Why Is My Houseplant Soil Moldy

Mold concerns are caused by moist potting soil and inadequate drainage. Bad Drainage Long-term sogginess in the potting soil causes the plant to start dying and may result in mold growth. Mold spores thrive in the decaying roots, stems, and leaves.

How can mold in indoor plant soil be eliminated?

  • The mold is typically white and fuzzy; find it. Scrape the rotten dirt with a spoon before throwing it away. To keep your health safe while eradicating the mold, put on a dust mask. It is preferable to repot the plant if there is a lot of mold present.
  • Add an antifungal solution to the soil after removing the mold. In order to stop the majority of the mold from growing back, you might choose to sprinkle cinnamon or baking soda. Aim to evenly distribute the anti-fungal and avoid using too much.
  • If the plant has mold, get rid of it right away. Use a paper towel to gently wipe the mold from the leaves after lightly dampening it. Make sure to replace the paper towel after each wipe. To prevent the spread of mold spores, replace the paper towel once every component has touched the moldy surfaces. Remove any leaves that still have mold on them that may be seen.

Why is the dirt around my plants getting mold?

If you know what to do, getting rid of mold is not a very difficult task. When most people discover mold, they automatically assume that their plant is doomed, but this is not the case. Common causes of mold growth include overwatering, inadequate drainage, and occasionally even the use of soil that is soaked with decomposing organic matter or that has already been contaminated.

It is too late to begin preventative care if mold is already present on the soil of your plants, but it is not too late to begin corrective measures. You must first get rid of the mold from the soil before you can begin to make it difficult for mold to grow. The following 5 methods will help you get rid of the ugly white mold in your plant’s soil.

What eliminates potting soil’s mold?

In the right amount of moisture, earth is perfect for houseplant growth. Overwatered plants serve as the ideal breeding ground for mold because it, too, thrives in moist environments. The typical white mold is a form of saprophytic fungus, which feeds on and decomposes organic matter, and it sticks to soil particles.

The fact that Saprophytic Fungus won’t immediately harm indoor plants should give those with green fingers some peace of mind. Instead, the mold is an obvious indication that some of the techniques utilized to take care of the potted plants were inadequate.

For a variety of causes, indoor plants’ soil becomes infested with mold. Spores flourish in an atmosphere created by overwatering. Mold can grow more readily in a pot that has insufficient drainage. Mold can appear when previously polluted soil is used. Spores have plenty of food from the moist, decomposing materials in the soil.

These four methods will help you get rid of the uncomfortable mold infestations in potted plants. Indoor houseplant owners have easy access to these techniques. Some advice for preventing mold formation on the surface of plant soil will also be helpful to gardeners.

Repot the plant

Completely repotting the plant will get rid of the mold. Substitute clean, new soil for the tainted one. To stop the regrowth of mold, throw away the currently infected soil. The pot needs to be completely cleaned out before the plant is introduced to its new environment.

Put the pot in a mix of nine parts water and one part bleach to eliminate mold spores. Rinse the pot with water and dish soap once the container has spent 10 minutes in the sterilized solution. Before adding soil, properly dry the container.

Rinse the plant’s roots and remove any remaining mold from its leaves before repotting it in the freshly cleaned container. Any spores that stay could lead to contamination once more. Apply a little fungicide to the plant as a last step.

Expose the plant to sunlight

Direct sunlight’s ultraviolet rays kill mold, making exposure to the sun a successful method of eradicating the spores. Just set the houseplants in a sunny area outside. The sun will successfully complete its task. This method is especially helpful if the mold develops on the soil’s surface.

An alternative strategy is to remove the moldy houseplant and spread out the damaged soil on an even surface under the sun’s rays if the plant is sensitive to direct sunlight. By using this technique, you may get rid of the mold while preventing the plant from being scorched or dried out by the sun.

Take it a step further and apply a solution of baking soda and water to the soil that has been spread out in the sun. Baking soda works to absorb the moisture from the mold spores while assisting in the future prevention of a mold outbreak.

Apply a fungicide

There are artificial and natural fungicides available. White mold spores, which are most frequently found on indoor plants, are efficiently inhibited from growing when potassium bicarbonate and water are combined. Apply a chemical fungicide as an alternative to combat mold.

Prepare the plant for the fungicide spray. Scoop off the moldy soil from the pot, which is typically located on the top layer. Wipe the plant’s leaves down with a damp hand towel or cloth to get rid of any mold spores.

Spray the plant liberally with the recommended fungicide after ensuring that there are no visible signs of mold on the leaves or soil. Be sure to liberally spray fungicide on the soil’s top layer in the pot as well.

Sprinkle an anti-fungal

To cure the mold colonies invading the soil, try using ground cinnamon, baking soda, and apple cider vinegar as natural anti-fungal remedies. The houseplant will continue to flourish by being treated with these non-toxic anti-fungal chemicals. Mold can be repelled with just a teaspoon or a few sprinkles on the soil’s surface.

In potted plants, mold formation can be easily avoided. Only water plants until the top two inches of soil are dry, as overwatering is the main cause of mold spores engulfing the soil. By inserting a finger into the top layer of soil, you may determine how dry the soil is.

Inadequate drainage is a factor in the development of mold and root rot. Discard the water in the plate under the pot after you’ve watered the plant. The water that has drained out must be removed to keep the soil around the plants from becoming overly wet.

While mold spores do not grow well in sunshine, many indoor plants do. Put a potted plant in the sun when a houseplant can withstand it well enough to prevent mold formation. Give plants a spot in indirect sunlight if they prefer fewer hours of direct sunlight.

What Is White Mold?

Over 360 different plants, including beans, peas, lettuce, and members of the cabbage family, are susceptible to white mold, also known as sclerotinia. When it affects tomatoes, white mold is also known as wood rot. On blooms, stems, leaves, and pods with water-soaked areas, mold signs might be seen. Pods could rot, and leaves would droop, yellow, and die.

During flowering, host crops are most vulnerable, although immature seedlings are also quite weak. White mold often infects plants in the early spring or summer and then grows slowly for a while before becoming noticeable. When it’s cool outside, the white mold fungus releases spores that can spread to other plants by being carried by the wind. Destroying affected plants as soon as possible is crucial in order to prevent the spread of white mold.

How to Identify White Mold Damage

Here are some typical white mold symptoms, though they might vary based on the location and plant type:

  • At first glance, the stem could seem to have a wet area. The plant will appear healthy from the top at this stage of the infection.
  • Individual stems are wilting, especially at the base where there is a tan discolouration.
  • There may be tan to dark brown blemishes on infected stems. Under situations of excessive humidity, a dense, cotton-like growth will develop from these wounds.

The Ohio State University provided the image. White mold’s dense, cotton-like growth completely consumes a bean plant.

How to Control White Mold

  • If you come across any sick plants, get rid of them right away.
  • Infected soil should be removed as much as possible and cleaned soil should be added in its place.
  • To stop the disease from spreading, cover the affected ground with a barrier like plastic or mulch.

Prevent White Mold

  • To prevent crowding, use well-drained soil and space your plants appropriately. Don’t forget to stay away from places with inadequate airflow.
  • Try to avoid soaking the tops of your plants when you water them. Alternately, water the plants in the morning to give them time to dry out before dusk.
  • To assist prevent infection, you can also spray your plants with a fungicide that has been approved. Just before the plants bud, spray them, and then sprinkle them once more a week later.
  • Get rid of the weeds. This disease can be carried by weeds and spread to your plants.
  • After harvesting, if at all feasible, eliminate all crop leftovers. This disease might manifest itself there if residue is left. Given the chance, white mold spores will survive the winter since they are long-lasting.

How do I get rid of the fungus in my soil?

It’s almost tough to completely get rid of nasty fungus. Even when there are no crops for them to eat, several forms of fungi can persist for years in soil. However, there are a few strategies to reduce the likelihood of these mushrooms returning to ruin your landscape.

  • Eliminate the unhealthy plants. You cannot save the plants after your garden has become sick. To prevent the spread of the fungus, remove the sick animals and dispose of them in a trash can rather than a compost pile.
  • At the end of the growing season, remove all garden detritus. Because fungus can consume dead plants throughout the winter, cut down the perennials, pull up the annuals, rake the leaves, and cart everything out.
  • Rotate your harvest. In your garden, plant different crops than you did the previous year. Place the herbs where the potatoes were, or the tomatoes where the marigolds were. If your garden isn’t large enough, wait a year or two before planting anything there to give the soil fungus no host plants to feed on. To ensure that you never run out of fresh vegetables, you can plant in containers for a year and then return to a ground garden the following year.
  • Plant varieties resistant to disease. In order to avoid common soil-borne diseases, look for vegetable and plant variety.
  • Employ a fungicide. Apply fungicide to your garden plants frequently and early before they become ill. Because a strong offensive is the best defense.

Does cinnamon keep mold at bay?

Some industries, like those that make baked goods, utilize cinnamon in their product packaging to prolong the shelf life of breads and cakes and prevent the formation of germs and mold that cause them to go bad. To make the process even more effective, there are plastic variants designed specifically for food items that already contain cinnamon. Imagine what it can do for your home if it can do that for bread.

Employing It:

Consider using a diffuser with cinnamon oil to bring a wonderful scent to your home and to combat airborne mold spores. You won’t just make your house smell better; you’ll also be killing the mold right where it thrives. Spores released from the mold’s original development are the mold’s quickest route to other, welcoming surfaces. Cinnamon oil is able to block it.

For even greater strength against bacteria and mold, combine cinnamon oil with your cleaning products. Try adding some cinnamon oil to vinegar if you don’t already combine it with your surface cleansers. There will be a pleasant aroma in your kitchen and other rooms, and you’ll get an extra boost that might make your house safer.

In your garden, try using cinnamon oil. During the winter, mold growth is obviously less of a problem, but once spring arrives, you can also have to deal with it outside your home. For indoor plants that can be particularly prone to mold formation, cinnamon oil can be applied to plant stems to significantly prevent any mold growth. The benefit of cinnamon oil over other fungicides is that it is safe for both children and dogs.

Rosemary and peppermint are other essential oils with anti-fungal and anti-mold effects. These two, along with a few others, can also aid in the battle against mold growth if you are unable to obtain cinnamon for any reason. But if you have the choice, choose cinnamon first because it’s the most useful.

Depending on the activity and aim, you may want to use different amounts of cinnamon oil in your combinations. One percent of cinnamon oil extract to 99 percent water is one of the recommendations, but if you are dealing with molds that are aggressive or particularly resilient, you might require a greater ratio. Having said all of that, don’t anticipate being able to handle all of your mold problems on your own. Although cinnamon may be excellent for preventing minor quantities of mold, you may need professional assistance if your entire home or even just one room is compromised.

You may reach Reset Restoration 24 hours a day, 7 days a week, to learn more about Tulsa restoration services if your friends, family, or neighbors have had major mold damage to their homes or businesses. Dial (918) 582-7373 to reach Reset Restoration right away.

What exactly is the white substance in the soil?

There is absolutely no reason to be concerned; the best course of action is to disregard it. Mycelium is the name for this whitish deposit. It is an organic material-degrading fungus that occurs naturally. You can find it on rotting straw or woody debris in compost piles, on leafmould and manure in the soil, and on an almost endless list of other places. Since it is unlikely to be present in soil that has never had substantial organic material added, some gardens will undoubtedly have more than others.

Mycelium poses no threat to humans, animals, or plants, so there is no need to remove it.

Members of Garden Organic can access our professional factsheets for further information about organic gardening. Factsheets can only be accessed with a members-only password.