the 2nd of July, 2019 – Ashley Johnston 49 Comments
Whatever it is about succulents, I might have a slight addiction to them. Okay, mild isn’t completely accurate because I constantly add them to bookcases, shelves, and other objects. Ha! However, it is only because they are really simple to maintain and essentially match any style of design.
Anyway, the wall divider that separates our dining room from living room has a rather odd cutout that was made by the home’s constructor, and I have no idea what to do with it. I have tried placing a variety of objects in the space, which is tall and rather narrow, but nothing has truly worked. Then, when I realized that this month’s Michaels Maker subject was “DIY Trends,” I began to consider trends that I love and wanted to attempt. I immediately knew what I wanted to try, especially since it contained more SUCCULENTS!
So, yes, a straightforward Rope Plant Hanger that I could keep neat and slim while yet vertically filling the space.
It resembles the macrame plant holders that all of our mothers used to make in the 1970s, but it’s much simpler and has a lot less shag dangling from underneath. Additionally, because it’s not fussy at all, this only takes MINUTES to make. However, it has just enough detail to be attractive to look at.
…and this is it from the opposite side. Such a good fit! And not in the least fussy:
Additionally, it would be quite simple to modify this to your preferences. Make the bottom fringe much longer, use thicker rope, go through with two pieces of rope rather than one, etc. Additionally, you could hang this outside, in a room’s corner, from the ceiling, etc.
SUPPLIES:
- a planter
- Acrylic Color (I used a little bottle of outdoor paint)
- Hemp Rope
- Screw Hook (or another type of wall- or ceiling-mounting hardware)
- Adhesive tape
- potted plant with soil
To hold the ropes in place, keep them equal, and keep them in their ideal positions, add a strip of Scotch tape now.
Next, grab a rope from one set of ropes, then a rope from the next set over, and knot them together in the space between the two higher knots. To reach the next level of knots, continue around the pot in the same manner.
Tape this level of knots in place after gently pulling the ropes to remove any slack.
Depending on the size of your pot, you should add different degrees of knots, but I ultimately needed four. Before you reach the top edge of the pot, the very last level of knots should come to an end, around 1/2 inch away.
Turn your pot over while holding the ends of all your ropes in one hand. Make a knot at the top of your ropes (or wherever you want to hang it from), then check to make sure each rope is the same length and supporting the pot evenly before trimming off any extra. Take the tape off. You can then choose how long you want the rope parts to hang below the pot once it has been hung.
It’s time to attach your rope plant hanger by adding a hook screw (or other hanging hardware) to the wall.
Step 1Cut the rope to size
You will need to cut eight sections of rope into equal lengths in order to make this fashionable yet straightforward rope hanger.
Depending on the particular plant container you have selected, the appropriate length will vary. Generally speaking, the longer your rope needs to be, the bigger the pot. However, you’ll also need to add a bit extra to account for the knots and plenty extra to hang your planter with.
A few inches before the end, secure all eight strands with a tight knot.
Step 2Secure the rope to the base of the pot
Place the knot in the center of the pot after turning it over, and then split the strands into four groups of two. The bottom of the pot will be divided into equal parts as a result.
Small strips of adhesive tape should be used to fix these strands in position. Then, just past the base’s edge, tie a little knot in each group. These knots ought to be apparent once the job is finished and the pot is placed back upright.
Step 3Create the knots
You are now prepared to begin tying the rope plant hanger together. One rope from the first group and one rope from the next group should be taken, and they should be tied together in a knot. Be sure to place this in the middle of the two upper knots. Continue until the first row is finished, traveling all the way around the pot as you go.
Pull the rope very gently to remove any slack, then use a small piece of sticky tape to hold each knot in place. Although the rope will be kept in place by the tape, it will make succeeding rows easier to knot together when it is eventually removed.
Continue by tying the next row of knots in the same manner. Again, the size of your pot will determine how many rows you need. However, we advise leaving a 1/2 inch space between the last row and the top edge for all projects.
Step 4Tie it together and hang
Last but not least, flip the pot over one more and tie the eight rope strands together in a single knot. You can tie the knot at any desired height. Just make sure that all of the ropes are the same length (therefore allowing your pot to hang level). If they are, cut off any extra, and take off all the adhesive tape.
You have a few alternatives for hanging your brand-new macram plant holder. The rope can be hung directly from the screw hook if you like. Alternatively, you could attach the rope to a wooden ring and hang it there for a more tasteful and polished look.
Start making your rope hanging basket today
Ready to begin knotting? Make a chic rope hanging basket for your house or yard by selecting your succulent and stocking up on rope supplies. Also keep in mind that we always like seeing our customers’ creations! We’ll be sure to include some of the best images of the macram plant holders you make using our ropes, strings, and twines on our website and social media pages if you send us some pictures.
To create a plant hanger, how much rope would you need?
Making your own plant hangers in the style of boho chic is stylish and easy with macram, the knotting technique for rope. It’s a trend from the 1970s that has come back, and this time it’s even better. If you love plants, you’ll adore how these hangers will display your plants both indoors and outside.
Making your first DIY macram plant hanger could seem difficult at first, but after learning the fundamentals, it’s really fairly simple! Today, we’ll go over some fundamental knots and patterns that you can use to create a macram plant hanger.
The three fundamental knots we’ll use in the tutorial are as follows:
- Round knot
- Spiral or half-square knot
- Knot loop
If you’d need extra experience with these before you get started, try out this useful instructional on fundamental macram knots. We’ll go through each type of knot in the video.
Materials:
- 8 cotton cords totaling 15 feet in length (3.1mm thick)
- two brass rings
- two 5 foot lengths of rope
Without a rope, how can plants be hung?
It’s so much fun to add some life to your home by hanging houseplants from the walls. The lush green foliage not only makes your space brighter, but hanging them in unique ways can also help give your house a little bit of flare.
There are actually many alternatives to drilling if, like me, you lack the necessary skills. Although I’m one of those persons who would rather never to handle a power tool again, I’ve nevertheless been able to hang over 20 plants in my house (check out my house tour).
So stay right here if you’re looking for the ideal plant hanging method. I’ve put together a list of strategies to make your life simpler. Yes, the topic of this post is how to hang plants without using holes.
How much cord should I use for macrame?
The length of your Macrame cable should typically be four times that of your project. Go for eight times the length after you’ve tied a Lark’s Head Knot to divide your rope into two cords.
It’s critical to consider the pattern when measuring the length of your cord:
- You will probably need more rope if your pattern includes a lot of knots.
- You can shorten the rope if your pattern includes a lot of straight cords.
- The length of the cord must increase with its thickness.
- Three-ply and braided ropes require more length per knot than single-strand cable does.
- Always cut more rope than you think you’ll need if you’re unsure.
- Always account for extra cord when making a fringe.
How do you determine the length of a macrame rope?
The general rule of thumb is to multiply the finished length of your project by 4 to get the length of your cords. At the end, add additional for however much fringe you desire.
You must then multiply the result by two to determine the actual cord length if you plan to fold the cords in half and fasten them to a dowel (for a wall hanging, for example).
This approach isn’t very precise, and you usually have extra cord leftover. However, this is a good option if arithmetic is not your friend.
The shortest piece of extra cord that remains once the project is complete is measured, multiplied by 2, and the sum is deducted from the cord length for future use.
It functions nicely for me and doesn’t cause too much brain damage. I then keep the unused scraps for future endeavors.
Magnet Hook With A Magnetic Hang
You could hang your plants from your ceiling using solid magnetic hooks, depending on the construction of your ceiling. The magnetic hooks have an attached hook and a plate.
The hook should be fastened to a metal ceiling fixture or air vent. Use a loop to suspend your plant over the hook.
Hang Plants From Your Ceiling Using An Adhesive Hook
Utilizing adhesive hooks is the alternative method for suspending plants from the ceiling without harming your roof.
The sticky hooks can be adjusted to the exact size needed for your ceiling. They are available online or at your neighborhood hardware store.
Peel off the adhesive cover from the hook after you have it and adhere the hook’s back to the ceiling. To hang your plant pot from your roof, it should include a hook or string that you can pass over the hook.
For heavy plants, make sure you use stronger hooks to prevent sliding off.
Use Suction Cup Hangers
Does your house have a skylight? Suction cup hangers are your best choice if so.
The cups work best on flat surfaces. Since it leaves no holes in your ceiling, it is safe to use.
Use Tension Rods
Using tension rods would also spare you the trouble of having to drill holes in your ceiling. Typically, curtains, garments, and room dividers are hung on the rods.
On the other hand, you can still hang plants from them. You can hang your planters from two rods vertically on the area where you want to hang them using three rods.
Support a third rod that runs horizontally between the two by using the two as support. To create tension between two rods is the idea.
You hang your pots or air plants, like the Bird’s Nest Fern or String of Pearls, here.
It costs little money and won’t harm your ceiling. Tension rods are available from internet retailers like Amazon.
Check the rods’ weight capacity to make sure they can support the plants after watering for safety’s sake.
The plant pole in the boho style can also be used to suspend plants from the ceiling. This rod works nicely with most pots and hangers.
Use Floating Shelves
In order to provide the planters or pots ample sunlight, hang them in front of a window.
To prevent drilling your ceiling, you might combine this with an adhesive or magnetic hook.
Macrame Plant Holders
You may also use macrame plant hangers to hang plants from your ceiling. Your hanging plant will be held in place by the loop that you pass over their hooks.
Macrame plant stands offer your area an anti-gravity sense and guard against rodents eating your plants.
Clothing Rack Vertical Garden
Using a clothing rack as a vertical garden is another solution you could consider if you want to avoid making holes in your lovely ceiling. Plant pots should be hung on the rack’s top pole.
It’s a clever method to exhibit a lovely array of plants on your garment rack.
Use Wall Mounted Hooks With A Command Strip
To hang your plants, you could use a command strip and a wooden hook fixed on the wall. These plants might be housed in a planter or a basket.
S-Hooks
If there is a place to hang them, S-hooks are perfect for hanging your plants from anywhere in your home. That can be on your wall’s slab or a tension rod.
Shelf-Planting
Instead of drilling into your ceiling, why not use a shelf planter. To easily put your plants, use a large shelf you already have in your home or buy one.
While keeping the house organized, a high shelf makes space for hanging your plants.
Use A Coat Rack
To keep your ceiling’s sparkle, you need to think outside the box. You might want to consider using a coat rack.
It hangs your plants beautifully and prevents you from having to make holes.
Use planters with loops to hang them on the coat rack after buying one from an area store or Amazon.
Sturdy Decorative Branches
If you have any solid decorative branches nearby, this is a fantastic alternative. Since you want to make your living room as pleasant as possible, you must be very picky.
Create the appearance of boho home decor by stringing the branches together.
Employ Clamps As Hooks
You are aware of the holding and fastening capabilities of a clamp. If you have a space in your attic or living room, such as the edge of a mid-running wall, it’s a great option.