Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
When should I prune my hydrangea’s blooms?
Depending on the kind you have, you must prune your hydrangeas correctly. Different hydrangea varieties need to be pruned at various times of the year.
For instance, you should hold off on pruning smooth hydrangeas like Annabelles until they are through blooming. All summer long, new blooms will result from pruning done in the late fall or early spring, before new growth starts.
Big Leaf and Oakleaf hydrangeas should only be pruned in the early fall to avoid cutting off buds that might otherwise prohibit summer blooming. It’s advisable to prune these hydrangea varieties as soon as they finish blooming.
Although Paniculata or PeeGee hydrangeas are a little more adaptable, they should still be clipped in the early spring before new growth starts.
Should I prune my hydrangea’s dead heads?
Since their flower heads were left on during the winter to preserve the buds underneath, most hydrangeas are clipped in the spring. The exception to this rule is climbing hydrangeas, which are clipped in the summer after blossoming.
Hydrangeas can avoid becoming woody and crowded by being pruned, which also directs the plants’ energy toward strong growth and big blooms. Apply compost or well-rotted manure as mulch to the plant after pruning.
As some hydrangea varieties flower on old wood while others do not, different hydrangea varieties require different pruning techniques. Inadequate pruning will have an impact on flowering.
Cut back the old flower heads to a pair of buds below on Hydrangea macrophylla, Hydrangea aspera, Hydrangea serrata, and Hydrangea quercifolia. You can prune Hydrangea paniculata and Hydrangea aborescens more severely.
It’s best to merely deadhead your hydrangea and watch it grow if you’re unsure of what kind it is. You can prune it more severely the following year if you see that it blooms on the growth from this year. Learn more about growing hydrangeas, and if you want to add more to your garden, be motivated by our selection of the top nine varieties.
When and how should hydrangeas be pruned?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.
What occurs if hydrangeas are not pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Should I remove the brown blooms on my hydrangea?
Myers advises leaving the dried blossoms on your hydrangeas if you’re looking for an easy way to spice up your winter yard. Bigleaf hydrangeas produce their final rush of flowers in the fall, so to enjoy the dried blossoms all winter long, stop deadheading at that time. To aid in the production of healthy buds in the spring, these can be removed.
How are hydrangeas prepared for the winter?
Protecting flower buds is the aim of winter hydrangea care. The simplest approach is to pile 12 inches or so of mulch made of chopped-up leaves or bark around the base of the plant. After the ground freezes in the late fall, set the mulch pile there. Plants can then be exposed in the spring, when the temperature starts to stay above freezing.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Many customers ask why their hydrangeas aren’t blooming. The primary reasons hydrangeas don’t bloom are incorrect pruning, bud damage due to winter and/or early spring weather, location and too much fertilizer.
There are hydrangea kinds that bloom on either fresh or old wood, or even both. Both new and old wood are the growth of the following year (spring), respectively.
- Consider that this year, you bought a Nikko Blue Hydrangea. For the next year, Nikko’s produce blooms in the fall. Your Nikko is therefore creating blooms this fall that will blossom in the spring.
- Therefore, you wouldn’t want to completely prune your Nikko Blue Hydrangea this fall while you are pruning your perennials. Pruning the Nikko Blue Hydrangea this fall would effectively mean cutting off your hydrangea flowers for the upcoming spring.
- The idea behind Endless Summer, a hydrangea variety that blooms on both old and new wood, is that the plant will set blooms this fall to blossom not only in the spring of the following year, but will also keep producing blooms in the spring of the following year to extend the blossoms into the summer.
- Once more, pruning your Endless Summer hydrangea in the fall would mean removing some of the flowers that would blossom in the spring.
The hydrangea’s plant tag will indicate whether it blooms on fresh wood, old wood, or both. It is typically preferable to wait until spring to prune your hydrangeas. As the plant grows, you’ll see stems that are fragile when bent and lack any leaves. Since these stems are dead and won’t produce any flowers, they should be clipped close to the plant’s base.
The second reason why your hydrangeas aren’t blooming is probably the weather. Buds of hydrangeas are extremely susceptible to cold. Therefore, it is a good idea to wrap your hydrangea for the winter if it is an old wood hydrangea. Keep in mind that old wood hydrangeas establish their blooms for the following spring in the fall. Therefore, you won’t have blossoms in the spring if the fall-produced buds are frozen in the winter.
You can wrap anything with regular burlap. Burlap should be wrapped around the plant and filled with mulch or leaves after the first hard frost and after the hydrangea’s leaves have dropped. In order for the buds to survive the winter and sprout the following spring, the plant receives insulation from this. Never wrap your hydrangeas in plastic. When warmer winter days arrive, the plant cannot breathe since plastic, unlike burlap, doesn’t breathe. As a result, the plant can heated to such high temperatures that it cooks within the plastic and perishes.
The second most frequent weather-related cause hydrangeas do not blossom is late spring killing frosts. We saw really chilly temperatures in April both this year and last year after beautiful spring days. When springtime temperatures drop below freezing, hydrangeas need to be covered with an old beach towel or sheet. Because of the temperature dip, there won’t be any blossoms.
The majority of hydrangeas require at least 3 to 4 hours of light per day to bloom. The best light is in the early morning, midday light is acceptable if it is dabbled light rather than beating sun, and afternoon sun is typically too hot. Check the plant label, though. Newer hydrangea cultivars are being created that can withstand more sun exposure time and sun intensity. A hydrangea in full sun will require much more watering than one in diffused light, so keep that in mind.
High nitrogen fertilizer should not be used to feed hydrangeas. Nitrogen is indicated by the first number on the fertilizer ratio. (The ratio stands for N, P, and K) For healthy leaves and general good growth, some nitrogen (N) is required; however, a ratio of 8-16-6 or any similar combination with a higher middle or phosphorus (P) value is preferred. The growth of roots and shoots is encouraged by phosphorus, which improves the blooming process.
Potash (K), the third element’s last quantity and the lowest ratio, is for plant hardiness. Because hydrangeas prefer acidic soil, they can be fertilized with fertilizers designed for such plants. Hydrangeas only require fertilizing twice a year, once in early spring and once in mid-summer. To avoid root burn, make sure the soil is always moist before applying a fertilizer.