In the late winter, early spring, or just above a big bud known as a heading cut, trim back stems. The flower heads of these plants have a conical form. I wait to prune these until late winter or spring because I advise leaving the dried, tan flower heads on the plant to add some winter beauty to your garden. Favorite panicle hydrangeas include:
- H. paniculata ‘Bulk’ PP16, 812, Quick Fire
- (H. paniculata ‘Limelight’)
- Berry White (H. paniculata ‘Renba’ PP28, 509) first editions
Where should hydrangea flower stems be pruned?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
How deep should a hydrangea be cut?
Remove up to one-third of the older living stems from the hydrangea each summer, cutting them all the way to the ground. The plant will recover as a result. Before the end of July, if required, prune back the plant to regulate its growth and give the buds time to grow. Usually, the plant grows back to its previous size right away.
Where do you make hydrangea deadheading cuts?
These are your macrophylla hydrangeas, also known as mophead and lacecap, which come in purple, pink, and blue. They also include hydrangeas with oak-shaped leaves. While reblooming kinds flower twice, some cultivars only bloom once per season on stems from the previous year (old wood).
The initial set of hydrangea blossoms should be deadheaded as soon as they start to turn brown and dry. Cut the stem immediately above the first set of leaves and below the flower head. When this second set starts to fade, you can deadhead once again for reblooming varieties, but only until about mid-August. Your hydrangeas will then produce buds for the flowers of the next year; you don’t want to unintentionally cut these off. After the summer has ended, dried flower heads can remain on the shrubs to add visual interest over the winter.
Do you remove hydrangea blooms that have died?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
When should I prune the hydrangea’s flowers?
Late summer to early fall (August to September) sees the development of these plants’ bloom buds for the next year. So, before August, prune these shrubs once they are finished blooming (again, make a heading cut).
The Endless Summer is an exception. The Original Bigleaf Hydrangea (H. macrophylla ‘Bailmer’ PP15,298) as well as many cultivars from Bailey Nurseries’ Endless Summer line, including Blushing Bride, BloomStruck, Summer Crush, and Twist ‘n’ Shout.
On the wood from last year and any new wood that sprouts this year, the H. macrophylla blooms. Therefore, whether you prune it or not, it will bloom. A big, 4-foot-tall ring of hardware cloth can keep rabbits from nibbling on the stems of H. macrophylla over the winter.
The pink to blue tint of the Endless Summer hydrangea’s flowers (achievable with the right soil amendment) plus the fact that it blooms on both old and new wood caused it to make a big splash on the Minnesota landscape plant scene.
Should hydrangeas be pruned back during the winter?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Cut the flowers all the way back to get larger flowers.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Leave an old growth framework to reduce flopping.
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Should I prune my hydrangea’s dead heads?
Since their flower heads were left on during the winter to preserve the buds underneath, most hydrangeas are clipped in the spring. The exception to this rule is climbing hydrangeas, which are clipped in the summer after blossoming.
Hydrangeas can avoid becoming woody and crowded by being pruned, which also directs the plants’ energy toward strong growth and big blooms. Apply compost or well-rotted manure as mulch to the plant after pruning.
As some hydrangea varieties flower on old wood while others do not, different hydrangea varieties require different pruning techniques. Inadequate pruning will have an impact on flowering.
Cut back the old flower heads to a pair of buds below on Hydrangea macrophylla, Hydrangea aspera, Hydrangea serrata, and Hydrangea quercifolia. You can prune Hydrangea paniculata and Hydrangea aborescens more severely.
It’s best to merely deadhead your hydrangea and watch it grow if you’re unsure of what kind it is. You can prune it more severely the following year if you see that it blooms on the growth from this year. Learn more about growing hydrangeas, and if you want to add more to your garden, be motivated by our selection of the top nine varieties.
What happens to hydrangeas if I don’t deadhead them?
Deadheading too-tall hydrangeas can occasionally be challenging. Your other option is to keep them on if you don’t have the skills to reach spent flowers or all of the spent blooms. And you can do that without suffering too much harm.
Simply omit deadheading hydrangeas, and your plant won’t suffer. At least nothing major enough to need worrying about.
Your hydrangea might not produce as many or as large of blooms as it would have if the spent blooms had been removed. It will nevertheless continue to bloom.
Having said that, you can think about pruning hydrangeas that have gotten too tall in order to make them smaller and easier to handle.
This will make it simpler for you to maintain the tidy appearance of your hydrangeas. Additionally, it will make it simpler to remove spent blooms from plants and promote future blooms with greater vigor.
How can I encourage my hydrangea to bloom more?
Early spring or mid-July through late summer are the blooming seasons for hydrangeas. The methods for extending hydrangea blossoms’ life and producing more of them are discussed below.
Plant the hydrangea where it will receive morning light and afternoon shade, keep the soil continuously moist, and treat it in the spring with a fertilizer that is well-balanced to encourage more flowers. To encourage more blossoms, don’t prune your hydrangea too frequently. Hydrangeas bloom on the growth from the previous year.
Continue reading to find out how to lengthen the time that your hydrangea blooms as well as my personal pick for the best fertilizer for hydrangeas to enhance blossoming.