerous substances in excess. Use distilled water or rainfall to avoid this.

If you start to see salt buildup as a white crust-like coating on the soil’s surface, you can flush the soil a few times a year. To accomplish this, remove the top layer of dirt and water your palm slowly but liberally with a volume of water that is roughly four times that of your pot. Before repositioning your Palm, allow the water in the pot to completely drain and remove any extra water from the saucer.

Nutrients in the potting soil are replenished by fertilizer, but too much fertilizer can cause leaf tips to become brown and compromise plant health. Only fertilize palm trees in the spring and summer when they are actively growing. Palms that are dormant don’t require more fertilizer. Use palm tree fertilizer at the rate suggested on the box. Keep in mind that more fertilizer is not always better. Never fertilize dry soil because doing so can cause the roots to burn.

Warm temperatures are necessary for palms to thrive. Despite being often kept warm, indoor plants are nonetheless susceptible to cold harm. Plants should be kept away from windows and doors that draft because the cold air can brown the tips of the leaves. In the winter, keep plants away from windows because leaves contacting the glass might freeze and become brown. Avoid placing items directly in an air conditioning vent during the heat.

Throughout the growing season, palms grow new leaves. A palm tree leaf gets dark as it nears the end of its natural life, starting at the tip and continuing until the leaf is entirely brown and falls off. The brown tips are normal and not cause for alarm if only one or two leaves are browning and new foliage is still coming in.

The right way to remove any brown tips from your plant is as follows:

  • Amass your resources. Paper towel, some rubbing alcohol, and a pair of well-kept scissors or pruning shears are all required. (The alcohol wipes included in first-aid kits are excellent!)
  • Before starting and after each cut, wipe the sharp scissors or pruning shears’ blades with rubbing alcohol. The blades should be wetted with water before cutting if you are simply removing brown, crispy leaves that have become that way due to aging, a lack of moisture, or sunburn patches. This will help to avoid damaging vital tissue.
  • At the base, close to the stem, or at the soil, remove any leaves that are completely brown or yellow. Make sure not to tug on the leaves as this could harm the plant’s vital components. Remove only the afflicted section of the leaf if only a portion of it is brown or yellow.

Important: When pruning, take care not to take more than 30% of the entire plant. To avoid removing an excessive amount of leaves at once, you might need to prune in phases.

How frequently do palm trees need to be watered?

If you want to give your home a lush, tropical appearance, one of the most popular indoor plants is the palm tree, or Arecaceae. Aside from its lovely appearance, which can go well with any design, it can grow in dimly lit areas, requires little care, and is hard to kill. The only drawback of this plant, I suppose, is that some of its varieties can be rather expensive. If you decide to purchase one, you should try your hardest to maintain it.

Fun fact: Because of the palm tree’s adaptability to indoor settings, it has been a common houseplant since the Victorian era.

The Madagascar-born Areca palm, commonly referred to as bamboo plants, is one of the greatest indoor palm tree varieties. It enjoys a warm climate and can reach heights of 6 to 8 feet. There are currently over 2,600 different species of palm trees, each of which has unique maintenance needs. However, indoor palm trees typically enjoy strong, indirect light, a humid climate, and up to once or twice a week of watering.

Indoor Palm Plant Care Tips

You must conduct thorough research because each type of indoor palm tree necessitates a distinct type of care in order to keep it alive and healthy. Some plants favor the shadow and a darker, more humid climate. Fertilizer may be required for some plants. Additionally, it’s preferable to put your indoor palm tree in a location where there won’t be a lot of traffic that will rub against or pull on the fronds and damage the plant. Remember that trimming the top of a palm tree will cause it to die.

Here is everything else you need to know about caring for your indoor palm tree, from the amount of sunshine it needs to typical issues and how to fix them.

Sunlight

Place your indoor palm tree in a location where it can get bright, indirect light as the first step in caring for it. It can, however, survive dim lighting, particularly in the winter. Avoid placing your indoor palm tree in the sun since too much direct light may cause your plant to die.

The leaves of your indoor palm tree are turning yellow, which is a sign that it isn’t getting enough light, a common problem.

Yes, your indoor palm tree can survive in lower light levels, but if the environment is too gloomy, it will stop growing and its leaves will start to turn yellow because there isn’t enough light to sustain photosynthesis. The optimal location for it is somewhere that can receive medium to bright, indirect light.

Water

Watering your indoor palm tree when the top 1-2 inches of the soil are fully dry is the next item on our list of ways to take care of it. Typically, this occurs two to three times per week. Additionally, remember that your indoor palm tree needs proper drainage. Never allow the root ball of your plant to sit in water as this could result in its demise.

The leaves on your indoor palm tree are becoming brown or yellow, which indicates irregular watering or tap water that hasn’t been filtered.

Solution: Your indoor palm tree may become stressed from irregular watering, especially if the soil is too dry. It’s ideal if you can plan out when to water your plants. Make sure the earth feels dry as well. If so, water your plant appropriately.

Your water’s quality could be another contributing factor. Because tap water contains salts, chlorine, minerals, and fluoride, the tips of the leaves burn, curl, and turn brown, making it unsuitable for use with plants. Use a water filtration device or overnight storage in an open container to filter the water.

Humidity & Temperature

Placing your indoor palm tree in an area with typical room temperatures between 60 and 80 degrees Fahrenheit is another tip we have for caring for them. Although your indoor palm tree may survive remarkably well in conditions of ordinary humidity, it is advised to water it frequently, set it close to a humidifier, or use a pebble tray to keep insects away.

Common Issue: If the leaves on your indoor palm tree are turning yellow, the soil around the plant is completely dry, and the humidity level is low.

Purchase a humidifier if at all possible for your plant. The experts concur that this is the finest option. A few times a week of routine misting will also work. To keep your indoor palm tree happy and healthy, stay away from cold drafts, air conditioning vents, doors, and abrupt temperature fluctuations.

Food

Feeding your indoor palm tree with a water-soluble fertilizer on a regular basis during the growing season is another tip we have for you. Additionally, since palm plants are prone to potassium deficiencies, give your plant extra potassium and manganese. If the fronds of your plant are turning brown or yellow, that is the biggest indication that it has this illness.

Common Issue: Excessive fertilization may be to blame for the leaves becoming brown.

Solution: Applying too much fertilizer to your indoor palm tree will cause fertilizer burn, also known as plant burn. Salts used in fertilizer wick moisture away from plants. Keep in mind that anything in excess is unhealthy for your plant. It’s best to apply fertilizer according to the suggested time and amount to prevent plant burn.

Pests & Other Problems

Mealybugs, scale insects, and spider mites are just a few of the typical pests that might harm your indoor palm tree. Make use of an insecticidal soap to get rid of these pests.

Expand your knowledge of plants. For additional information on various houseplants and advice on how to keep your plants alive and healthy, visit our blog on plant care.