Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Should hydrangeas be pruned back during the winter?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
How far back should hydrangeas be pruned?
Before performing any significant “hard” trimming, let these plants grow for one or two seasons. Depending on whether you want a smaller or larger shrub, prune these hydrangeas in the spring to the ground or not at all once the shrub is established and has had a few growing seasons. On the growth from this season or fresh wood, flower buds will develop.
Favorite smooth hydrangeas include:
- (H. arborescens ‘NCHA7’ PP30,358) Invincibelle Mini Mauvette
- (H. arborescens ‘Abetwo’ PP20571) Incrediball
- The Annabelle tree (H. arborescens)
Should you remove hydrangea blooms that have faded?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
How should I get my hydrangeas ready for the winter?
Protecting flower buds is the aim of winter hydrangea care. The simplest approach is to pile 12 inches or so of mulch made of chopped-up leaves or bark around the base of the plant. After the ground freezes in the late fall, set the mulch pile there. Plants can then be exposed in the spring, when the temperature starts to stay above freezing.
What occurs if hydrangeas are not deadheaded?
Deadheading too-tall hydrangeas can occasionally be challenging. Your other option is to keep them on if you don’t have the skills to reach spent flowers or all of the spent blooms. And you can do that without suffering too much harm.
Simply omit deadheading hydrangeas, and your plant won’t suffer. At least nothing major enough to need worrying about.
Your hydrangea might not produce as many or as large of blooms as it would have if the spent blooms had been removed. It will nevertheless continue to bloom.
Having said that, you can think about pruning hydrangeas that have gotten too tall in order to make them smaller and easier to handle.
This will make it simpler for you to maintain the tidy appearance of your hydrangeas. Additionally, it will make it simpler to remove spent blooms from plants and promote future blooms with greater vigor.
Can I prune my hydrangeas all the way down?
These hydrangeas are simple to manage because they bloom each year no matter how they are taken care of or treated. They can be cut down to the ground in the fall and will reappear the next spring with an abundance of blossoms. However, over time, this severe trimming might make the plant gradually weaker.
Is the wood on my hydrangea old or new?
Some hydrangea species, known as “old wood,” bloom on growth from the previous year. The flower buds that will bloom in the upcoming summer are present in this old wood. We would have a plant without flowers this year if we pruned in the winter or spring because we would lose the flower buds. As a result, many cultivars undergo pruning following summer blooming.
The young growth that appears in the springtime bears flower buds when hydrangeas that bloom on new wood are present. These plants can be clipped in late winter or early spring before new growth starts because the buds are not present during the winter months.
Does fresh or old wood produce flowers for hydrangeas?
Knowing when to prune your hydrangeas might mean the difference between having a bush covered in colorful blooms and having none at all. The variety you’re cultivating will determine the best timing, though. Is there a hydrangea in your garden that blooms on old wood or new wood? That is the first and most crucial question.
Mophead, Lacecap, and Mountain Hydrangeas are examples of bigleaf kinds that should only be pruned in the summer because they flower on old wood. The climbing and oakleaf hydrangeas also adhere to this pattern. It is advisable to prune Smooth and Panicle Hydrangeas before the growing season begins because they bloom on new growth.
Many seasoned gardeners who follow the Way of the Hydrangea will advise you that sometimes not pruning at all is the wisest course of action. Some old-growth hydrangeas simply require dead-heading and occasional trimming; they shouldn’t be cut back unless you need to change their size or shape.
How should hydrangeas seem throughout the winter?
Throughout the summer, the enormous flower heads of hydrangea bushes (Hydrangea spp.) can cover a landscape with eye-catching flashes of blue, pink, or white. Most hydrangea cultivars, which are hardy in USDA zones 4 to 9, can survive a moderate winter without particular care, but they benefit from careful watering, pruning, fertilizing, mulching, and weathering over the chilly season for their spring growth and beauty. Winter doesn’t cover their stems, and if they aren’t clipped, old flower heads will turn brown.
Tip
If not removed, the dried and blackened flower heads of hydrangeas will stay that way all winter long. In the fall, hydrangeas likewise lose their leaves, but the brown stalks hold upright unless they are cut back.
How should I care for hydrangeas in the autumn?
Short response? Just enough! However, we are aware that many who are unsure of whether to cut them down or remove the dried blooms won’t find this response to be particularly helpful. So, now that summer is over and October is here, here’s what you need to know about your hydrangeas.
2. Once your hydrangea flowers turn brown, you have two choices, regardless of the color of your flowers. Just below the bloom, you can either remove the dead flowers from the plant or leave them on it till winter. The majority of dried hydrangea blossoms fall off sometime over the winter, and any that are still attached to the plant can be picked off in the spring.
3. Avoid “tidying them up! You’ll have less flowers the next summer if you trim the stems now to make them look neater. Waiting until May to prune any hydrangea varieties is preferable, and for the blue and pink flowering mopheads and lacecaps, the only thing you should do at that time is remove any dead stems.
4. Fertilizing in the fall is a wise move.
When it’s growing season the following year, the shrubs will benefit from a little coating of Holly-tone around the plants.
5. Winter security? You have the choice. It has not been demonstrated that covering mopheads and lacecaps will be helpful if temperatures fall to zero or below, but a burlap windscreen may be able to block chilly winter and spring winds in exposed areas.
6. Tidy up! It’s always a good idea to rake up the fallen Hydrangea leaves. By doing this, the area is less likely to harbor disease and insects that overwinter. This is crucial for hydrangea foliage control on the Cape, where Chilli Thrips have been found to deface the leaves.
Mophead hydrangeas provide stunning blue, purple, and pink flowers in the fall that contrast with the changing leaves.
Brown blooms are optional; if they irritate you, you can clip them off.
Many customers ask why their hydrangeas aren’t blooming. The primary reasons hydrangeas don’t bloom are incorrect pruning, bud damage due to winter and/or early spring weather, location and too much fertilizer.
There are hydrangea kinds that bloom on either fresh or old wood, or even both. Both new and old wood are the growth of the following year (spring), respectively.
- Consider that this year, you bought a Nikko Blue Hydrangea. For the next year, Nikko’s produce blooms in the fall. Your Nikko is therefore creating blooms this fall that will blossom in the spring.
- Therefore, you wouldn’t want to completely prune your Nikko Blue Hydrangea this fall while you are pruning your perennials. Pruning the Nikko Blue Hydrangea this fall would effectively mean cutting off your hydrangea flowers for the upcoming spring.
- The idea behind Endless Summer, a hydrangea variety that blooms on both old and new wood, is that the plant will set blooms this fall to blossom not only in the spring of the following year, but will also keep producing blooms in the spring of the following year to extend the blossoms into the summer.
- Once more, pruning your Endless Summer hydrangea in the fall would mean removing some of the flowers that would blossom in the spring.
The hydrangea’s plant tag will indicate whether it blooms on fresh wood, old wood, or both. It is typically preferable to wait until spring to prune your hydrangeas. As the plant grows, you’ll see stems that are fragile when bent and lack any leaves. Since these stems are dead and won’t produce any flowers, they should be clipped close to the plant’s base.
The second reason why your hydrangeas aren’t blooming is probably the weather. Buds of hydrangeas are extremely susceptible to cold. Therefore, it is a good idea to wrap your hydrangea for the winter if it is an old wood hydrangea. Keep in mind that old wood hydrangeas establish their blooms for the following spring in the fall. Therefore, you won’t have blossoms in the spring if the fall-produced buds are frozen in the winter.
You can wrap anything with regular burlap. Burlap should be wrapped around the plant and filled with mulch or leaves after the first hard frost and after the hydrangea’s leaves have dropped. In order for the buds to survive the winter and sprout the following spring, the plant receives insulation from this. Never wrap your hydrangeas in plastic. When warmer winter days arrive, the plant cannot breathe since plastic, unlike burlap, doesn’t breathe. As a result, the plant can heated to such high temperatures that it cooks within the plastic and perishes.
The second most frequent weather-related cause hydrangeas do not blossom is late spring killing frosts. We saw really chilly temperatures in April both this year and last year after beautiful spring days. When springtime temperatures drop below freezing, hydrangeas need to be covered with an old beach towel or sheet. Because of the temperature dip, there won’t be any blossoms.
The majority of hydrangeas require at least 3 to 4 hours of light per day to bloom. The best light is in the early morning, midday light is acceptable if it is dabbled light rather than beating sun, and afternoon sun is typically too hot. Check the plant label, though. Newer hydrangea cultivars are being created that can withstand more sun exposure time and sun intensity. A hydrangea in full sun will require much more watering than one in diffused light, so keep that in mind.
High nitrogen fertilizer should not be used to feed hydrangeas. Nitrogen is indicated by the first number on the fertilizer ratio. (The ratio stands for N, P, and K) For healthy leaves and general good growth, some nitrogen (N) is required; however, a ratio of 8-16-6 or any similar combination with a higher middle or phosphorus (P) value is preferred. The growth of roots and shoots is encouraged by phosphorus, which improves the blooming process.
Potash (K), the third element’s last quantity and the lowest ratio, is for plant hardiness. Because hydrangeas prefer acidic soil, they can be fertilized with fertilizers designed for such plants. Hydrangeas only require fertilizing twice a year, once in early spring and once in mid-summer. To avoid root burn, make sure the soil is always moist before applying a fertilizer.