- The location where you want your planter to hang should be marked. Think about the amount of light the plant you wish to hang there needs. Additionally, be sure to space the holes appropriately if you’re hanging multiple plants in the same location.
- Using the drill bit, create a pilot hole. Make sure your bit is just a little bit smaller than the hook’s screw. This guarantees a tight fit for the hook.
- Put the anchor onto the bolt of the hook such that the wings fold inward if your hook kit contains metal toggles that are spring-loaded. As you insert the bolt into the ceiling, hold the wings together and turn it until the wings open and the hook is fastened.
- Suspend your plant! You can purchase extenders at any garden supply store if the rope or wire on your planter isn’t long enough.
What does a hanging plant require?
A hanging basket is a simple DIY project that only needs a few simple tools, all of which are available at your neighborhood hardware shop. A hanging basket can be set up in a few easy steps.
- 1. Put your supplies together. Ceiling hooks (curved swag hooks work best), a hinged clip, hanging chain, and a drill bit the suitable size (5/8-inch is ideal for most ceiling hooks) are all things you’ll need. The actual potted plant itself is also necessary.
- 2. Select the proper position. A sturdy wood stud, such as a ceiling joist, is the best place to install indoor hanging plants. If you have a stud finder, you can use it to discover the nearest joist. If a stud is not easily accessible, you may also hang a planter from a ceiling pot if you use a swag hook with a hinged clip that pops open after you push it through the drywall.
- 3. Make a ceiling hole with a drill. Press the drill firmly into the ceiling using the 5/8-inch drill bit. When drilling into a solid stud, the procedure is simple. You’ll need to enlarge your hole to accommodate the hinged clip if you’re drilling into sheetrock that doesn’t have a stud behind it. Make sure you’re installing the clip in the proper location because it will expand once it passes through the drywall, making it challenging to remove without damaging the ceiling.
- 4. Put the hook in. Screw the swag hook into the hole you pre-drilled for solid wood installation. To install into drywall, insert your hook into the hinged clip and drive the entire device into the ceiling until the clip enlarges and firmly holds in place. The base of the swag hook should ideally conceal the hole you drilled to accommodate the clip. You’ll need to fix the ceiling if not.
- 5. Suspend the plant. You are now prepared to hang your plant after installing your hanging pot holder. There are a variety of designs available (including heavy-duty chain hangers, twine hangers, shelf-type plant hangers, and handmade macrame plant hangers), so be sure to pick one that both holds your plant pot effectively and complements the style of your area.
Living areas, dining rooms, bedrooms, and kitchens all work well with hanging plants. By fastening the hook to a trellis or porch overhang, hangers can also be used for outside plants.
How can a plant be hung without using a drill?
To hold keys or culinary utensils, self-adhesive foam-backed hooks are frequently used on walls. Plants can also be hung from the ceiling without drilling using adhesive hooks.
Adhesive hooks can support up to one pound of weight as long as the surface is clean and smooth. The advantage is that adhesive hooks can be placed wherever you like.
Make sure the hooks you buy will retain an item without sliding off when the hook is turned 90 degrees because the majority of adhesive hooks are made for walls.
Magnet Hook With A Magnetic Hang
You could hang your plants from your ceiling using solid magnetic hooks, depending on the construction of your ceiling. The magnetic hooks have an attached hook and a plate.
The hook should be fastened to a metal ceiling fixture or air vent. Use a loop to suspend your plant over the hook.
Hang Plants From Your Ceiling Using An Adhesive Hook
Utilizing adhesive hooks is the alternative method for suspending plants from the ceiling without harming your roof.
The sticky hooks can be adjusted to the exact size needed for your ceiling. They are available online or at your neighborhood hardware store.
Peel off the adhesive cover from the hook after you have it and adhere the hook’s back to the ceiling. To hang your plant pot from your roof, it should include a hook or string that you can pass over the hook.
For heavy plants, make sure you use stronger hooks to prevent sliding off.
Use Suction Cup Hangers
Does your house have a skylight? Suction cup hangers are your best choice if so.
The cups work best on flat surfaces. Since it leaves no holes in your ceiling, it is safe to use.
Use Tension Rods
Using tension rods would also spare you the trouble of having to drill holes in your ceiling. Typically, curtains, garments, and room dividers are hung on the rods.
On the other hand, you can still hang plants from them. You can hang your planters from two rods vertically on the area where you want to hang them using three rods.
Support a third rod that runs horizontally between the two by using the two as support. To create tension between two rods is the idea.
You hang your pots or air plants, like the Bird’s Nest Fern or String of Pearls, here.
It costs little money and won’t harm your ceiling. Tension rods are available from internet retailers like Amazon.
Check the rods’ weight capacity to make sure they can support the plants after watering for safety’s sake.
The plant pole in the boho style can also be used to suspend plants from the ceiling. This rod works nicely with most pots and hangers.
Use Floating Shelves
In order to provide the planters or pots ample sunlight, hang them in front of a window.
To prevent drilling your ceiling, you might combine this with an adhesive or magnetic hook.
Macrame Plant Holders
You may also use macrame plant hangers to hang plants from your ceiling. Your hanging plant will be held in place by the loop that you pass over their hooks.
Macrame plant stands offer your area an anti-gravity sense and guard against rodents eating your plants.
Clothing Rack Vertical Garden
Using a clothing rack as a vertical garden is another solution you could consider if you want to avoid making holes in your lovely ceiling. Plant pots should be hung on the rack’s top pole.
It’s a clever method to exhibit a lovely array of plants on your garment rack.
Use Wall Mounted Hooks With A Command Strip
To hang your plants, you could use a command strip and a wooden hook fixed on the wall. These plants might be housed in a planter or a basket.
S-Hooks
If there is a place to hang them, S-hooks are perfect for hanging your plants from anywhere in your home. That can be on your wall’s slab or a tension rod.
Shelf-Planting
Instead of drilling into your ceiling, why not use a shelf planter. To easily put your plants, use a large shelf you already have in your home or buy one.
While keeping the house organized, a high shelf makes space for hanging your plants.
Use A Coat Rack
To keep your ceiling’s sparkle, you need to think outside the box. You might want to consider using a coat rack.
It hangs your plants beautifully and prevents you from having to make holes.
Use planters with loops to hang them on the coat rack after buying one from an area store or Amazon.
Sturdy Decorative Branches
If you have any solid decorative branches nearby, this is a fantastic alternative. Since you want to make your living room as pleasant as possible, you must be very picky.
Create the appearance of boho home decor by stringing the branches together.
Employ Clamps As Hooks
You are aware of the holding and fastening capabilities of a clamp. If you have a space in your attic or living room, such as the edge of a mid-running wall, it’s a great option.
Should plants that are hung have drainage?
It can be challenging to maintain healthy, flourishing, and attractive indoor hanging plants. It can be simple to forget your indoor plants’ demands or fall into the “over-watering” or “under-watering” trap when you have a busy family and job.
It’s crucial to give your indoor plants the ideal environment for growth and success. You may be wondering whether hanging plants require drainage to remain healthy.
We’ll cover everything you need to know about caring for indoor hanging plants in our informative article so they can keep making your home or workplace feel like a tranquil haven.
The majority of indoor hanging plants require good drainage. For them to survive and develop, this is crucial. A pot’s base should not collect water because this might lead to the growth of bacteria, fungi, and root rot.
Now that we’ve covered that quick takeaway, let’s move on to learning why indoor hanging plants require drainage.
Step 1Cut the rope to size
You will need to cut eight sections of rope into equal lengths in order to make this fashionable yet straightforward rope hanger.
Depending on the particular plant container you have selected, the appropriate length will vary. Generally speaking, the longer your rope needs to be, the bigger the pot. However, you’ll also need to add a bit extra to account for the knots and plenty extra to hang your planter with.
A few inches before the end, secure all eight strands with a tight knot.
Step 2Secure the rope to the base of the pot
Place the knot in the center of the pot after turning it over, and then split the strands into four groups of two. The bottom of the pot will be divided into equal parts as a result.
Small strips of adhesive tape should be used to fix these strands in position. Then, just past the base’s edge, tie a little knot in each group. These knots ought to be apparent once the job is finished and the pot is placed back upright.
Step 3Create the knots
You are now prepared to begin tying the rope plant hanger together. One rope from the first group and one rope from the next group should be taken, and they should be tied together in a knot. Be sure to place this in the middle of the two upper knots. Continue until the first row is finished, traveling all the way around the pot as you go.
Pull the rope very gently to remove any slack, then use a small piece of sticky tape to hold each knot in place. Although the rope will be kept in place by the tape, it will make succeeding rows easier to knot together when it is eventually removed.
Continue by tying the next row of knots in the same manner. Again, the size of your pot will determine how many rows you need. However, we advise leaving a 1/2 inch space between the last row and the top edge for all projects.
Step 4Tie it together and hang
Last but not least, flip the pot over one more and tie the eight rope strands together in a single knot. You can tie the knot at any desired height. Just make sure that all of the ropes are the same length (therefore allowing your pot to hang level). If they are, cut off any extra, and take off all the adhesive tape.
You have a few alternatives for hanging your brand-new macram plant holder. The rope can be hung directly from the screw hook if you like. Alternatively, you could attach the rope to a wooden ring and hang it there for a more tasteful and polished look.
Start making your rope hanging basket today
Ready to begin knotting? Make a chic rope hanging basket for your house or yard by selecting your succulent and stocking up on rope supplies. Also keep in mind that we always like seeing our customers’ creations! We’ll be sure to include some of the best images of the macram plant holders you make using our ropes, strings, and twines on our website and social media pages if you send us some pictures.
How can plants be hung on walls without using nails?
How Not to Drill for Plant Hanging
- Tension rod
- Hooks S.
- Hooked wall hanging planters.
- an apparel rack.
- a stand for hats or coats.
- Wall or ceiling hooks with adhesive.
- Skylight Suction Hooks
- Hooks for the doors.
Are plants able to be hung from curtain rods?
Yes! Plants can be hung from a curtain rod. I have mounted curtain rods for actual curtains, not for plants, and I have several plants dangling from them. One for two. Even a curtain rod can be transformed into a hanging plant pole. I just decided against it because they are more expensive than a pipe or a big wooden dowel.
Whether you’re using a curtain rod for drapes with plants in them or just for plants, there are three things to keep in mind! These are them.
Weight rating of the curtain rod
If your curtain rod has a weight rating, check it. Many of the thinner curtain rods weren’t designed to support a lot of weight. It’s generally wise to update to a curtain rod that can support a little bit more weight if you find your curtain rod beginning to bow anywhere where your plants are hanging.
Strength of the curtain rod
Numerous curtain rods can be extended. The central portion of the rod, however, can become weak when they extend to their maximum length. Try to avoid using your curtain rod’s maximum extension if it is extendable. Add a third curtain bracket in the rod’s midsection for support if you intend to use the entire expanded length of the rod.
Mounting hardware and mechanism
In relation to curtain brackets, the mechanism and mounting supplies you choose to mount the curtain rod also matter. For instance, be sure to use strong brackets and drywall anchors that are weighted for the proper amount of weight if you’re mounting them in drywall.
The brackets should be mounted directly into studs, although this isn’t always possible. So it’s excellent if you can. If you can’t, make sure to use strong drywall anchors in conjunction with your screws.