Should You Defoliate Outdoor Plants

Your plants become stressed when healthy foliage is removed. Therefore, you should only defoliate fully healthy plants. Strong, straight stems, green leaves, rapid growth, and a well-draining, fast-drying medium are all indicators that your plants are content.

Avoid defoliating any plants that appear emaciated or exhibit signs of nutritional deficiencies, excessive or inadequate watering, nutrient or light burn, wind damage, pests, or disease. Defoliating these plants will just put them under more strain that they won’t be able to handle.

Additionally, we only advise defoliating indoor plants. Cannabis plants, as we previously said, actually store energy in their leaves for times when they are under duress. We don’t advise defoliating outdoor plants since they are more susceptible to pests and more frequent environmental stressors (such storms, severe winds, droughts, and changes in temperature and humidity).

The sun also changes positions throughout the day and can penetrate even very bushy plants, so outdoor plants receive far more (and better) light exposure than their counterparts under indoor grow lights. Defoliation does not help them in the same way as it does indoor plants.

Do I need to remove the fan leaves off my outside plants?

The good news is that the average grower can use several more conservative pruning techniques without running the significant danger associated with schwazzing.

For instance, you can prune your plants in the early stages of growth as they begin to grow bushy. When deciding whether to remove fan leaves during veg, keep these things in mind:

  • You can prune the leaves near the bottom of the plant that get little light.
  • In order to maximize light penetration throughout the canopy as opposed to only the tops, fan leaves that cast shadows over budding sites should be clipped.
  • Remove any fan leaves that are turning inward toward the plant.
  • In order for the plant to concentrate on the bud sites near the top, lower-lying bud sites may be eliminated.
  • Pruning should be done on any dead or dying leaves.

Similar to how you do it during veg, you can remove fan leaves during flowering. Remove any huge leaves or dead or dying fan leaves that are blocking bud sites.

You should prune in intervals, leaving at least a few weeks between each session, is one thing to keep in mind. Daily pruning can leave your plants in a constant state of shock that might prevent rather than promote growth. You’ll often see a growth spurt in the weeks after pruning.

Should I cut the fan leaves while they are blooming outside?

It’s rewarding to grow and gather the beautiful fruits and flowers that nature has provided for us. Whether you are a plant hobbyist or considering larger-scale gardening, it is always a good idea to ask questions. Do you have any doubts about removing the fan leaves from your plants when they are in bloom, for instance?

Yes, you need use the proper method to remove fan leaves during the flowering period. Fan leaves can be removed to let in more light and improve airflow to the lower canopy. Additionally, it will make sure that more energy may be directed onto your plant’s useful components, leading to a larger crop.

During the flowering stage, your plant goes through a tremendous growth surge, and any severe pruning at this time may cause your plant to go into shock. Any time the fan leaves are taken away, development will momentarily slow down. However, if nutrients are left in the substrate, growth can suddenly accelerate.

However, throughout the first to last flowering time, it is still crucial and highly beneficial to remove the fan leaves correctly. Fan leaf removal is a method of pruning, just like any other. However, if done properly, it will really benefit your plant.

One of the most well-liked and simplest methods to increase your yield is to trim the fan leaves. To maintain their plants tidy and healthy, many gardeners prune their plants to some extent. Others find it preferable to remove the fan leaves from plants since they can occasionally get out of control and become difficult to maintain.

Depending on the type of plant, proper pruning will remove 20–40% of the mid to upper foliage every 5-7 days when clipping the fan leaves. Maintaining healthy leaves at the base of the canopy will prevent precious light from being lost or wasted.

A flowering plant will grow bigger and mature faster the more high-quality light it receives.

Removing your fan leaves during the flowering stage has several advantages for all plant types, and there are very few risks involved. Trimming ultimately assists in keeping your plant’s size minimal while also maximizing its output and output quality.

This is particularly crucial if your gardening area is small and you have a modest selection of plants. In other words, you can get the most yield from fewer plants by eliminating the fan leaves from your plants.

Trimming your fan leaves simply entails cutting or trimming the larger leaves from the selected plant’s portions. One may compare trimming fan leaves to grooming a plant. Every plant goes through its life cycle with a certain number of leaves dying.

Simply remove the dead leaves at a much faster rate by pruning the fan leaves before they wither. Consequently, your plant won’t waste energy on the dead sections. Additionally, as leaves deteriorate gradually over an extended period of time, assisting your plants in getting rid of them allows them to focus their energy on other essential components.

If done correctly, you can increase the value of your expensive fruits and flowers! Despite all the advantages, newbies with little to no experience with their plants should never remove the fan leaves from their plants. It takes skill to trim the right number of fan leaves, so making a plan is crucial.

If you don’t prune the fan leaves properly, it could cause significant loss or harm to your plants, and if you don’t know how to prune, it might be best to avoid it altogether.

Starting small and being cautious are always wise while acquiring new skills or utilizing novel genetics. For instance, a plant will be under more stress if its fan leaves are pruned heavily. Some DNA can withstand significant stress without suffering too many drawbacks. Other genotypes might be more delicate, leading to stunting or self-pollination.

Some good news is here! First, the average grower can clip the fan leaves of their plants in a variety of more modest ways without taking any significant risks:

  • The plants’ lower leaves should be removed because they receive little light and will eventually wither away.
  • In order to enhance the percentage of light penetration throughout the canopy as opposed to only the tops of the plant, fan leaves that cast large shadows over budding or blossoming sides should be removed.
  • Fan leaves that are expanding toward the plant from the inside out should be cut off.
  • Lower-level bud and flowering sites may also be eliminated to allow the plant to concentrate on the sites towards the top.
  • Always cut away any dead or dying leaves as soon as possible.

Similar to when a plant is in the vegetative condition, it is crucial to remove fan leaves during flowering. One thing to keep in mind is that the fan leaves of a plant should always be removed in intervals, with at least a few weeks elapsed between each session.

A plant will be left in an unending state of shock if the fan leaves are cut every day. When your plant experiences shock, it could prevent growth rather than promote it. But after removing the fan leaves, if done correctly, you will see a surge of growth in the coming weeks.

You are touching each plant more frequently if you remove fan leaves more frequently. Use this time to look for any symptoms of illness, discolouration, or pests on your canopy and leaves.

It’s crucial to give your plant’s fan leaves some time to heal after trimming them during the flowering stage. As previously said, cutting fan leaves causes the plant a great deal of stress, so giving it time to recover is crucial.

For the first few days following pruning, make sure you give your plants enough water, light, and food to help them recover from the shock. However, a considerable number of new shoots and leaves ought to be visible after a week.

You can remove fan leaves once more after the recuperation period is finished and your plant is back to its regular growing period. Always keep in mind that too much leaf and sprout removal puts a lot of stress on the plant and can prevent it from growing and producing fruit.

It is important to remember that cutting fan leaves is not always necessary and that most seasoned growers rarely bother with it. Despite this, it is a well-known truth that pruning your plants in a reasonable and controlled manner has a significant positive impact on them.

Trimming your plants’ fan leaves while they are in the blossoming stage could be enjoyable and gratifying. A lot can be learned about the various plant species and how well they can handle stress.

Pruning should be extremely minimal and restricted during flowering. The removal of fan leaves that are shading healthy bud or flowering sites is one instance of proper pruning. During the vegetative cycles, the trimming of harmed, diseased, or dead plant tissue is also an option. By removing these leaves, you can prevent them from falling and getting absorbed into the soil.

Always trim carefully, and remember that trial and error is the only way to learn! But once you get the hang of it, pruning the fan leaves will ultimately result in a bigger and healthier-looking yield!

Should you give outside plants lollipops?

Although lollipopping is a straightforward procedure, you should still use caution. You should lollipop your plants right before they start to bloom. Additionally, we advise trimming to remove any extra branches, albeit you should move cautiously and with a strategy.

  • When pruning your plants, start with clean, sharp scissors. For example, our curved trimming scissors work well for making exact cuts close to the nodes. Invest on a pair of shears for larger, thicker branches. Remove any apparent foliage first. Obviously, the initial few branches around the base of your plant won’t receive enough light to properly develop. First, get rid of these.
  • We advise following Kyle Kushman’s pruning recommendations and cutting any branches that don’t break at least half as high as the plant after you’ve addressed the most visible issue areas. These branches won’t grow properly because of the plants’ stretching during the first weeks of blossoming. Although pruning is frequently employed in conjunction with lollipopping when appropriate, eliminating entire branches is not always essential.
  • Start cutting down branches that are growing in the centre of the plant next, especially those that are growing beneath the canopy. Not only will they probably not receive enough light, but this interior foliage also hides several potential locations for large buds. You should also remove any branches or leaves that are decaying or turning yellow at this time.
  • When you’re ready, start lollipopsing each branch on your plant individually. Nodes should only be left three nodes or less from the tip of each branch, according to some growers. But a lot relies on the strain, the size, and the state of each plant specifically. Additionally, the moment you’re pruning matters. For instance, if you’re cutting late and your plants are smaller, we advise clipping below the top 4–5 nodes. In any instance, cut off the growth that extends to each branch’s highest nodes.

We advise waiting 23 days after you’ve lollipopped each branch before turning on the lights for your plants. Additionally, keep in mind that excessive pruning can hinder their growth. If you’ve never tried lollipopping, start out slowly and progress to the best pruning technique.

Which week should flowers be defoliated?

At the conclusion of this week, you might also wish to start defoliating your plants. These plants bush out and produce an abundance of fan leaves along with their rapid vertical growth. Working with the foliage can be challenging due to its enormous volume.

To get the greatest results, these plants must be defoliated while they are in the flowering stage. The conclusion of Week 2 or Week 3 are the ideal times to begin. There are some rules to go by, but there is no absolute rule.

For optimal results, limit defoliation to Two Sessions during the flowering period

You can conduct a small amount of defoliation each week, but that’s not what we do. Why is this:

To return to the subject of stress, trimming your plants and removing the fan leaves are both stressful activities. Your plants will indeed recover. However, we want to limit stressful activities and allow plenty of time for recovery in between. Therefore, we prefer to carry out these tasks in “fits and spurts,” carrying out a very intensive defoliation before allowing the plant to recover.

Depending on how the plants appear and how it fits into our weekly schedule of duties at the farm, we usually perform a heavy defoliation in Weeks 2 or 3.

We wait a full two weeks after performing our thorough defoliation before returning at the conclusion of Week 4 or the start of Week 5. There you have it. Throughout the entire flowering season, we only do two defoliations, both of which are done early in the flowering cycle. Our plants are able to cruise through the second half of the blooming stage with little stress by restricting defoliation to two sessions in the first half of flower.

We are on Day 9 and, as you can see in the video up there, we haven’t yet performed any defoliation. You may watch the plants’ continued growth and how we’ve changed as we follow along week by week in our next film.