Smooth hydrangea should be cut back by early March so the plants have enough time to produce stems and develop flower buds. Smooth hydrangea blooms on the current year’s growth. When bigleaf hydrangea plants are fully grown, in the first few weeks of spring, cut a few (maximum one-third) of the older branches to the plant’s base.
What time of year should I trim my hydrangea?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Do you trim hydrangeas in the spring or the fall?
Pruning is not typically thought of as one of the many gardening activities that may be done in the fall, despite the fact that there are several. It can be difficult to cultivate hydrangeas successfully in New Hampshire, and if you want your plants to blossom, there is frequently very little room for error in pruning.
Wait until Spring to prune hydrangeas
In New Hampshire, hydrangeas come in a variety of kinds, and each one has quite distinct growth patterns and pruning needs. Some plants only produce flowers on fresh growth, while others mostly produce flower buds on older wood. In any case, it is better to postpone all hydrangea pruning until spring. Hydrangeas, as with all other trees and shrubs, go dormant in the fall. Not much new growth is produced by them until the next spring. As new growth is more vulnerable to harsh cold at the location of wounds, plants that have been trimmed now run a higher risk of winter damage. Additionally, fall pruning may lessen the quantity of June blooms.
Considerations for pruning hydrangea species commonly grown in New Hampshire gardens
The gigantic blue mopheads or lacecaps known as bigleaf hydrangeas (Hydrangea macrophylla), which are familiar to most gardeners, form their flower heads at the tips of stems on old wood from the previous year. Although lower buds along the stem have the capacity to grow blooms as well, the hydrangea’s blossoming potential is decreased if those buds are died or damaged throughout the winter. Wait until new growth sprouts in the spring before pruning your bigleaf hydrangeas. Approximately 1/4 inch above the first group of live buds, prune the plant. A hint: the interior of living stems will be green, whereas the interior of dead stems will be brown. Cut completely dead stems flush with the base.
The three other hydrangea species that are frequently planted in Fresh Hampshire—oakleaf (H. quercifolia), panicle (H. paniculata), and smooth—all bloom on new growth. Before the emergence of the leaves in the late winter and early spring, remove wasted flowers and prune the plant to improve its general structure and habit.
In conclusion, there are a ton of other activities you can engage in to stay occupied in the garden during fall. Save the spring for hydrangea pruning.
What occurs if hydrangeas are not pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Do hydrangeas need to be pruned before winter?
It’s not necessarily necessary to severely prune your hydrangeas (Hydrangea spp.) before putting them to bed for the winter. Hydrangeas grow in U.S. Department of Agriculture plant hardiness zones 3 to 9, depending on the variety, with each variety having its own specific pruning needs. Before you grab the shears, you must identify the type of hydrangea to know how far back to cut it for the winter.
Tip
Depending on the variety, hydrangeas can bloom on either old or new wood. Old-wood blooming hydrangeas need to be pruned just after the flowers fade in the late summer, whereas new-wood blooming hydrangeas should be pruned in late winter before new growth begins.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Should hydrangeas be pruned annually?
Only prune these hydrangeas in the summer after bloom, not in the fall. In August and September, old wood hydrangeas begin to form their bloom buds for the following year. It is advisable to delay pruning your hydrangeas until the following year if you don’t do it right away. If not, there won’t be any blossoms the next spring.
Should I remove the brown blooms on my hydrangea?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
In the spring, how far back should hydrangeas be pruned?
You can prune hydrangeas paniculata and aborescens more severely without losing this year’s blossoms because they bloom on new wood. Although pruning is not necessary, if it is not done the plant will grow taller, with the majority of its flowers at the top.
Cut back to a healthy framework
Trim the previous year’s growth back to a strong framework that is between 30 cm and 60 cm high in the early spring. On each stem, prune to just above a pair of sound buds. For large flowers, prune back to the lowest healthy buds; less firmly for a more natural appearance or a higher plant.
Watch Monty Don describe the many hydrangea trimming techniques in spring:
When should dead hydrangea blossoms be removed?
These are your macrophylla hydrangeas, also known as mophead and lacecap, which come in purple, pink, and blue. They also include hydrangeas with oak-shaped leaves. While reblooming kinds flower twice, some cultivars only bloom once per season on stems from the previous year (old wood).
The initial set of hydrangea blossoms should be deadheaded as soon as they start to turn brown and dry. Cut the stem immediately above the first set of leaves and below the flower head. When this second set starts to fade, you can deadhead once again for reblooming varieties, but only until about mid-August. Your hydrangeas will then produce buds for the flowers of the next year; you don’t want to unintentionally cut these off. After the summer has ended, dried flower heads can remain on the shrubs to add visual interest over the winter.
Can hydrangeas be cut all the way down in the fall?
According to the University of California Extension, bigleaf, lacecap, and oakleaf kinds of hydrangeas that flower on old wood require quick pruning after flowering. On growth that appears after flowers bloom, these hydrangeas create buds that they retain until the next spring. By cutting these back in the fall, new flower buds are eliminated, leaving only leaves.
If you want to abbreviate the plant or promote bushier growth, prune by midsummer, typically within two weeks of the petals withering. Pruning does not need to be done annually. New blossoms are still produced by unpruned stems, but only at the tips of taller stems.
In the fall, what should I do with my hydrangeas?
Short response? Just enough! However, we are aware that many who are unsure of whether to cut them down or remove the dried blooms won’t find this response to be particularly helpful. So, now that summer is over and October is here, here’s what you need to know about your hydrangeas.
2. Once your hydrangea flowers turn brown, you have two choices, regardless of the color of your flowers. Just below the bloom, you can either remove the dead flowers from the plant or leave them on it till winter. The majority of dried hydrangea blossoms fall off sometime over the winter, and any that are still attached to the plant can be picked off in the spring.
3. Avoid “tidying them up! You’ll have less flowers the next summer if you trim the stems now to make them look neater. Waiting until May to prune any hydrangea varieties is preferable, and for the blue and pink flowering mopheads and lacecaps, the only thing you should do at that time is remove any dead stems.
4. Fertilizing in the fall is a wise move.
When it’s growing season the following year, the shrubs will benefit from a little coating of Holly-tone around the plants.
5. Winter security? You have the choice. It has not been demonstrated that covering mopheads and lacecaps will be helpful if temperatures fall to zero or below, but a burlap windscreen may be able to block chilly winter and spring winds in exposed areas.
6. Tidy up! It’s always a good idea to rake up the fallen Hydrangea leaves. By doing this, the area is less likely to harbor disease and insects that overwinter. This is crucial for hydrangea foliage control on the Cape, where Chilli Thrips have been found to deface the leaves.
Mophead hydrangeas provide stunning blue, purple, and pink flowers in the fall that contrast with the changing leaves.
Brown blooms are optional; if they irritate you, you can clip them off.