Directions
1. After selecting a lovely yarn or yarns, the first thing you should do is cut eight 94-inch lengths. Use macrame rope instead of a single rainbow yarn if you choose, or mix different colors evenly throughout the eight sections as I did. To add some color to my glass planter, I chose vivid rainbow yarn.
2. After that, collect every bit of yarn and fold it in half.
3. With them on the fold, make a tight knot to create a loop for hanging your planter.
4. To make the remaining steps easier, hang your loop from a doorknob, hook, or nail.
5. Gather two yarn strings that are directly across from one another and knot them 8–12 down from the initial knot to start your macrame knots. Depending on the size of the pot you are creating it for, this length will change. You want to be able to fit it between the area where these knots will lay on the top of your pot. Keep your knots as evenly spaced from the main knot as you can as you continue to knot 2 pieces together until you have 4 knotted portions.
6. Tie 1 string from the part next to each knot together with 1 strand that is gathered 3–4 inches below the knot. Once more, go around and attach each thread.
7. Insert your pot through the bottom to determine the location of your final row of macrame knots. To keep it safely inside the pot when hanging, this knot should be placed about two up from the bottom.
8.Repeat step 6 to tie your final knots, gathering one string from each piece and tying it to one string from the following section.
9. After gathering all of your yarn strings, create a big knot on the bottom three stitches beneath your previous one. This is where your pot will rest. Leave a nice-sized tassel by trimming any extra or irregular ends.
10. Add dirt and a plant to your pot, if you haven’t previously.
11. Insert the pot through the top’s larger opening, then hang. Enjoy your homemade yarn macrame plant hanger now!
You may wish to knot the top again, once or multiple times, depending on where you plan to hang your pot and how far you want it to dangle. I tied the top right over the original twice more once mine was finished. I enjoyed how it gave the knot a little more weight.
There are Amazon affiliate links in this article. For further details, please visit our Disclosure Page. We appreciate your support of our website.
Describe Jody I am a true Florida native who loves the semi-rural, small town lifestyle. With the help of my wonderful husband, two adorable children, two of the best Dachshunds to ever walk the earth, copious amounts of coffee, and a lot of Jesus, I’m making my way through it. I homeschool, do crafts, cook, scrapbook, garden, rummage through secondhand stores, take thousands of photos, and read whenever I have a moment to spare (which is rare). My blog is at Simply Southern Sunshine, where you may find it.
Can yarn be used to build plant hangers?
Generally speaking, hanging plants cost more than their basic, potted counterparts. Make your own potted plant hangers from spare yarn scraps. Because yarn is available in so many different shades, tones, and textures, it’s simple to match your plant hangers to the furnishings in any room of your house. Simple knots can be used to make a strong, useful, and lovely item of home décor.
For this project, go with a thick, bulky-weight yarn. The best fibers for ordinary wear and tear are synthetic fibers, such acrylic. Wool may warp in the presence of water and friction, and cotton loses its elasticity with time.
- Generally speaking, hanging plants cost more than their basic, potted counterparts.
- Simple knots can be used to make a strong, useful, and lovely item of home décor.
The length of your plant hanger should be measured. This is the distance between the bottom of the plant’s pot and the hook from which you will hang the plant.
Add five times to this measurement. To this size, cut six pieces of bulky-weight yarn. You would need six lengths of yarn that are each five feet long to make a one foot plant hanger.
The yarn bits are folded in half. A sizable metal O-ring should be moved across the yarn strands until it reaches the center fold. Use a hitch or slip knot to tie the yarn beneath the ring to keep it in place.
- The length of your plant hanger should be measured.
- A sizable metal O-ring should be moved across the yarn strands until it reaches the center fold.
Heavy duty yarn should be divided into strands. There should be twelve given that they are folded in half. Make three groupings of four strands out of the strands.
Use a bulldog clip to secure the metal ring. A safe surface, like the edge of a desk, table, or couch, is ideal for mounting the bulldog clip.
Choose a single quartet of strands. This group should be tied off from the other yarn strands using an overhand knot to keep it together.
Heavy duty yarn should be divided into strands.
Using two strands held together as one, tie two square knots with the yarn fragments in the clipped group. The knots should be positioned such that they meet the top edge of the flower pot. Avoid tightening the square knots; they should be firm but loose enough to allow you to still see the pattern of the knots’ construction.
Use two strands that are held together as one to tie two square knots in each of the remaining four-strand groups. Place these knots so that they meet the top edge of your flower pot. You should be able to see the design of the knots if you don’t tug too hard on the knots. The yarn should now be divided into three portions, each with one overhand knot and two square knots.
- Using two strands held together as one, tie two square knots with the yarn fragments in the clipped group.
To the bottom of the flower pot, weave all of the yarn strands, interlacing and adding knots as you see fit. Any additional knots you tie in the yarn strands are just ornamental; they are not necessary. Put a square knot or hitch knot on each of the strands and secure them at the base of the pot.
The yarn strands’ ends should be carefully cut or left hanging to create a stylish tassel.
To add glitz and glamour to your yarn plant hangers, string beads onto the strands of yarn before knotting.
Create a crochet chain for each initial strand of yarn if you are skilled in the chain stitch of crochet to add a more twisted, beautiful touch.
Make mistakes or explore with knots without fear. Knots are always reversible. As you make your plant hangers, take some time to experiment with the yarn.
Step 1Cut the rope to size
You will need to cut eight sections of rope into equal lengths in order to make this fashionable yet straightforward rope hanger.
Depending on the particular plant container you have selected, the appropriate length will vary. Generally speaking, the longer your rope needs to be, the bigger the pot. However, you’ll also need to add a bit extra to account for the knots and plenty extra to hang your planter with.
A few inches before the end, secure all eight strands with a tight knot.
Step 2Secure the rope to the base of the pot
Place the knot in the center of the pot after turning it over, and then split the strands into four groups of two. The bottom of the pot will be divided into equal parts as a result.
Small strips of adhesive tape should be used to fix these strands in position. Then, just past the base’s edge, tie a little knot in each group. These knots ought to be apparent once the job is finished and the pot is placed back upright.
Step 3Create the knots
You are now prepared to begin tying the rope plant hanger together. One rope from the first group and one rope from the next group should be taken, and they should be tied together in a knot. Be sure to place this in the middle of the two upper knots. Continue until the first row is finished, traveling all the way around the pot as you go.
Pull the rope very gently to remove any slack, then use a small piece of sticky tape to hold each knot in place. Although the rope will be kept in place by the tape, it will make succeeding rows easier to knot together when it is eventually removed.
Continue by tying the next row of knots in the same manner. Again, the size of your pot will determine how many rows you need. However, we advise leaving a 1/2 inch space between the last row and the top edge for all projects.
Step 4Tie it together and hang
Last but not least, flip the pot over one more and tie the eight rope strands together in a single knot. You can tie the knot at any desired height. Just make sure that all of the ropes are the same length (therefore allowing your pot to hang level). If they are, cut off any extra, and take off all the adhesive tape.
You have a few alternatives for hanging your brand-new macram plant holder. The rope can be hung directly from the screw hook if you like. Alternatively, you could attach the rope to a wooden ring and hang it there for a more tasteful and polished look.
Start making your rope hanging basket today
Ready to begin knotting? Make a chic rope hanging basket for your house or yard by selecting your succulent and stocking up on rope supplies. Also keep in mind that we always like seeing our customers’ creations! We’ll be sure to include some of the best images of the macram plant holders you make using our ropes, strings, and twines on our website and social media pages if you send us some pictures.
Can yarn be used in place of macrame?
Macrame cord is the term for the yarn used in the craft. You can use a variety of materials, including cotton twine, hemp, leather, or yarn.
Can you do macrame using regular yarn?
The tiniest things occasionally have the power to confound us. Like, why are there so many names for this stuff when it largely looks the same? To mention a few, there are rope, string, thread, cord, yarn, twine, floss, and ribbon.
These are a some of the terms that are frequently used to describe the strands used in fiber crafts. And the material shape that your fiber will take will depend on the precise craft that you pursue. Here, the craft of macram will be the main focus. To make macram, you often use rope, thread, cable, and, to a lesser extent, yarn.
Yarn:
In order to weave and knit fabric, yarn is a continuous, frequently plied strand formed of either natural or synthetic fibers or filaments (Merriam Webster). The craft for which it is used determines how yarn is defined.
Ribbon may be used for weaving, and our 2mm knitting string (which we highly suggest!) could be used for knitting. However, when same materials are utilized for crafts that result in cloth, they are typically referred to as yarn. Though it is frequently assumed that yarn is solely made of wool, yarn can actually be produced of any fiber.
Rope:
The difference between rope and string is that rope is plied, which means that each rope is made up of bundles of several strings that are twisted or occasionally braided to produce the rope. That is the distinction! One is plied, but both are twisted. Rope has a distinct texture, is typically made of a firmer material, and has a larger knot.
Our cotton rope is available in 3mm, 5mm, and 12mm sizes with a wide range of attractive, contemporary hues.
String:
In order to “bind, fasten, or tie,” a string is a twisted bundle of fibers (American Heritage). Once more, the intended use of a thing determines its purpose. And you can sure it will work for macram if it is made for tying! Due to its unplied nature and low profile knot, string has a tendency to be softer and more flexible than rope.
Our cotton string is available in three various diameters: 2mm, 4mm, and 9mm. It is the perfect material for a wide range of crafts, no matter how big or tiny.
Cord:
When reading a macram pattern, you will regularly run into this phrase. We interchangeably refer to rope, string, and yarn as “cord.” It’s all-inclusive! Consider all of your working lengths as cords if you are knotting.
You should be able to converse more fluently in the language of your trade now that you are aware of the distinctions between these dynamic materials. You might also discover that it’s simpler to find supplies and decide which fiber format is best for your project. Hopefully, this clarity will inspire you to confidently investigate rope, string, and yarn’s numerous applications.
How are string plant hangers made?
The time has come. The first DIY video by Lovely Indeed. Those of you who are very committed may recall a few embarrassing attempts at video lectures from the past. I’ve certainly learnt a lot since then, and things are only going to get better. I owe a lot of gratitude to Bri and Angela at Video Blogshop for imparting their vast expertise of video editing to me. Now let’s get DIY-ing!
For those of you who enjoy reading:
- Each piece of string should be 72 inches long.
- Together, fold each one in half, then knot the closed end.
- Pair up, then 15 inches away from the huge knot, tie each pair together.
- Five inches from the previous knot, take one piece from each pair and knot them together.
- Knot the two outside strands after the interior pairs are finished.
- Knot all of the threads together once more around two inches below the previous knots.
- Enjoy after carefully placing your plant in the hanger!
I hope you enjoyed the opening video! There will be many more, hopefully each one cooler than the previous. Watch out for the details on how to make those gold and white flower pots the following week as well! xoxo