The first step in growing prickly pear cactus pads from a cutting is to carefully remove a pad from the main plant. Make an effort to separate as neatly as you can. Then let the cut end of your pad dry and harden slightly. While you are waiting for the cut end to heal, it may start to turn a little brown.
It ought should take a week or so. You don’t have to wait for the roots to sprout like you do with many other plants. The soil will experience this. (However, I believe mine had just started to sprout.) I left mine out on my dining room table for approximately two days because they had just been cut and had been in transit for about four days.
Why do the cut ends need to callus over?
In general, cacti don’t require a lot of water, and too much of it can quickly kill plants. A fresh cutting is comparable to a main line into the plant. If you take a cutting and plant it right away, it should survive without water for a few days. However, by allowing the cutting callus to form first, you increase your chances of success.
The callus serves as a barrier to stop the cutting from absorbing too much water. Other plants that are similar to it, such as succulents and snake plants, can be propagated using the same method. (See also my posts on how to grow succulents from leaves and cuttings and my explanation of how to grow snake plants in four different ways.)
Step 2: Plant the prickly pear cutting
Planting should be done once the cuttings have callused over. If you have access to rooting hormone, you can dip the cut ends of the pads into it before planting them, but it’s not necessary. The prickly pear is not one of the plants that I typically reserve rooting hormone for.
Simply place the cuttings upright in succulent or cactus soil that drains well, and water. Seek out my simple, three-ingredient succulent soil mix or simply get one from the supermarket marked “succulent” or “cactus.” Avoid use common, well-draining potting soils. For better drainage, ucculent/cactus soil contains more additions like sand and perlite.
When the top several inches of soil become dry, water the cuttings. Try to very gently tug on the cuttings after a few weeks. If you encounter opposition, kudos to you! Your cutting’s roots are starting to form. If a few weeks have passed and you are still not experiencing resistance, don’t worry. It may take some time, especially in the colder months of the year.
Step 3: Transplant or water as normal
My prickly pear pads didn’t require transplanting because I put them in the container I intended to keep them in. Wait until the roots are comparatively established before transplanting them if necessary. Make sure to cut back on watering once the roots are established and to wait until the soil has dried up before watering again.
An overwatered cactus will definitely die! Avoid over-watering the soil, as you did during the propagation phase. Since it is now a separate plant, root sprouting no longer requires additional assistance.
Can prickly pear cactus be grown from a cutting?
Although it can be tricky, growing cacti is quite simple! The Opuntia genus, widely known as the prickly pear cactus, is a good example of this. You can grow these drought-tolerant plants from seeds or cuttings, and we’ll show you how to do both. Thanks to prickly pear cactus propagation, your one cactus will soon grow into a large garden with a distinct southwest flair!
The huge genus Opuntia contains more than 150 species. You may quickly obtain a sense of some species’ traits by looking through images, such as those of Opuntia microdasys. They have segmented stems, known as paddles, and pink or yellow flowers are typically found at the top. The fruit, known as “tuna,” is frequently consumed raw and Opuntia ficus-indica is farmed for both the fruit and the pads commercially. Glochids, a fancy name for microscopic hairs and bothersome spines, cover the paddles. When handling prickly pears and their thorny fruits, always use heavy gloves since the glochids are uncomfortable to touch and difficult to remove from skin.
Growing prickly pear cactus is just as simple as propagating it. Even though cacti are often associated with hot climates, Opuntia species can be found naturally growing in some places of Canada! This cactus is among the hardiest on the planet, enduring continuous temperatures well below freezing. You shouldn’t have any trouble maintaining your new plants once they’ve been propagated outside in full sunlight.
How much time does it take prickly pear cuttings to root?
Growing prickly pears is simple. Once planted, they can thrive on rainfall and require well-drained soil. The plant has to be watered every two to three weeks while it is rooted. Consider the size the cactus will reach when selecting one, and plant it far from walkways and other places where people will come in contact with it. A warm, dry climate is necessary for successful prickly pear cultivation.
Prickly pears are simple to grow in your own garden. Quick and easy propagation from pads is possible. In reality, the pads are flattened, specialized stems. Six-month-old pads are taken out of the plant and placed in a dry location to allow the cut end to develop a callus for a few weeks. For prickly pear pad planting, a soil and sand mixture should be used in equal parts. Within a few months, the pad will develop roots. It need assistance at this time and shouldn’t be watered. After the pad is able to stand upright, it can be watered.
Method
Cut off the prickly pear’s two ends:
Peel the skin back:
Peel off a small section of the prickly pear’s thick, fleshy skin. Throw away the skin. The prickly pears themselves will be all that is left.
If you prefer the seeds, feel free to simply chop the prickly pear up and eat it with the seeds and all. The flesh is covered in a ton of tiny delicious seeds.
Take the juice out:
The “husked” prickly pears should be added to a blender or food processor and pulsed until they are liquefied to extract the prickly pear juice.
Put the juice through a fine mesh strainer, then strain it into a bowl or pitcher. Throw away any leftover pulp and seeds.
Anyhow you like, use the juice. 6 to 12 prickly pears, depending on their size, can provide around 1 cup of juice. Just use equal portions of prickly pear juice and fresh lemonade when blending it in.
Do you have a favorite recipe for prickly pears? Please share the information with us in the comments.
How are cactus cuttings planted outside?
Put on safety goggles, gloves, and other protective clothing, and then sanitize your cutting instruments by soaking the blades in Lysol. When removing a cutting from a cactus with spines, choose a stem or pad to trim from the plant and fold a piece of newspaper around the stem to use as a handle. Cut a 3- to 6-inch-long piece from the skin, place it aside in a shaded area, and allow the cut to end to scab for up to a week. In most cases, rooting compound is not required.
No matter if they are found in the desert or the tropics, cacti need a loose, well-drained soil or potting mix. Select a warm, protected spot outside with full or partial sun. To lighten the soil, add some sand or gravel along with some compost. You may also create raised beds and fill them with cactus soil or your own blend of coarse sand, pea gravel, compost, and peat moss or coconut coir. Before inserting the cutting with one or two nodes under the earth, fill the planting hole with water and let it drain. Stakes may be required to support larger stem cuttings.
Put the cuttings into moist cactus potting soil indoors, or, as suggested by Master Gardener Candice Hart, a mixture of potting soil and perlite or coarse sand. The segmented stem parts of the holiday cacti will also sprout from one or more of them. Right-side up, place one segment about halfway into the moist mixture. Put the pots and cuttings in a warm, shady area of the garden or in bright, filtered light. Take the pots inside if the temperature drops because tropical plants can’t resist frost.
Can prickly pear cactus be replanted?
Pear cacti (Opuntia spp.) give ornamental and edible value to landscaping in USDA hardiness zones 9b through 11 with their sweet, scarlet fruit and stunning appearance. Many mature pear cacti outgrow their bed and need to be transplanted into a larger place because of their rapid growth pace. The majority of pear cacti adapt well to transplantation and quickly form a new root system. To genuinely prosper, they must be moved at the proper time of year and positioned properly.
Plant pear cactus between late March and early September, when they are actively growing. Avoid moving and digging up pear cacti when it’s chilly outside since the cactus will take longer to establish itself and its roots will grow more slowly.
Place pear cactus in a bed with poor, gravelly soil that receives full light. A loam or clay-based soil should not be used for transplanting since it will retain too much water around the roots of the cacti, encouraging rot and disease.
In advance, clear the transplant site of any weeds, decaying plants, or other debris. Add a 4-inch-thick coating of pea gravel, washed sand, or crushed granite to the entire bed to improve it. Utilizing a cultivating fork, work the amendment into the top 12 inches of soil.
The pear cactus should be ready for transfer. Mark the cactus’ north-facing side with colorful chalk or tape. After you’ve dug out the cactus, trim about a quarter of the pads to prevent water loss. Put on leather gloves to protect your hands, then use a sharp gardening knife to cut the pads off.
Around the pear cactus’ base, take a measurement of 6 inches. Use a sharp shovel to create an 8 to 10-inch-deep ring around the cactus at the 6-inch mark. Place the shovel’s blade at a 45-degree angle underneath the root ball. To pry the cactus from the ground, use the shovel’s handle.
Take hold of the pear cactus’ base and gently lift it off the ground. Place it somewhere with some light shade and open air. Examine the rootball of the cactus by turning it on its side. A pocketknife or pair of scissors should be used to remove any harmed or infected roots.
Dry out the pear cactus for seven to ten days, or until the roots start to look calloused. Before transferring the cactus into the light, make a hole there. Create a hole that is the same depth and twice as wide as the rootball of the cactus.
Transfer the pear cactus to the new location. Put it in the hole with the north-facing side pointing that direction. Use the adjusted dirt to re-fill the area surrounding the roots. To prevent the cactus from toppling over, tamp the ground with your foot.
To avoid sunburn and reduce moisture loss from the pads, cover the pear cactus with a layer of 30% shade cloth. Until the cactus pads swell and begin to grow, leave the shade cloth in place for at least three weeks.
Before watering the newly transplanted pear cactus, wait three to five days. Create a 6-inch-radius shallow dirt mound all the way around the cactus’ base. Run a hose inside the berm until the top 3 to 5 inches of soil feel moist. After allowing the water to absorb, flatten the berm.
For the first two months, water twice a week to aid in the cactus’ establishment of new roots. Run water until the top few inches of the soil feel damp at the base of the pear cactus. Between waterings, let the top inch of soil completely dry out. When it’s raining, stop watering.