Generally speaking, hanging plants cost more than their plain, potted counterparts. Make your own potted plant hangers from spare yarn scraps. Because yarn is available in so many different shades, tones, and textures, it’s simple to match your plant hangers to the furnishings in any room of your house. Simple knots can be used to make a strong, useful, and lovely item of home décor.
For this project, go with a thick, bulky-weight yarn. The best fibers for ordinary wear and tear are synthetic fibers, such acrylic. Wool may warp in the presence of water and friction, and cotton loses its elasticity with time.
- Generally speaking, hanging plants cost more than their basic, potted counterparts.
- Simple knots can be used to make a strong, useful, and lovely item of home décor.
The length of your plant hanger should be measured. This is the distance between the bottom of the plant’s pot and the hook from which you will hang the plant.
Add five times to this measurement. Cut six pieces of bulky-weight yarn to this measurement. You would need six lengths of yarn that are each five feet long to make a one foot plant hanger.
The yarn bits are folded in half. A sizable metal O-ring should be moved across the yarn strands until it reaches the center fold. Use a hitch or slip knot to tie the yarn beneath the ring to keep it in place.
- The length of your plant hanger should be measured.
- A sizable metal O-ring should be moved across the yarn strands until it reaches the center fold.
Heavy duty yarn should be divided into strands. There should be twelve given that they are folded in half. Make three groupings of four strands out of the strands.
Use a bulldog clip to secure the metal ring. A safe surface, like the edge of a desk, table, or couch, is ideal for mounting the bulldog clip.
Choose a single quartet of strands. This group should be tied off from the other yarn strands using an overhand knot to keep it together.
Heavy duty yarn should be divided into strands.
Using two strands held together as one, tie two square knots with the yarn fragments in the clipped group. The knots should be positioned such that they meet the top edge of the flower pot. Avoid tightening the square knots; they should be firm but loose enough to allow you to still see the pattern of the knots’ construction.
Use two strands that are held together as one to tie two square knots in each of the remaining four-strand groups. Place these knots so that they meet the top edge of your flower pot. You should be able to see the design of the knots if you don’t tug too hard on the knots. The yarn should now be divided into three portions, each with one overhand knot and two square knots.
- Using two strands held together as one, tie two square knots with the yarn fragments in the clipped group.
To the bottom of the flower pot, weave all of the yarn strands, interlacing and adding knots as you see fit. Any additional knots you tie in the yarn strands are just ornamental; they are not necessary. Put a square knot or hitch knot on each of the strands and secure them at the base of the pot.
The yarn strands’ ends should be carefully cut or left hanging to create a stylish tassel.
To add glitz and glamour to your yarn plant hangers, string beads onto the strands of yarn before knotting.
Create a crochet chain for each initial strand of yarn if you are skilled in the chain stitch of crochet to add a more twisted, beautiful touch.
Make mistakes or explore with knots without fear. Knots are always reversible. As you make your plant hangers, take some time to experiment with the yarn.
How do you use string to build a macrame plant hanger?
- Tie a loop knot directly beneath the ring with your 5-foot-long piece of thread.
- Make a square knot with four strands. 6) Repetition.
- With the following quartet of four chords, repeat this process, then do the same with the remaining cords.
- Make a half square knot and leave a 2 1/2 inch space.
- Continue until you have a 5 inch spiral.
- To tie the remaining knot groups, repeat this technique.
- Use the two right cords from the first group and the two left cords from the adjacent group to tie a crossover square knot across the gap, which should be 6 inches wide.
- Do the same with the remaining knot groupings.
- By alternating the cords from the prior stage, make another crossover square knot with a 6-inch gap.
- Make a loop knot and leave a 3 1/2 inch space.
- To complete the cord with a tassel, trim the extra cord.
Is yarn acceptable for a macramé plant hanger?
The Macram Hanging Basket Kit is ideal for making a macram plant hanger that is both elegant and natural-looking. It comes with natural jute yarn in a rich cinnamon taupe color, ideal for any decor.
Can you do macrame using regular yarn?
The tiniest things occasionally have the power to confound us. Like, why are there so many names for this stuff when it largely looks the same? To mention a few, there are rope, string, thread, cord, yarn, twine, floss, and ribbon.
These are a some of the terms that are frequently used to describe the strands used in fiber crafts. And the material shape that your fiber will take will depend on the precise craft that you pursue. Here, the craft of macram will be the main focus. To make macram, you often use rope, thread, cable, and, to a lesser extent, yarn.
Yarn:
In order to weave and knit fabric, yarn is a continuous, frequently plied strand formed of either natural or synthetic fibers or filaments (Merriam Webster). The craft for which it is used determines how yarn is defined.
Ribbon may be used for weaving, and our 2mm knitting string (which we highly suggest!) could be used for knitting. However, when same materials are utilized for crafts that result in cloth, they are typically referred to as yarn. Though it is frequently assumed that yarn is solely made of wool, yarn can actually be produced of any fiber.
Rope:
The difference between rope and string is that rope is plied, which means that each rope is made up of bundles of several strings that are twisted or occasionally braided to produce the rope. That is the distinction! One is plied, but both are twisted. Rope has a distinct texture, is typically made of a firmer material, and has a larger knot.
Our cotton rope is available in 3mm, 5mm, and 12mm sizes with a wide range of attractive, contemporary hues.
String:
In order to “bind, fasten, or tie,” a string is a twisted bundle of fibers (American Heritage). Once more, the intended use of a thing determines its purpose. And you can sure it will work for macram if it is made for tying! Due to its unplied nature and low profile knot, string has a tendency to be softer and more flexible than rope.
Our cotton string is available in three various diameters: 2mm, 4mm, and 9mm. It is the perfect material for a wide range of crafts, no matter how big or tiny.
Cord:
When reading a macram pattern, you will regularly run into this phrase. We interchangeably refer to rope, string, and yarn as “cord.” It’s all-inclusive! Consider all of your working lengths as cords if you are knotting.
You should be able to converse more fluently in the language of your trade now that you are aware of the distinctions between these dynamic materials. You might also discover that it’s simpler to find supplies and decide which fiber format is best for your project. Hopefully, this clarity will inspire you to confidently investigate rope, string, and yarn’s numerous applications.
How are rope plant holders made?
The time has come. The first DIY video by Lovely Indeed. Those of you who are very committed may recall a few embarrassing attempts at video lectures from the past. I’ve certainly learnt a lot since then, and things are only going to get better. I owe a lot of gratitude to Bri and Angela at Video Blogshop for imparting their vast expertise of video editing to me. Now let’s get DIY-ing!
For those of you who enjoy reading:
- Each piece of string should be 72 inches long.
- Together, fold each one in half, then knot the closed end.
- Pair up, then 15 inches away from the huge knot, tie each pair together.
- Five inches from the previous knot, take one piece from each pair and knot them together.
- Knot the two outside strands after the interior pairs are finished.
- Knot all of the threads together once more around two inches below the previous knots.
- Enjoy after carefully placing your plant in the hanger!
I hope you enjoyed the opening video! There will be many more, hopefully each one cooler than the previous. Watch out for the details on how to make those gold and white flower pots the following week as well! xoxo
What alternative to a hanging basket is there?
Use wicker baskets or little buckets instead of conventional hanging baskets to hang your plants. Before putting the plant in the wicker basket, pot it in another container. Drill drainage holes in the bottom of plastic buckets and paint or decorate the exterior as desired.
Which yarn works best for macrame?
For macrame, a variety of materials can be used. You should simply consider how easy it will be to work with a particular sort of thread before using it for your upcoming macrame project. Beyond that, the choice of what materials you think would look decent is ultimately simply up to you.
Cotton rope or cord is the material that is most frequently used in macrame. It has the timeless white or off-white appearance that so many people appreciate. A three-strand cord has a lot of strength, making it ideal for macramé items that support weight, such as plant hangers, bookcases, and swings. On the other hand, delicate items with loads of detail, like flowers and dreamcatchers, work best with single-strand macrame cable.
because working with thin or fragile strands is made easier without the usage of delicate tools like needles when doing macrame. Be sure you can tie the knots before choosing a material for your next macrame project. You will find it difficult to tie the knots effectively and the design you’ve chosen will seem sloppy and uneven if the fabric is too thin or frays too easily.
There is no set thickness for macrame material because each person has a different set of hands and varying degrees of dexterity and expertise. Additionally, each person has slightly varied tastes. Some folks have a mid-century modern vibe, while others are more boho chic. Therefore, you have complete freedom over the type and thickness of macrame material. If you like it and think you can work with it, go for it! It’s not for you if you think it looks ugly or if your fingers can’t fit in it.
What alternative to macrame cord is there?
Selecting the appropriate fiber is a crucial initial step when starting a new project. Because there are so many alternatives, this process may be really exciting and fun, but it can also be a little daunting if you don’t know where to start, so let’s break it down a little.
Whether you’re looking for yarn, rope, cord, or another type of fabric, you should choose between working with natural or synthetic fibers.
Natural fibers are perfect for interior projects, home décor, jewelry, accessories, gift wrapping, and textiles. They include cotton, linen, jute, wool, and hemp. They are an excellent environmentally friendly solution for creating because they are also biodegradable.
Polypropylene, acrylic, nylon, and plastic are examples of synthetic fibers. They are perfect for outdoor projects because they hold up well in rain or shine and won’t degrade over time with the weather.
Rope comes in a wide range of sizes and diameters, some of which are better suited for particular projects than others.
Ropes that are 3mm in diameter or less are ideal for jewelry-making and other small-scale or delicate crafts. Here are some of our favorite projects that utilize wires with smaller diameters.
The most popular rope size is probably the medium rope, which comes in sizes 4mm to 7mm. It’s ideal for macram novices, is more durable than the smaller ropes, and is the right size for things like plant hangers, wall hangings, furniture, lanterns, curtains, and rugs.
In particular for wall hangings like our Columns and Arches Wall Hanging, large ropes, 8mm-12mm (and greater), create a statement and are so much fun to work with. Because of their size, they can be a little more difficult to deal with, but the effort is worthwhile.
Texture:
Since you may add interest to a work by including some exciting fiber with texture, texture is a crucial feature to consider visually.
If you’re knotting up something large, you might also want to think about how the fiber feels to work with. Jute, for example, looks fantastic but can be a little scratchy on the hands. But don’t worry, gloves are a great method to protect your hands when dealing with a fiber with a rough texture.
If you’d want to learn more about the different fibers we currently offer, including Cotton, Jute, Felted Wool, Polypropylene, rope, and string, keep reading.
Our cotton rope comes in a variety of sizes, including 3mm 2-ply, which is great for lighter, softer, more delicate projects, 5mm 3-ply, which we use for all of our workshops and which we advise beginners to use, 6mm 2-ply, which is a great option made from recycled cotton, 12mm 3-ply, which is great for large-scale or bulky projects, and a variety of large diameter statement piece fibers in 16mm, 20mm, 24mm, and 30mm.
Our cotton thread, which comes in thicknesses of 2mm, 4mm, 9mm, and 12mm, is wonderfully soft, knots up beautifully and practically effortlessly.
Jute is a strong, natural material with appealing color and texture. Although it is coarse and scratchy, it is a good, practical fabric that looks wonderful when knotted. 6mm 1-ply Jute Rope is a size that we provide.
Fun, voluminous, and soft statement fiber is FELTED WOOL. Use it to create a plush and beautiful rug or give a rope wall hanging some woolly flair. We offer our felted wool in approximately 8mm 1-ply.
POLYPROPYLENE is a strong, resilient rope that can withstand the outdoors, making it a fantastic option for outdoor projects. We have 12mm braided polypropylene rope available.
Measure out your yarn and tie them together
For eight pieces of yarn, you should measure out around 34 feet. Although I realize this is extremely ambiguous, it will actually depend on where you plan to place your macrame hanging planters. You could want to extend them far further than I’ve suggested or add additional lengths as I did.
Make a square knot with the first two strands of yarn
Two inches from your knot, untwist two strands of yarn and tie a square knot by crossing the right and left strands of yarn over the other.
After that, repeat the process with the following two strands. Continue doing this with the remaining threads.
Create a square knot using two different strands of yarn
You should follow Stage 3’s instructions exactly for this step, with the exception that the two strands of yarn you use will be completely different from one another when you tie the knot.
About 2-3 inches from the previous knot, tie this knot. With the remaining sets of strands, repeat this procedure.
Repeat Step 5 with alternate strands of yarn
Now, using alternating strands of yarn, tie some more square knots. Maintain their separation so you can see every knot.
Tie them all together at the end
You should tie all of your strands together at the very end of your macrame plant hanger, but leave yourself about three inches for a tassel.
Was that not simple? and amusing? Once you finish your first one, this project becomes quite addictive. When I say that I have them all over my house, I’m not joking!