The first step in growing prickly pear cactus pads from a cutting is to carefully remove a pad from the main plant. Make an effort to separate as neatly as you can. Then let the cut end of your pad dry and harden slightly. While you are waiting for the cut end to heal, it may start to turn a little brown.
It ought should take a week or so. You don’t have to wait for the roots to sprout like you do with many other plants. The soil will experience this. (However, I believe mine had just started to sprout.) I left mine out on my dining room table for approximately two days because they had just been cut and had been in transit for about four days.
Why do the cut ends need to callus over?
In general, cacti don’t require a lot of water, and too much of it can quickly kill plants. A fresh cutting is comparable to a main line into the plant. If you take a cutting and plant it right away, it should survive without water for a few days. However, by allowing the cutting callus to form first, you increase your chances of success.
The callus serves as a barrier to stop the cutting from absorbing too much water. Other plants that are similar to it, such as succulents and snake plants, can be propagated using the same method. (See also my posts on how to grow succulents from leaves and cuttings and my explanation of how to grow snake plants in four different ways.)
Step 2: Plant the prickly pear cutting
Planting should be done once the cuttings have callused over. If you have access to rooting hormone, you can dip the cut ends of the pads into it before planting them, but it’s not necessary. The prickly pear is not one of the plants that I typically reserve rooting hormone for.
Simply place the cuttings upright in succulent or cactus soil that drains well, and water. Seek out my simple, three-ingredient succulent soil mix or simply get one from the supermarket marked “succulent” or “cactus.” Avoid use common, well-draining potting soils. For better drainage, ucculent/cactus soil contains more additions like sand and perlite.
When the top several inches of soil become dry, water the cuttings. Try to very gently tug on the cuttings after a few weeks. If you encounter opposition, kudos to you! Your cutting’s roots are starting to form. If a few weeks have passed and you are still not experiencing resistance, don’t worry. It may take some time, especially in the colder months of the year.
Step 3: Transplant or water as normal
My prickly pear pads didn’t require transplanting because I put them in the container I intended to keep them in. Wait until the roots are comparatively established before transplanting them if necessary. Make sure to cut back on watering once the roots are established and to wait until the soil has dried up before watering again.
An overwatered cactus will definitely die! Avoid over-watering the soil, as you did during the propagation phase. Since it is now a separate plant, root sprouting no longer requires additional assistance.
Can a prickly pear cactus be grown from a cutting?
Although it can be tricky, growing cacti is quite simple! The Opuntia genus, widely known as the prickly pear cactus, is a good example of this. You can grow these drought-tolerant plants from seeds or cuttings, and we’ll show you how to do both. Thanks to prickly pear cactus propagation, your one cactus will soon grow into a large garden with a distinct southwest flair!
The huge genus Opuntia contains more than 150 species. You may quickly obtain a sense of some species’ traits by looking through images, such as those of Opuntia microdasys. They have segmented stems, known as paddles, and pink or yellow flowers are typically found at the top. The fruit, known as “tuna,” is frequently consumed raw and Opuntia ficus-indica is farmed for both the fruit and the pads commercially. Glochids, a fancy name for microscopic hairs and bothersome spines, cover the paddles. When handling prickly pears and their thorny fruits, always use heavy gloves since the glochids are uncomfortable to touch and difficult to remove from skin.
Growing prickly pear cactus is just as simple as propagating it. Even though cacti are often associated with hot climates, Opuntia species can be found naturally growing in some places of Canada! This cactus is among the hardiest on the planet, enduring continuous temperatures well below freezing. You shouldn’t have any trouble maintaining your new plants once they’ve been propagated outside in full sunlight.
How much time does it take prickly pear cuttings to root?
Growing prickly pears is simple. Once planted, they can thrive on rainfall and require well-drained soil. The plant has to be watered every two to three weeks while it is rooted. Consider the size the cactus will reach when selecting one, and plant it far from walkways and other places where people will come in contact with it. A warm, dry climate is necessary for successful prickly pear cultivation.
Prickly pears are simple to grow in your own garden. Quick and easy propagation from pads is possible. In reality, the pads are flattened, specialized stems. Six-month-old pads are taken out of the plant and placed in a dry location to allow the cut end to develop a callus for a few weeks. For prickly pear pad planting, a soil and sand mixture should be used in equal parts. Within a few months, the pad will develop roots. It need assistance at this time and shouldn’t be watered. After the pad is able to stand upright, it can be watered.
Can you plant a portion of cactus that has been chopped off?
A loved cactus plant might quickly lose a portion due to overly active kids, scavenging animals, an accidental bump, or an unplanned incident. You need not worry if it occurs to you because you are not required to discard the chopped piece.
Even if the main plant can still survive if a portion of its stem is lost, it may seem wasteful to toss the broken piece and ignore the rest.
Can you then cut a chunk off of a cactus and plant it? Yes is the clear-cut response. Cuttings can be used to grow a sizable number of cacti species. Hedgehog, prickly pear, and branching columnar cacti like the night-blooming cereus are a few of the common cactus species that are typically reproduced via cuttings.
Don’t discard the broken piece if your cactus accidently breaks off a portion of it. Instead, replant it from seed and let it grow.
How are prickly pear puppies reproduced?
It’s time to pot up offsets from cacti after removing them and letting them callus. The ideal medium is grippy and well-draining. You can buy cactus mixes or make your own by mixing 50 percent peat or compost with 50 percent pumice or perlite.
Cuttings only require a pot that is slightly larger than their base diameter. In order to prevent the offset from toppling over, cover one-third to one-half of the base with the medium. Keep the medium mildly moist and place the pup in indirect but bright sunlight.
Although some cacti can take months to root, most do so in four to six weeks. By observing any fresh green growth, which shows that the roots have taken hold and the plantlet is receiving nutrients and water, you may determine when it has rooted.
How is a cactus propagated from a cutting?
If you want indoor plants that practically care for themselves, succulents and cactus plants are the ideal choice.
As detailed here, stem or leaf cuttings can be used to readily propagate the majority of cacti and succulents. Always remove entire segments from cacti with segmented stems (such as Christmas cacti and prickly pears), as cuttings don’t divide segments in half.
Aloes, haworthias, and agaves are clump-forming succulents that can be divided by simply removing the plant from its container and slicing the rootball. Numerous Mammillaria and Echinopsis cacti can be separated, or individual heads can be removed and used as cuttings.
In our No Fuss video guide, Kevin Smith of Gardeners’ World Magazine demonstrates how to use cactus plants to make a visually appealing display. Kevin discusses the benefits of using salad tongs to handle cacti, the best compost to use, and how to make attractive mulch.
Step 1
Select a healthy stem that is at least 10 cm long and use snips to cleanly cut it off. When handling spiky cacti, use tongs. Remove entire leaves from plants without stems by hand; don’t chop them off. Until the cut surfaces have healed over, leave cuttings on a window sill.
Step 3
After heavily watering, set the pot on a warm ledge that’s preferable out of the sun. Cuttings of succulents or cacti shouldn’t be put in propagators or covered with plastic bags.
Step 4
Watch the cutting and moisten the compost when it feels dry. The majority of cactus and succulent cuttings take a month or less to root, although new growth could take longer.
Pruning:
Prickly pears don’t need to be pruned, but they can be trimmed back. To keep the pads’ size and shape, take out individual ones as necessary. Holding the pad in place with tongs, cut it off at the junction or line where it attaches to the following pad. Pads can be calloused off and shared with pals or planted somewhere else. Find out more about propagation below.
Amendments & Fertilizer:
Young plants should be fertilized with a balanced 10-10-10 fertilizer. A water-soluble fertilizer with a ratio of 5-10-10 or even 0-10-10 can encourage more flowers and fruit in established plants. Use a nitrogen-rich fertilizer if you’re growing for the pads.
Watering:
Prickly pears can withstand severe droughts. For the first month, don’t water newly propagated pads. After that, water during the first year every two to four weeks—twice a month in the summer and once a month throughout the other seasons. Rainfall will usually be sufficient to keep established plants alive. When there is a drought, you can supplement with the twice-monthly/once-monthly seasonal schedule.
off a pad pruning, a new prickly pear plant has grown. Selma Jacquet/Alamy Stock Photo provided the image.
Propagation:
Since seeds grow slowly at first, it can take your plant three to four years to begin blooming and bearing fruit. The seeds should be maintained moist until they begin to sprout since they require shade.
Pad propagation is considerably easier and produces results more quickly. This is how:
- By according to the above pruning rules, you can take off pads that are at least six months old.
- The cut end of the pads should create a callus if they are left to dry out in a spot with some light shade. This can take two to four weeks in warm, dry weather, but it may take longer under cool or humid conditions. It prevents the new plant from decomposing at the base.
- Plant pads at a depth of 1 inch in a mixture of half soil and half sand once they have fully calloused over. Your plant could rot if it were buried any deeper.
- For the first month, don’t water it because the pad already has enough moisture to survive.
- Until roots develop during the course of the following month, support it with rocks or another type of structure. Your plant should be able to stand on its own after a month, but if it’s still a little unsteady, keep providing support.
- You can water it at this time and follow the previous watering instructions, just make sure to let it totally dry between waterings.
Flowers and fruit normally start to appear on young plants by the second or third growing pad.
What’s the rate of prickly pear growth?
One of the most common cactus genera in the United States is the prickly pear cactus (Opuntia). This plant, which has over 100 species, is distinguished by its spiny, flat, club-shaped pads. While some species have small, detachable barbs that resemble hairs, others have enormous, rounded spines. While cacti are typically thought of as warm-weather desert plants, certain varieties of prickly pear are tolerant of temperatures as low as USDA zone 4. The optimum time to grow prickly pears outdoors is in the spring, after any risk of frost has passed. Although the plant grows slowly and it might take up to three or four years before a new plant begins bearing fruit, some prickly pears are prized for their edible fruits.
Can prickly pears be grown indoors?
Opuntia species, including prickly pears, are relatively common desert cactus planted as indoor houseplants. They have wide, flat, thick, spine-covered pads on segmented stems that are exceedingly decorative.
Others contain small, hair-like barbs that detach upon contact with the plant, stick in the flesh, and can be challenging to remove, so treat with caution. Some have huge, rounded spines.
The edible, lemon- or plum-shaped prickly pear fruit of several Opuntia species, commonly referred to as “Indian figs,” is becoming into a delicacy in the UK. They are attractive and colorful as well. When fully grown, the meat inside turns orange and the outside turns bright red. When ripe, some types have a yellow outside and a green interior. These are utilized in syrups, preserves, and jellies because they aren’t quite as sweet. However, for plants to grow healthy fruit in the UK, the environment must be ideal.
Cultivation
Prickly pears should be cultivated inside in a conservatory or heated greenhouse with good, all-around lighting, ideally with a south or west facing aspect. In the summer, they require 4-6 hours of direct sunlight.
Although they are not cold- or frost-resistant, they can be brought outside in the summer to a warm, sunny patio. Make sure to bring them inside before the early autumn weather turns chilly.
They require minimum spring and summer temperatures of 18C (65F), however while they are dormant, they prefer colder temperatures of 7-13C (45-55F). Keep them away from radiators, direct heat, draughts, and fans, which can lead to temperature changes.
Prickly pear cactus varieties
Opuntia has more than 200 different species. From low-growing plants that grow to a height of 30 cm (1 foot) to those that can easily reach 5.4 m (18ft).
Opuntia microdasys, sometimes known as bunny ears, is likely the best kind to cultivate at home. Only reaching heights of 30-45cm (12-18in), it has oval pads covered in tufts of tiny, golden spines. But don’t let their diminutive size deceive you; if they get caught in your fingers, these tiny barbs can be just as unpleasant as much larger spines.
Planting prickly pear cacti
They require a compost that is extremely well-drained, just like all other desert cactus, so either add more grit to John Innes Compost or, even better, use a compost that is recommended for cacti and succulents.
To give the compost a natural, finished appearance and to help prevent the plant’s base from lying in wet compost, add a topdressing of gravel, pebbles, or sharp sand on top of the compost.
When working with the plants, be mindful of the spines. It is preferable to wear gloves and wrap a collar made of rolled-up newspaper around the stem when potting up or otherwise moving the plants.
How to care for prickly pear cacti
Many people mistakenly believe that desert cacti don’t require any watering. They can withstand extended droughts by storing water in their stems, but if given enough water, they develop and blossom considerably more effectively. When plants are growing (from March/April to September), water them heavily, but when they are dormant, water them less frequently—once or twice a month may be adequate. Before watering it once more, let the compost somewhat dry out. Never let the pot sit in water; always let the compost drain.
Feed with a balanced liquid feed once a month from late spring to late summer while plants are growing; do not feed in the fall and winter.
Only when it is absolutely necessary, such as when they become very potbound or outgrow their current container, can prickly pears be replanted. Repotting should only be done in late spring or early summer into a larger pot.