For those of us who live in northern climes with more severe winters, The Endless Summer series represents a milestone in hydrangea breeding.
Older hydrangea kinds only produced flowers on old wood or stems that had grown the previous year. All flowers for the following season were gone once that growth was destroyed due to harsh winter circumstances, damage, or unintentional autumn trimming.
The plants in the Endless Summer series are significantly more adaptable in the environment because they bloom on both new and old wood. The plants won’t generate many, if any, buds on the growth of the current season, though, if the plants are not properly nourished in the spring.
Any Endless Summer variety will grow best in an easterly direction or in a spot in the garden that receives morning sun and afternoon shade. To make a richer soil that will store nutrients and fertilizers better and retain more moisture, use a decent compost.
Use Plant-tone and granular lime for purple to pink blossoms or Holly-tone and holly for blue flowers when fertilizing your Endless Summer Hydrangeas in the spring.
We advise fertilizing in April, May, and June with 1 cup of fertilizer for every foot of branch spread for the optimum flowering. For instance, 9 cups of fertilizer would be applied over a three-month period to a plant that is 3 feet broad. After this time, fertilizer shouldn’t be used to plants.
Continual Summer Fall is not the time to prune hydrangeas. Rather, only prune them in May. This will guarantee that the flower buds that survived the winter have opened.
Plants marked with a number sign (#) and a number are generally the same size as gallon pots; for example, #2 is equivalent to a 2 gallon pot, #3 to a 3 gallon pot, and so on. These plants are offered for sale in pots.
Plants with a height (such as 5-6′) give an estimate of the plant’s present height.
Plants that are measured in inches (such as 2.5″) are identified by their caliper, or trunk width.
Plants are typically larger when measured by caliper (inches) than when assessed by height (feet).
In Michigan, when should hydrangeas be pruned?
The sort of hydrangeas you have will determine when to prune. On the wood from the previous year, oakleaf hydrangeas (Hydrangea quercifolia) and pink and blue hydrangeas (Hydrangea macrophylla) blossom. Only shortly after blossoming should they be trimmed. The flower buds for the upcoming year’s blossoms will be lost if you prune them in the late summer, fall, or spring before they bloom. Hydrangeas like the PeeGee, Annabelle, and tardiva (Hydrangea paniculata and H. arborescens), which bloom on the growth of the current season, can be pruned in the late fall, early winter, or early spring.
How are Endless Summer hydrangeas prepared for the winter?
The first hydrangeas to bloom on new growth and have the capacity to rebloom all summer long are called “Endless Summer” varieties. This unusual plant will need special maintenance.
Follow these suggestions if you’ve introduced one of these wonderful plants to your landscape to ensure that “Endless Summer” remains the highlight of your yard for many years to come.
The following is advised to ensure overwintering success in the first year:
- After August 15th, cease all fertilizer applications in order to prepare the plant for winter.
- Till the ground freezes in the fall, keep the soil moist.
- Apply a four-inch layer of organic mulch over the plant (wood mulch, leaves, etc.). It is not necessary to trim back or cover all stems all the way to the tip.
When entirely dormant (about November 30), or at the same time as you cover perennials in your garden, covering should be done.
- When the ground is no longer frozen in the spring, you should re-plant your perennials. The plant will expand from its root system and any old branches that made it through the winter.
- Be tolerant. Up until the late spring heat spurs the plant to develop rapidly, growth will be gradual.
- The old branches can be cut back to a finger’s width above the fresh, green growth once you notice it.
- Watch your plant develop and blossom while you relax; depending on your environment, this should happen around the middle of July.
The Endless Summer Hydrangea is quite tolerant and won’t suffer from being neglected or clipped improperly. In actuality, it’s preferable to leave young, recently planted bushes alone. Your Endless Summer will bloom on both old and new wood, unlike other hydrangea varieties (branches that grew last year and new branches from this year).
The fact that this hydrangea will continue to form buds and bloom throughout the season is another distinctive quality; deadheading the spent flowers will promote this. You won’t harm the plant by cutting the blooms; in fact, you’ll stimulate the plant to produce more blossoms. Feel free to dry or utilize the blooms fresh cut in vases. The optimal time to prune is in the spring.
How should hydrangeas be cared for in Michigan?
Colorful flowering bushes called hydrangeas can bloom for weeks on end and are unaffected by pests or diseases. The showy parts of the blooms aren’t actually flower petals, which is why they continue for such a long time. They are spectacular, sterile, multicolored sepals that are colorful to draw pollinating insects. The fertile flowers are typically located in the center of the cluster and are relatively tiny and unnoticeable. The “flower show” is prolonged because the sepals cannot be pollinated, which prevents them from going to seed.
Partially shaded hydrangeas grow on wet, forested soil that has been improved with peat moss and leaf mold. Throughout the growing season, give them enough of water for the greatest results.
When it comes to hydrangeas that won’t bloom, two words to keep in mind are “too much. Although hydrangeas thrive in moderate shade, excessive shade can lead to stunning leaves without any flowers. Too much fertilizer, particularly heavy nitrogen fertilizer, may also be a concern. Again, this will result in lovely leaves but few, if any, blossoms. When they begin to blossom, use a balanced fertilizer, such as 16-16-16. Lack of blossoms can also be caused by excess moisture or dryness.
The majority of big leaf hydrangeas (H. macrophylla, popularly known as “mopheads”) bloom on old wood from the previous season and are consistently hardy to hardiness zone 6. Mophead hydrangeas in Michigan need be protected to ensure flowering. For the hydrangea to produce blooms the next summer, the old wood must remain. “Nikko Blue” is a mophead variety that was one of the only comparatively resilient big-leaf varieties offered for a long time. However, many gardeners preserve it in the early winter by wrapping the shrub in dead tree leaves and covering it with burlap or an upside-down bushel basket.
Place them close to the house, on the north or east side. This is a crucial decision. They would be exposed to the afternoon sun on the south or west side, which is too hot in the summer and increases the possibility of bud damage in the winter. Big leaf hydrangeas don’t bloom as much due to unexpectedly cold weather following a mild winter. The buds freeze and the hydrangea won’t bloom if the plant is actively growing when it receives a late spring or early winter frost.
Improper pruning is another frequent cause of macrophylla hydrangeas failing to bloom. Once more, the majority of hydrangeas flower on wood from the previous year. You won’t receive blossoms if you prune too much old wood or if you cut that wood too late. Because these types set their buds after late summer bloom, spring trimming would eliminate the flowers for that year. The flowering stems should be cut back to a healthy pair of buds or shoots shortly after bloom in late summer. As new growth appears, just the dead wood needs to be pruned in the spring.
When pruning hydrangeas for the winter?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.