Why Have My Hydrangeas Not Flowered

All varieties of hydrangeas should begin to bloom in the early spring or mid- to late-summer, and each flower should endure for many weeks.

Too much fertilizer, not enough sunlight, transplant shock, moisture stress, frost damage on developing flower buds, and severe trimming of the old wood that supports this season’s new hydrangea blossoms are the causes of hydrangeas not blossoming.

For more information on the reasons why your hydrangea isn’t blooming and how to make sure it blooms profusely the following year, continue reading.

Many customers ask why their hydrangeas aren’t blooming. The primary reasons hydrangeas don’t bloom are incorrect pruning, bud damage due to winter and/or early spring weather, location and too much fertilizer.

There are hydrangea kinds that bloom on either fresh or old wood, or even both. Both new and old wood are the growth of the following year (spring), respectively.

Consider that this year, you bought a Nikko Blue Hydrangea. For the next year, Nikko’s produce blooms in the fall. Your Nikko is therefore creating blooms this fall that will blossom in the spring.
Therefore, you wouldn’t want to completely prune your Nikko Blue Hydrangea this fall while you are pruning your perennials. Pruning the Nikko Blue Hydrangea this fall would effectively mean cutting off your hydrangea flowers for the upcoming spring.
The idea behind Endless Summer, a hydrangea variety that blooms on both old and new wood, is that the plant will set blooms this fall to blossom not only in the spring of the following year, but will also keep producing blooms in the spring of the following year to extend the blossoms into the summer.
Once more, pruning your Endless Summer hydrangea in the fall would mean removing some of the flowers that would blossom in the spring.

The hydrangea’s plant tag will indicate whether it blooms on fresh wood, old wood, or both. It is typically preferable to wait until spring to prune your hydrangeas. As the plant grows, you’ll see stems that are fragile when bent and lack any leaves. Since these stems are dead and won’t produce any flowers, they should be clipped close to the plant’s base.

The second reason why your hydrangeas aren’t blooming is probably the weather. Buds of hydrangeas are extremely susceptible to cold. Therefore, it is a good idea to wrap your hydrangea for the winter if it is an old wood hydrangea. Keep in mind that old wood hydrangeas establish their blooms for the following spring in the fall. Therefore, you won’t have blossoms in the spring if the fall-produced buds are frozen in the winter.

You can wrap anything with regular burlap. Burlap should be wrapped around the plant and filled with mulch or leaves after the first hard frost and after the hydrangea’s leaves have dropped. In order for the buds to survive the winter and sprout the following spring, the plant receives insulation from this. Never wrap your hydrangeas in plastic. When warmer winter days arrive, the plant cannot breathe since plastic, unlike burlap, doesn’t breathe. As a result, the plant can heated to such high temperatures that it cooks within the plastic and perishes.

The second most frequent weather-related cause hydrangeas do not blossom is late spring killing frosts. We saw really chilly temperatures in April both this year and last year after beautiful spring days. When springtime temperatures drop below freezing, hydrangeas need to be covered with an old beach towel or sheet. Because of the temperature dip, there won’t be any blossoms.

The majority of hydrangeas require at least 3 to 4 hours of light per day to bloom. The best light is in the early morning, midday light is acceptable if it is dabbled light rather than beating sun, and afternoon sun is typically too hot. Check the plant label, though. Newer hydrangea cultivars are being created that can withstand more sun exposure time and sun intensity. A hydrangea in full sun will require much more watering than one in diffused light, so keep that in mind.

High nitrogen fertilizer should not be used to feed hydrangeas. Nitrogen is indicated by the first number on the fertilizer ratio. (The ratio stands for N, P, and K) For healthy leaves and general good growth, some nitrogen (N) is required; however, a ratio of 8-16-6 or any similar combination with a higher middle or phosphorus (P) value is preferred. The growth of roots and shoots is encouraged by phosphorus, which improves the blooming process.

Potash (K), the third element’s last quantity and the lowest ratio, is for plant hardiness. Because hydrangeas prefer acidic soil, they can be fertilized with fertilizers designed for such plants. Hydrangeas only require fertilizing twice a year, once in early spring and once in mid-summer. To avoid root burn, make sure the soil is always moist before applying a fertilizer.

What should I feed hydrangeas to encourage blooming?

When purchasing fertilizer, check the labels to see how much nitrogen (N), phosphate (P), and potassium are present (K). A general-purpose, balanced fertilizer such a 10-10-10 N-P-K or 12-4-8 N-P-K is typically best for hydrangeas. Consider using a fertilizer with additional phosphorus if you want your hydrangea blossoms to be bigger and more numerous.

Since phosphorus is the middle element, fertilizer with the formula 10-20-10 will do. Choose a slow-release granular fertilizer with the designation “bloom boost” if you’re looking into it because it might also include more phosphorus.

What occurs if hydrangeas are not pruned?

If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.

Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.

Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.

Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.

The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.

They are very comparable to lacecap types, but smaller and with more compact leaves.

Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.

Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.

regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.

Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.

When do hydrangeas bloom?

The type, cultivar, planting zone, and hydrangea blooming season all affect when they bloom. The majority of hydrangeas with new growth form buds in the early summer in preparation for blooming the next spring, summer, and early fall. Hydrangeas may stop flowering in the heat of the summer in hot locations, but they will blossom again in the fall.

How do you cut back hydrangeas?

Hydrangea plants don’t require pruning if they are allowed plenty of room to develop in the garden. Only the periodic clearance of dead wood is necessary.

Do you need to deadhead hydrangeas?

Your hydrangeas will continue to bloom into the fall if you deadhead them. Hydrangeas make wonderful cut flowers, so there’s no need to wait until the flower wilts. Leave the early fall blossoms alone so they can fade naturally. In the days leading up to your freeze date, you don’t want to promote new growth.

How do you control hydrangea color?

The distinction of hydrangeas is that you can modify their color. But keep in mind that not all hydrangea varieties can change their color. H. macrophylla, a species of bigleaf hydrangea, responds to changes in soil pH. Hydrangeas can absorb aluminum thanks to a low soil pH, which gives the blossoms a lovely blue hue. Reduce the pH of your soil by mixing in sulfur or peat moss to enhance the number of blue hydrangea flowers. Throughout the growth season, you can keep amending your soil with extra aluminum sulfate. When you add ground limestone to boost the pH, pink and red blooms shine.

You may precisely modify your hydrangea color using a soil pH test. To avoid the plant from being harmed, keep the pH level below 7.5. In the fall, all hydrangeas will naturally fade regardless of the modifications you’ve made. Don’t worry, the plant will display vibrant, new blossoms once more in the spring.

Can hydrangeas grow in shade?

Although they won’t blossom in complete shade, hydrangeas prefer dappled or infrequent shade. How much sun do hydrangeas need is more important to consider than whether they love the sun or the shade. Your hydrangeas require more sunlight the further north in your garden you are. A general guideline is six hours of sunlight each day. However, southern hydrangeas can thrive with just three hours of sunlight per day.

Can hydrangeas grow in full sun?

While hydrangeas prefer morning sun, they struggle in the hot, afternoon sun. For these gorgeous creatures, partial shade in the later hours of the day is optimal.

Can you grow hydrangeas in pots?

Even if you don’t have enough room in your garden to cultivate hydrangeas, you can still enjoy these lovely blossoms by learning how to grow hydrangea in a pot. As long as you follow the fundamentals of caring for hydrangeas, the procedure is rather straightforward. Select a pot with at least an 18-inch diameter to accommodate the mature size of the particular hydrangea you are growing. In order to maintain the constant moisture level that hydrangeas demand, look for non-porous containers. Excess water will be able to adequately drain thanks to drainage holes. Consider growing dwarf hydrangeas like Buttons ‘n Bows, Mini Penny, and Little Lime.

How do you keep hydrangeas from wilting?

Morning irrigation on a regular basis can assist stop withering. Some hydrangea cultivars simply can’t stand the heat. No matter how much water you give them, they will begin to wilt in the afternoon heat. Mulch applied in layers can help soil retain moisture and stay cool. You shouldn’t be concerned if your hydrangeas bloom again once the day cools. A little midday wilting is preferable to overwatering and drowning your hydrangeas.

When ought my hydrangea to bloom?

Hydrangeas have huge bloom heads and exude an old-fashioned elegance. How to plant and take care of beautiful floral bushes is explained in our hydrangea growing guide. Additionally, learn the answers to frequently asked questions like “why aren’t my hydrangeas blossoming this year?”

About Hydrangeas

These elegant plants are simple to grow, withstand nearly any sort of soil, and produce an abundance of blossoms that are unmatched in the world of shrubs for their stunning flowers. Clear blue, vivid pink, frosty white, lavender, and rose blossoms sometimes grow on the same plant, enticing us with their colors.

From container gardens to shrub borders to group plantings, hydrangeas are great for a variety of garden locations. Breeders seem to give us more possibilities every year, and gardeners have countless expectations for bloom size and color. Varieties abound. Pay attention to the species listed below to get an idea of how your hydrangea will develop as some require different maintenance. The joys you experience will be enhanced when you know what to expect.

Enjoy this tribute to hydrangea beauty and read our guide below to discover how to grow hydrangeas.

Where to Plant Hydrangeas

The majority of hydrangeas like fertile, moisture-rich soils that drain well. Compost can help improve bad soil.
Hydrangeas typically prefer some sun. In an ideal world, they would receive full sun in the morning and then some afternoon shade to avoid the intense midday sun. The Bigleaf Hydrangea (H. macrophylla), with its huge, prone-to-wilting leaves, is a prime example of this. Some kinds can withstand more direct sunlight.
Depending on the kind, place hydrangeas anywhere between 3 and 10 feet apart. Plants should always be spaced according to their anticipated mature size!

When to Plant Hydrangeas

The optimum season to plant hydrangeas is in the fall, followed by spring. The cooler shoulder seasons are the ideal times to plant shrubs because they will have plenty of time to build a strong root system before the intense heat of summer or the bitter cold of winter.
In the early morning or late afternoon, plant the shrubs. The plant is less prone to experience heat stress from direct sunshine because it is typically cooler.

How to Plant Hydrangeas

Gently remove the hydrangea from its container and examine the root ball. Snip off any rotten or dead sections, and if the plant is very root-bound, pry the roots free.
Make a hole that is two to three times as big and as deep as the root ball. The top of the planting hole should be level with the base of the plant, which is where the stem joins the earth.
After placing the plant in the hole, add enough soil to fill it halfway. generously hydrate. Fill the remaining space in the hole with soil once the water has been absorbed.
once more, thoroughly rinse.

How to Grow Hydrangeas from Cuttings

Cuttings of hydrangeas can be easily grown. They easily take root, and the process is a wonderful teaching tool for propagation. This is how you do it:

Find a branch on a mature hydrangea that is fresh growth and has not flowered. In comparison to older growth, new growth will appear lighter in color, and the stem won’t be as firm.
Make a horizontal incision 4 to 5 inches down from the branch’s tip. Make sure your cutting has at least three to four pairs of leaves.
Trim the cutting’s lowest pair of leaves so that they are flush with the stem. If you can afford to remove more than one pair of leaves, do so. Roots develop more readily from these leaf nodes. But make sure to leave at least two pairs of leaves at the cutting’s tip.
Remove the tip half of any leaves that are still pretty large by cutting them in half. This keeps the leaves from slamming into the sides of the plastic bag you’ll later use to cover the cutting (to keep the humidity up).
(Optional) Sprinkle rooting hormone and a plant antifungal powder on the stem’s leafless area (both available at a local hardware or garden store). This will promote roots and deter decay.
Prepare a small pot and put moistened potting soil inside. The cutting should be planted in the ground, buried down to the first remaining pair of leaves. Lightly water the area surrounding the stem to close any air spaces.
Wrap a plastic bag loosely around the entire pot. To prevent the cutting’s leaves from rotting, make sure the bag is not touching them. The bag can be supported by chopsticks or other such objects to keep it off the leaves.
Put the pot in a warm location that is protected from the wind and sun.
Only rewater your cutting after the top layer of soil is dry after checking on it every few days to make sure it isn’t decaying. In a few weeks, hopefully, the cutting will start to root! If you feel resistance when you gently tug on the cutting, roots have grown.

Watering

Make sure hydrangeas get enough water for the first year or two after planting and throughout any droughts.
Over the course of the growing season, water at a rate of 1 inch per week. Three times a week of heavy watering is preferable to shallow watering. Root growth is promoted by this.
All varieties of hydrangeas benefit from constant moisture, but bigleaf and smooth hydrangeas need more water.
If the soil is too dry, the leaves will wilt, and there won’t be enough moisture for the flowers to bloom.
To water thoroughly while keeping moisture off the flowers and leaves, use a soaker hose.
The best time to water hydrangeas is in the morning to protect them from disease and get them ready for the heat of the day.
Under your hydrangeas, spread organic mulch to help keep the soil cool and moist, gradually add nutrients, and enhance soil texture.

Fertilizing

You might not need to fertilize hydrangeas if your soil is rich. When fertilizer is applied in excess, blossoms are sacrificed in favor of green growth. A soil test is the most effective tool for determining your fertility requirements.

Apply fertilizer according to the type of hydrangeas you have. Every variety has varied requirements and will profit from applying fertilizer at various times.

Several mild fertilizer applications in March, May, and June are beneficial for bigleaf hydrangeas.
Two applications in April and June work best for oakleaf and panicle hydrangeas.
The only time smooth hydrangea plants require fertilizing is in the late winter.

Winter Protection

Cover plants with bark mulch, leaves, pine needles, or straw in the fall, at least 18 inches deep. If at all feasible, create cages out of chicken wire or snow fencing and cover the entire plant, including the tip, with the cages. (Avoid using maple leaves; they have a tendency to mat after becoming wet and may suffocate the plant.)

How to Prune a Hydrangea

Many of our readers’ questions involve pruning hydrangeas. It makes sense that it’s unclear because it relies on the hydrangea kind. Fortunately, identifying which type you have makes determining the best pruning strategy simple. Discover the fundamentals below, then read more about pruning different varieties of hydrangea here.

Pruning Common Hydrangeas

The Bigleaf cultivar of Hydrangea macrophylla is the most popular garden hydrangea shrub. (For more, see below.)

Bigleaf(H. macrophylla), Oakleaf(H. quercifolia), Mountain (H. serrata), and Climbing hydrangeas (H. anomala subsp. petiolaris) are pruned AFTERthe flowers fade in the summer. On stems from the previous season, these kinds bloom (“old wood).

Avoid pruning after August 1 since flower buds actually grow in the late summer and bloom the next season.
Dead wood should only be removed in the fall or very early spring.
To stimulate branching and fullness, trim one or two of the oldest stems by cutting them all the way to the ground.
Pruning the stems all the way to the base is necessary if the plant is old, neglected, or injured. For the following season, you’ll lose the flowers, but you’ll also revive the plant for subsequent ones.
The huge Mopheads should not be deadheaded (faded flowers removed); instead, you should leave them over the winter and trim them back in the early spring (to the first healthy pair of buds). Deadheading Lacecaps is OK; simply trim down to the second set of leaves below the bloom head.
Avoid pruning unless it is absolutely required while growing H. macrophylla (and H. serrata) cultivars in Zones 4 and 5, and then only after blooming. If not, merely remove dead stems in the spring.

Pruning Other Hydrangeas

Hydrangeas called Panicle (H. paniculata) and Smooth (H. arborescens) are clipped BEFORE flower buds develop. On stems from the current season, these kinds blossom (“new wood).

When the plant is dormant in the late winter, prune. The plant will therefore grow new buds in the spring that will result in blossoms even if the winter kills the buds.
In general, avoid pruning to “shape the bush” and just remove dead branches.