Why Is My Indoor Fern Turning Brown

Many of the inquiries we receive regarding ferns focus on their brown foliage. Fern leaves may become brown for a variety of reasons. The majority of them are not serious and are simple to solve.

Let’s begin with the most typical. It’s quite natural and indicates that your plant is doing well if the bottom of your fern has brown leaves but the top is green. New growth emerges from the center for almost all fern species. The older leaves at the bottom will drop off as new growth emerges. Just cut any brown ones off at the base.

Your fern could not be receiving enough moisture if you’re noticing a lot of brown leaves. Check them frequently and water them if the soil ever seems dry because they prefer their soil to be lightly damp but not soggy. Use the finger-dip test to determine whether someone needs to drink something. If you detect moisture, they are currently in good condition; you can recheck them in a few days.

For ferns, humidity is extremely crucial. They will become crispy if the air is too dry. Try misting your fern more if it has a brown appearance all over and watch to see if it gets better over the next few weeks. Even better, put it in the bathroom where it can take advantage of the shower’s steam.

Furthermore, keep in mind that ferns are accustomed to living in the shade of larger trees. They weren’t designed to sit in the sun. Yours can be drying out in the sun if it’s directly near to a window. Place it in a darker area. Keep them away from hot radiators and chilly windows, just like you would with any other indoor plant.

The last thing to keep in mind is that most ferns, especially Venus, our maidenhair fern, are delicate to touch. Their leaves appear to be strokable, but the more you stroke them, the more they bleed, turning them brown. Just try to stand back and admire them.

How can a brown fern be revived?

Create a humid microclimate around the fern in your home to mimic the humid circumstances of the fern’s natural environment in order to revive ferns with browning and dried-out leaves.

  • Put your fern in a space that has a higher humidity level naturally, like a bathroom or kitchen. The air in a bathroom is typically much more humid than the air in any other room in the house, and it most closely reflects the humidity found in the ferns’ natural habitat. This causes less water to evaporate from the leaves and keeps them from drying out.
  • Put the potted fern on a saucer or tray that has water in it but is supported by rocks. The water in the area under and surrounding the pot evaporates, creating a humid microclimate that mimics the ferns’ preferred natural humid conditions and keeps the leaves from becoming brown. Keep the pot above the water line to prevent root rot from occurring from the soil getting too wet.
  • Water ferns regularly, but not until the soil is completely wet. Ferns thrive in soil that is rich in organic matter and has good drainage so that the roots are not seated in soggy dirt. This soil maintains moisture around the roots over time. Plant ferns in good compost that is rich in organic matter, and water as often as necessary to keep the soil evenly moist (exactly how often depends on your climate and conditions, but if the leaves are dying and turning brown while the soil feels a little dry, you are probably underwatering your fern).
  • Never water ferns lightly; always give them a full soak. A generous watering ensures that moisture enters the fern’s roots where it is needed, where it may subsequently be transported by the roots to the leaves to prevent browning and crispying. Too little watering results in moist potting soil on the surface but insufficient water penetration to the roots. Always water deeply, letting extra water drip from the pot’s base.
  • Keep the fern out of direct sunlight and place it in a shaded area. Find a space in your home that is not exposed to direct sunlight as this will scorch the leaves and dry out the soil, resulting in brown foliage. Ferns do best in shady areas.
  • Instead of using hot or cold water to water the fern, use lukewarm water. The majority of indoor ferns are tropical plants, so providing them with lukewarm water mimics their natural environment. Their delicate roots may experience shock if the water is excessively cold, which may contribute to the leaves becoming brown.
  • Place the fern away from any air currents or draughts caused by forced air systems or air conditioners. The heating and cooling systems’ on-and-off cycles produce varied conditions for ferns that lead to plants turning brown as an indication of stress as the temperature changes throughout the year. To lessen water loss from the leaves, place your fern in an area without drafts.
  • Increase the number of plants in the area to increase the humidity. By clustering multiple leafy houseplants together, you can assist create a humid microclimate around your fern that can help it recover and mimic the kinds of growing circumstances it would experience in its native habitat.
  • A humidifier is the best thing you can do to revive ferns. This is unquestionably the finest technique to mimic your fern’s original humid environment and generate the humid conditions around it. Since a humidifier allows you to accurately adjust the humidity % to the ferns’ preferred range, you can attain the ideal degree of humidity for ferns to flourish. many humidifiers A humidifier is far more successful at restoring your fern than other methods of increasing humidity.
  • A humidifier is frequently preferred over misting ferns with a spray bottle because spraying some fern species might raise the risk of foliar leaf spot disease if the leaves are continuously damp from regular misting.
  • Use a good pair of pruners to remove any brown growth and promote the growth of healthy, green growth. The brown fern leaves never regenerate, but cutting them down can encourage fresh, healthy growth and enhance the aesthetic of the plant.

With a few little tweaks, you can successfully mimic the fern’s natural environment, which decreases water loss from leaves and keeps them from drying up and becoming brown.

When the environment is right for ferns, the plants should revivify. New growth should appear during the growing season, albeit some growth may still be crispy, especially at the tips.

How can an indoor dying fern be saved?

Outdoor ferns need organic, well-draining soil, inconspicuous light, and an abundance of water, just like interior ferns need. Try these remedies if your fern appears sickly and droopy because of the hot weather, excessive or inadequate watering, or an unfavorable location:

If your soil is clay and doesn’t drain well, remove your fern and fill the hole with organic material or compost. Replace the fern, give it plenty of water, and let it a few weeks to recover. If the fern is currently exposed to direct sunlight and has browned leaflets or fronds, transplant it. The majority of ferns thrive in light, dappled shade, or intermittent shade. If the fern’s fronds droop between waterings, spread a layer of compost, leaves, or wood chips around the base of the plant. The fern will retain moisture thanks to the mulch. To prevent burning its leaves, don’t feed your fern. The soil provides enough nutrients for the majority of outdoor ferns.

Will a dead brown fern resurrect?

If you set the right conditions for growth, you can revive a dried-out fern. Since most ferns are hardy plants, once the problematic conditions are fixed, they usually recover within a few weeks.

The good news is that the fern will grow again in spring once the temperatures rise, even if it is dead now, which is typical in frigid temperatures during winter.

Steps to Revive A Dried Out Fern:

First, water the plant and give it an hour to soak. Run a knife around the rootball and tap the pot against the edge of a table. Take the plant out of its container.

Step 3: Remove fading or dead roots and tease out tangled roots. Keep the healthy ones alone.

Step 4: Insert a piece of wire mesh into the bottom of a fresh pot. Organic soil that has been well-drained should fill the pot’s lower half.

Step 5Set the plant in the center and gradually enlarge the area around it with potting soil. With your thumbs, compress the compost.

Step 6: Water the compost to keep it damp but not drenched. Between waterings, the compost should be dry.

Step 7Sit the pot in full sunshine on a windowsill that faces north.

How to save a fern from dying?

A fern that is being grown indoors or outdoors is almost certainly dying from inadequate drainage. The soil or potting mix used outdoors must have good drainage. The clogging of drainage holes does occur frequently. Take a pencil and insert it into the drainage hole to see if that is what happened to you.

Because the fern has outgrown the pot, it may occasionally be drying out or dying. In this situation, repotting the plant right away can be too much of a shock for it. Keep it in the same pot until it has recovered, and then you can repot the fern in a larger container if you notice fresh growth.

How to revive a dried out fern in a pot?

Keep the fern in its container and trim any dried-out fronds to a length of 2 inches, leaving the healthy, green leaves alone. The center should have robust upright fronds. Delete the top 2 inches of the compost, then add new potting soil.

Soak a plant in a big bucket until it totally drains. Place it in bright light, away from the sun, on a windowsill or in the open air. Repotting ferns should generally be done in the spring when the roots have filled the pot. Repotting young specimens should be done once a year.

I hope you found this post’s material beneficial. Please feel free to share it with your loved ones and friends.

Tell me what ferns you are growing in the comments area below. What issues did you have with ferns?

How often should indoor ferns be watered?

If you pay attention to getting the watering right, hanging ferns make excellent indoor plants and are simple to care for. Contrary to what you would believe, this is a lot simpler.

Watering hanging ferns two to three times weekly is ideal.

You should give the garden fern as much water as you can. During the summer, give your indoor fern a regular drink of water. To prevent the leaves from turning yellow, spray them every two to three days. As the plant starts to get ready for winter at the end of the summer, watering should be somewhat reduced.

They are the perfect plant to have in any home due to their adaptability and ease of growth. One of the essential components for keeping your fern in prime condition is proper watering.

What appearance does an overwatered fern have?

Although Boston fern needs slightly moist soil, soggy, waterlogged soil is more prone to cause rot and other fungal diseases. Yellowing or wilted leaves are frequently the first indication when a fern is overwatered.

Touching the dirt with the tip of your finger is a guaranteed technique to tell when to water a Boston fern. It’s time to water the plant if the soil’s surface feels a little bit dry. Another sign that a fern needs water is the weight of the pot. The pot will feel quite light if the soil is dry. Wait a few days before watering, then retest the soil.

Use water that is room temperature to thoroughly water the plant until the water flows through the bottom of the pot. Never let the pot stand in water and always allow the plant drain completely.

If you create a humid environment, Boston fern watering will be improved. A tray of wet stones is a more efficient approach to raise the humidity surrounding the plant than occasionally misting the fronds.

Set the pot on a layer of damp pebbles or gravel that has been spread out on a plate or tray. To keep the pebbles continually moist, add water as needed. Make sure the pot’s bottom doesn’t come in contact with water, as root rot can result from water leaking up through the drainage hole.

How can I make my ferns green once more?

Ferns, like other plants, occasionally need nourishment to replenish the soil. To make sure the ferns get enough (but not too much) nitrogen and minerals, use a decent houseplant diet.

Ferns that are turning yellow may be a warning that they aren’t receiving enough of the nutrients they require. How do you address this issue other than with the appropriate amount of plant food?

Believe it or not, the secret to growing lush, green ferns that I picked up from my neighbor is Epsom salt.

How does Epsom salt help with fern care?

Epsom salt is a wonderful material that has numerous benefits. Have you ever taken an Epsom salt bath after having painful muscles and felt better? You might have even had a better night’s sleep. The beneficial minerals magnesium and sulfate combine to form the mineral complex known as epsom salt. Many people lack enough magnesium, so taking a bath in Epsom salts can help restore levels through the skin.

What does that have to do with caring for ferns, then? It turns out that plants require magnesium and sulphur just like people do. And watering them can cause them to lose these materials over time. The solution is Epsom salt!

How do you use Epsom salt for ferns?

Simply combine 2 teaspoons of Epsom salt with a gallon of water and spray the solution over the ferns once a month to take care of them.

For step-by-step instructions on how to utilize Epsom salt for healthy tomato plants as well as reliable fern care, view the video on this page. (Learn more about tomatillos here!)

Emergency Fern Care: How do you revive a dying fern?

Applying the advice and information above to ferns that are already in pots and on the verge of dying may help you save them. Additionally, make sure the drainage holes in the fern pot are clear of obstructions. A drainage hole can be reopened by inserting a pencil into it.

Trim the leaves of a fern with dried-out fronds so that only the healthy portions of the leaves are left close to the pot. After that, take off the top few inches of the old potting soil and replace it with fresh. Give the fern a thorough soak in a location where it can totally drain.

To prevent the roots from filling the container too much, you might need to repot ferns in the spring.