Home delivery and digital customers only get access to TimesMachine.
It sounds terrible to “prune the roots” of a plant. However, once a houseplant reaches the desired size, it becomes a recurring requirement. Many indoor plants have the potential to get pretty big if left unchecked, but while a 30-foot-tall weeping fig is a beautiful sight on a Caribbean island, my living room ceiling cannot support such growth. Root pruning allows for new soil and new root growth without requiring a plant to be moved to a larger pot, and it also slows stem growth.
Whatever potted plant’s rate of growth—or attempt at growth—and any peculiarities it may have regarding root pruning will determine how frequently I prune it. For instance, my angel’s trumpet (Brugmansia spp.) undergoes one severe root and one stem trimming each year. However, my ponytail palm (Beaucarnea recurvata), which steadily fills more and more of its clay container with its bulbous stalk every year, hasn’t needed root pruning in 19 years.
Usually, plants will let us know when to prune their roots. A larger container or root (and stem) pruning is required if a plant is more than two or three times taller than the height of its pot and on the verge of toppling. Of course, there are exceptions, such as clivia, which flourishes despite being crammed for years in the same pot.
Additionally, plants have more subtle ways of letting us know when their roots need fresh soil: after their roots have filled a container, they will begin to dry up very quickly. Even the drainage holes may start to seep with tangled roots.
Slide the root ball out of the pot and examine it for clues as to whether the plant need root pruning. When the potting soil is just moist enough to work with, this is easiest. For smaller plants, I turn the pot on its side and tap the rim of the pot against the edge of my potting bench while keeping my hand flat on the soil at the base of the stem and the stem between my middle and index fingers. To move a large houseplant, such as my six-foot-tall weeping fig, I lay it on its side on the ground, secure the pot with my feet, and then pull on the stem. When thick roots are pressing up against a root ball’s edge or encircling its outer layers, it is time to root prune.
I either prune with a sharp knife or a saw, depending on the size of the root ball and the thickness of the roots. Now is the moment to remove a layer of dirt and roots from the area around and beneath the root ball while gritting your teeth. The amount to cut away will mostly depend on the size of the ball: I might remove anywhere between a half-inch from the top to the bottom of a small ball to two inches from the root ball of a plant growing in a big tub.
I then go over the entire root ball once more, this time removing soil and roots from all over its surface using a pronged hand cultivator or a stick. This encourages new roots to spread out fast into fresh soil. I always have a pair of pruning shears on standby to trim any spindly or broken roots.
The plant is ready to be put back into its pot after having its roots clipped. Dry or barely moist potting soil sifts most easily in between the roots. I start by adding enough dirt to the pot’s base so that the plant’s stem will rest a half-inch to an inch below the rim. After adjusting the plant’s height, I begin gently adding potting soil to the area between the root ball and the pot, packing it in with my fingertips or a blunt stick as I go. After firming the soil one last time once it has reached the desired level, I add additional if required.
When a plant is healing after root trimming, for a few weeks or longer, watering is crucial. I thoroughly wet the entire container right after pruning. I make sure to properly moisten all the soil at each watering when new growth starts. (Succulents are an exception; even after root cutting, let the soil to completely dry out between waterings.)
In order to limit the plant from becoming larger, the stems must be pruned in order to reduce the number of leaves that the smaller root system must sustain. It’s similar to cutting the grass: trim the tops (and the roots, if you’re root pruning a houseplant) when they get a little bit bigger than intended to a little bit less than desired, let the plant grow again, trim it back again, and so on.
That the plants won’t tolerate this treatment is unfounded. Consider bonsai trees that, according to consistent root and shoot pruning, can still be measured in inches even after 100 or more years.
How should overgrown indoor plants be trimmed?
An awareness of the plant’s growth pattern is necessary for effective pruning. Plants develop from the tip down, which means that a branch or stem’s dominant bud is where new growth first appears.
Snip off the dominant buds on a few stems, spacing the cuts to provide a variety of growth, to prune a plant to promote bushy new growth. Trim some branches down to their root, some back by half, and still others completely. In this manner, the random growth pattern will fill up the plant when it produces new leaves.
Simply removing any dead blooms is what is meant by the pruning technique known as “deadheading.” When a plant blooms, it diverts energy away from new development and onto its blossoms. A flower still uses energy from the plant even when it is fading. Deadheading is frequently required to extend the flowering season and promote healthy development.
Maintaining cleanliness is crucial during pruning. A plant’s tissue might become infected through any wound. Therefore, maintain your pruning tools clean and sterile by wiping them off after each use with a mild bleach and water solution.
A cup of water can be used to root most houseplant cuttings before they are planted to create new houseplants. Even better, succulent clippings can be multiplied by putting them straight in a pot of damp soil. You should have fresh plants developing after a few weeks.
How can house plants be made smaller?
Early spring, when houseplants are beginning to sprout new growth, is the ideal time to divide them.
Roots Run Wild 1.
If the roots of your plant start to grow past the drainage holes in the container, that is one of the easiest signs that it needs to be divided. A tangled root ball with minimal dirt will be all that remains of the plant when you remove it from the pot.
2. There is Water All Around
It’s probably time to divide your plant into smaller parts if water rushes out of the drainage holes every time you water. The divisions can be transferred into new containers.
3. Joking Around
A plant can occasionally get so big that it breaks the pot. This indicates that your plant is pleading for division. When the plant’s root ball becomes too thick, clay pots in particular frequently burst open completely.
4. Family Assistance
Some plants produce several offspring (also known as pups or offsets) around their base, which may eventually encroach upon the parent plant. It’s probably time to separate the entire family if your plant is surrounded by little versions of itself.
5. Experiencing Headaches
Some plants display the urge to divide by losing their ability to maintain their upright position and becoming top heavy or floppy. Additionally, they could start losing their bottom leaves, and floral plants could stop blooming.
Take the plant out of the pot. In order to loosen and remove the root ball, start by holding the plant upside down and tapping on the base and sides of the pot. You might need to cut or shatter the pot in some situations where the plant is particularly root-bound in order to liberate it.
When your plant has been removed from its previous container, set it down on a safe surface and use your fingers to release the root ball. After that, section the plant using a sharp knife. Ensure that each part has a few healthy leaves and a good area of roots.
As soon as you can, replant divisions in new potting soil. Maintain their growth at the same rate; avoid planting them too deeply in the ground. Place the divisions in a warm area with bright, indirect light, and water them. When they become established, they might not immediately put on much new growth, but once they do, your divisions will flourish like new to share with friends or place in different locations around your house.
When should I trim my houseplants back?
The start of the growth season is the ideal time to prune indoor plants. The greatest time to care for most houseplants is in the late winter or early spring, when the days are getting longer and the plants are beginning to awaken. If you decide to prune flowering plants, you might want to do it immediately following a flowering cycle.
What happens if a plant has all of its leaves removed?
You should remove dead leaves for three main reasons:
- to release nutrients and promote growth
- in order to stop the spread of illness or pests
- to enhance one’s beauty and health
A plant’s nutrients are better employed elsewhere when its leaves are dying since they leak them. By removing them, the nutrients can reach the remaining healthy leaves and blooms, where they are most required. Your plant shouldn’t be expending resources to support non-viable leaves.
Cutting off dead leaves from some plants during their active growing season may also promote new development.
Cutting off affected leaves as soon as you can may help stop the disease or pest infestation from spreading to other sections of the plant. Examine any leaves you have removed. Apply treatment very away if you suspect a disease or pest infestation.
Furthermore, indoor plants with brown and dead foliage just don’t look good. They appear sick and ugly. Removing these troublesome leaves enhances the health and beauty of the plant. In some plants, keeping brown leaves can actually hasten the plant’s degeneration.
Can the top of a house plant be removed?
In order to improve fruitfulness and growth, pruning is defined as “trimming (a tree, shrub, or bush) by cutting away dead or excessive branches or stems.”
Pruning plants is a task that everyone can perform occasionally, regardless of how experienced they are with plant care or if they are in charge of an indoor jungle. It benefits your plants in a number of ways, including preventing pests and disease, preventing your plants from becoming overly sparse, and allowing your plants to maintain a form and size appropriate for indoor areas. This journal entry will go over how to correctly trim and shape your plants, why it’s crucial, and several methods you can use for both vines and trees to promote deliberate development.
The Basics
Simple gardening shears or scissors and a basic understanding of how plants function are all that are needed to successfully trim and shape your houseplants.
In most circumstances, pruning and removing leaves, stems, and branches doesn’t hurt your plant. In fact, doing this occasionally is beneficial. During their active growing seasons of spring and summer, plants will benefit most from a good trimming. Both vines and trees can benefit from trimming to promote fresh, fuller growth along the plants as well as to remove any dead or yellowing portions. Pruning is one of the finest ways to get control over how your plant is growing, whether you want to maintain a given size, promote branching, or attain a certain aesthetic.
The majority of indoor plants can be cut and pruned, but others, like most palms and tree ferns, require special care. It is possible to remove dead fronds and leaves, but since these plants don’t branch, cutting off the top growth zones will basically destroy the plant.
Pulling Away Yellow or Brown Leaves
The easiest approach to help prevent any unwanted plant pests from settling on your plant is to trim or pluck away any yellowing or dead leaves. These pests are more attracted to decaying or dead leaves than healthy ones, and they are more likely to develop on a suffering plant.
A smart technique to keep your plant looking its best is to remove yellowing or dead leaves. When a leaf begins to yellow, wait until it has turned completely yellow before removing it. A leaf that is about to fall off completely loses all of its chlorophyll (the molecules that give the leaf its green colour), and the plant absorbs any nutrients that are still present in the yellowing leaf. There should be no resistance encountered when removing the leaf. You can also remove any leaves that have grown crispy and brown off a stem or branch without hurting your plant.
Seasonal vs. Daily Pruning
When it comes to trimming and pruning indoor plants, several chores should be completed at specific periods of the year. Any significant trimming should ideally be done in the spring or summer while your plants are actively growing and receiving more sunshine. The best time to prune huge amounts of leaves, branches, or anything else that will significantly reduce the size of your plant is now. Generally speaking, you don’t want to remove more than 1/4 of the plant’s total foliage. During the fall and winter, postpone any heavy pruning because your plants won’t be growing as quickly and it may take them longer to put forth new growth or recover from being overpruned. There are, however, some jobs that may be completed quickly at any time of the year. To keep your plants looking healthy throughout the year, remove any yellowing or browning leaves, a few extra stems or vines, or other tiny objects as needed.
Pruning Trees
Indoor trees should occasionally be pruned to help maintain their shape and growth, just like trees that are outdoors. Similarly, it’s a good idea to shape and prune them if they are growing too large for your location. A effective approach to thin out trees is to prune them. This not only enhances its aesthetic appeal but also promotes airflow between the leaves and branches, making the plant overall healthier.
Indoor trees like Dracaenas and Ficus have a tendency to grow vertically, but by pruning the topmost point of development, you can encourage branching. By doing this, you’ll make your plant branch out from the edges of the cut rather than allowing it to grow upward as usual. You can control where and how your plant develops by branching out of this concept, allowing you to shape your tree’s growth to fit your indoor environment.
Pruning Vines
Similar to trees, vines can benefit from routine pruning to prevent them from growing too long and to provide a fuller appearance. Regular pruning is very beneficial for some types of philodendrons and vines like Pothos. In addition to removing dead or yellow leaves, pruning may make most vines appear bushier and fuller. To do this, prune just below a leaf or, every so often, pinch off new growth with your fingers to encourage your plant to grow new vining stems from an old one. This keeps your plant looking full and compact rather than having sparse, solitary vines trailing down a planter.
Propagating with Cuttings
Branches, vines, and stems that you have chopped off from your plants may leave you unsure of what to do with them. You may typically propagate your plant by inserting all of its pieces straight into the ground or water. Most branches and plant cuttings, including those from Sansevieria, ZZ plants, Hoyas, and other species, root easily. You should trim a vine like a Pothos, Philodendron, or Monstera just below a node or aerial root. If you bury this piece in soil or water, water or soil roots will develop and support the cutting as it grows.
With all of this knowledge, perhaps you are well-equipped to prune and trim your plants to maintain their appearance of health and happiness (as well as their actual health and happiness!). Feel free to leave a remark below or stop by one of our stores if you have any questions.