Get an approximate measurement of the length of the macrame hanging plant holder first (i.e., how far down you want it to hang). For extra assurance that it won’t be too short, add an additional 12 inches to this dimension. Cut eight cording strands that are equal at this length.
Align one end of each of the eight pieces, then knot the ends (as shown in the photo below). This will be the plant holder’s bottom tassel.
Measure the height of the pot or globe you want to hang from the macrame holder as well while you’re using the measuring tape. Add one inch, subtract it, then divide the result by two. As a result, you can roughly predict how far apart your knots will be in the following steps.
Tie the First Row of Knots
Spread out the four groups of two cords each from the eight cording pieces (as shown in the photo below). Each set should be tied off by about one inch from the tassel knot. At this time, it will resemble a flower somewhat.
Tie the Second Row of Knots
The distance between your knots should then be determined using the measurement you performed in step 1. Take the left chord from one set of cording, take the right cord from the set that is directly to its left, and tie them together, spacing the knot from the first row of knots according to your measurement. For the remaining three sets of cording, repeat this procedure.
Tie the Third Row of Knots
To tie a third row of knots, repeat the procedure you did for the second row. You should now detect a flower-like shape inside a square.
Place Your Pot or Globe Into the Plant Holder
Place your pot or globe on top of the cording after tying the third row of knots so the tassel is centered on the bottom of the container. Bring up all four sets of cording at that point. If required, adjust the container so that it hangs straight and the cords are positioned around it fairly evenly.
Hang Your Macrame Plant Holder
Your new macrame plant stand can be hung from a bracket or ceiling hook. Fresh flowers, succulents, air plants, or even a candle can be placed inside the container.
How are trailing hanging baskets made?
This attractive summer hanging basket with an orange theme is simple to build and includes diascia, fuchsia, and heuchera. To make things even simpler, use a coir basket that has already been formed. Whichever plants you select, as long as there are some to fill the center and some trailing plants to gently cascade over the sides, doesn’t really matter.
You Will Need
- Sweet Caroline Ipomoea (1)
- ‘Million Bells Cherry’ Calibrachoa (3)
- Tesco Purple Osteospermum (1)
- D. “Red Ace” Diascia (6)
- grass clippings, 36 cm metalware basket
- Peat-free, all-purpose compost
- Fertilizer with a slow release
Step 1
Place a pail on top of the basket, then fill it with wet grass clippings. An alternative is to purchase a pre-formed coir basket. Include a layer of plastic inside this to help preserve moisture.
Step 5
Prior to hanging the basket in its final location, give your plants a good watering and allow them to drain.
When it’s hot, dry, or windy, don’t forget to water your baskets at least once a day, if not more frequently.
What alternative to a hanging basket is there?
Use wicker baskets or little buckets instead of conventional hanging baskets to hang your plants. Before putting the plant in the wicker basket, pot it in another container. Drill drainage holes in the bottom of plastic buckets and paint or decorate the exterior as desired.
Are homemade hanging basket liners possible?
We are searching for our hanging baskets in the back of the garden shed in the late spring. We may begin the task of planting up once everything has been brushed off and untangled. But hold on! No lining for hanging baskets! What a hassle.
Wire baskets can be neatly and easily lined with hanging basket liners, but after their first year, they are either lost, tattered, or thrown away with the last season’s decorations. The majority of us are in no hurry to get new liners. The garden shop will instead list all the ways you can line your own hanging basket with supplies you already have at home.
A hanging basket liner’s only responsibility is to keep all the items inside the basket. Because they keep the soil and water in place while allowing for some drainage, enabling the roots to breathe, and having the potential to be thorny if you want to put a plant out the side, moss liners are extremely popular these days.
A straightforward liner can be created using plastic baggies. Just sling a bag into the basket. Compost should be placed within the basket, and the plastic bag liner should be cut to suit the basket’s rim. The plastic liner should then have many holes made in it to allow for drainage.
A moss-based basket lining would be more aesthetically pleasing and good for plants. You would need to gather moss from your garden to accomplish this. This is a simple task—all you need to do is scarify a portion of your lawn with a wire rake, and you’ll have more than enough moss to work with. Each hanging basket will require a thick layer of moss lining, so gather a bucketful for each basket.
Make sure the moss is completely submerged in water by soaking it for a few minutes. The water may then be squeezed out, and you can start filling the wire basket from the bottom and work your way up. To stop dirt from leaking through the wire basket, ensure that there is a thick layer of moss covering it.
Following that, you may start adding soil and compost to the basket. Use caution when moving or lifting the basket because it may be very heavy due to the moist moss, dirt, and plants. Before hanging your basket, make sure the hanging basket bracket is reliable and securely fastened.
This DIY moss liner is inexpensive, quick, and simple to install. The finest growing conditions for your garden plants can be achieved using it as well. Your basket will have adequate drainage and natural air flow to keep the roots of your plants happy at all times. Make sure to water the baskets every other day because the moss liner will dry out more quickly than the plastic bag liners.