- After flowering, long shoots of the climbing hydrangea (Hydrangea anomala subsp. petiolaris) should be pruned back.
- Established plants can withstand springtime harsh pruning, but all-at-once extensive cutting back is likely to restrict flowering over the following summers.
Do I need to prune my climbing hydrangea?
The first several years following planting, these plants grow somewhat slowly. Unfortunately, aside from starting with the biggest plant you can locate for sale, there isn’t much you can do to accelerate this process. In the first two to three years, pruning these plants is not advised. In the late spring or early summer, you can remove any damaged or dead growth.
If you don’t keep an eye on it, the plant can quickly become out of control as it starts to develop vigorously after establishment. In order to avoid removing the flower buds for the following year, pruning is best done after the plant blooms in the middle of the summer. Make sure to prune any ill or dead branches in the spring. Any time of year, you can keep removing these branches.
Do not dramatically trim back a plant that is simply over overgrown. It is better to do this gradually over a period of two to three years so as to avoid permanently harming the plant. For additional details, visit our hydrangea pruning guide.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
In the fall, how far back should hydrangeas be pruned?
Trimming season for hydrangeas that bloom on new wood runs from late fall through early spring. This group includes smooth and peegee forms, which function well whether they are pruned lightly, to the ground, or not at all. In order to maintain a compact stature and luxuriant flowering, Peegee hydrangeas are frequently pruned into trees with one or two main stems that are between 15 and 30 feet tall.
Smooth hydrangeas can be pruned all the way to the ground; however, the more frequently they are cut, the less able their stems are to withstand the weight of their huge blooms. Smooth hydrangeas grow in mounds that are 3 to 6 feet tall and wide. When the plants are pruned to leave between 18 and 24 inches of growth, a woody base forms that helps the stems support the pompom blooms more effectively.
How should a climbing hydrangea be winterized?
The north side of our house has a climbing hydrangea that we planted. If this plant needs any extra winter care, we would want to know because we live in zone 5.
In zones 4 through 7 or 8, climbing hydrangeas (Hydrangea anomala ssp. petiolaris) are considered hardy. In a zone 5 garden, proper care during the season typically suffices as winter protection. Before the ground freezes, thoroughly water the soil. If you haven’t previously, cover the soil with bark or woodchips. You might wish to offer the planter additional protection if it is open and exposed to the chilly winter winds by constructing a windbreak out of burlap, old Christmas trees, or other obstacles. Climbing hydrangeas should be planted in a protected area in Zone 4 and given some winter protection the first few years until the roots become established. Straw bales placed around the vine will shield its base and root system.
How do I prune a hydrangea that climbs?
Every spring, use leaf mold, compost, or well-rotted manure to mulch hydrangeas. They don’t require feeding because doing so promotes the growth of leaves at the expense of blossoms. Keep plants well-watered during hot spells in the summer because hydrangeas have a propensity to wilt in hot weather and plants planted up walls are frequently under a “rain shadow,” which means they don’t get wet when it rains.
How to prune Hydrangea petiolaris
After flowering in the summer, climbing hydrangeas benefit most from pruning. Lightly prune Hydrangea petiolaris because the majority of the plant’s flower buds are located toward the top. Trim the floral branches back to a pair of fresh blooms. If your plant has gotten too big, you might need to sacrifice the blossoms for a couple of years by rigorous trimming in the spring or autumn.
Trim Hydrangea seemannii and Hydrangea serratifolia to fit their space after they have flowered in the summer.
How to propagate Hydrangea petiolaris
Layering a climbing hydrangea in the spring is the simplest method of propagation. Choose a young, healthy branch that dips low or is long enough to be pinned to the ground. Remove the leaves from the stem using a knife or pair of secateurs, then make a shallow incision just below a bud on the most recent wood. This will help it take root. Utilize potting compost to amend the soil before pinning the bare piece of stem to the ground with a long, hooked wire. To make sure the stem will be stable for the growth season, water the area where you fastened it and cover the stem with a block.
Climbing hydrangeas can also be multiplied by taking softwood cuttings in the spring. Look for immature, non-flowering shoots with three pairs of leaves in the morning. Prepare cutting material right away for the greatest outcomes. Alternately, put them in a cool shed in a plastic bag. Shorten the stem of the cutting and remove the two sets of lower leaves. Just below a node, cut. Put the trimmings in a container of cutting compost. As long as the leaves don’t touch, more than one cutting may be planted in a container. Add water and a clear plastic bag on top. Keep them ideally in a greenhouse that isn’t heated. Plants should be potted as soon as you notice noticeable growth and kept in a shaded area.
Climbing hydrangeas: problem solving
It is normal for your plant to not develop much in the first few years—the plant needs time to establish itself. Poor growth could also be the result of a lack of water because climbing plants are frequently in a “rain shadow,” meaning that when it rains, it doesn’t benefit them because it doesn’t get to the base of the plant. Every spring, mulch the plant to help the soil retain moisture and to help it retain water during the summer’s dry weather.
no flowers It can take a few years for hydrangea petiolaris to bloom. A mature plant’s lack of blossoms may be the result of improper trimming. Pruning should be done in the summer immediately following flowering to give climbing hydrangeas ample time to grow flowering wood for the next year. Don’t prune the plant too severely.
This fungus infection is called leaf spot. It can happen when there isn’t much air movement when the weather is warm and humid. As soon as you notice any damaged leaves, remove them. When watering, make sure to hydrate the plant’s base and, if you can, make the area surrounding it more airy.
leaves with brown blotches and weak growth An bug that feeds on hydrangea sap is called a hydrangea scale. In extreme circumstances, it may result in leaf loss and poor growth. Early in the summer, you might see the eggs, which are encased in a white waxy substance. When fully grown, scale insects resemble brown lumps. If the issue is severe, spray an organic insecticide based on fatty acids or plant oils in July. Otherwise, populations will naturally be kept low by predators like birds.
What occurs if hydrangeas are not pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
How should hydrangeas be pruned before winter?
Mophead (Hydrangea macrophylla) and Oakleaf (Hydrangea quercifolia) set their flower buds for the next year shortly after finishing their summer blooms because they flower on old wood, according to Fine Gardening. Rarely do these kinds need to be severely pruned, and trimming them back for the winter stops them from blooming the next summer.
Instead, remove broken, crossed, or dead stems to thin them out once every five years in the summer, but before late summer and early fall buds form. Before winter, you can trim the dead hydrangea flowers off, but do so slightly below the flower head to avoid disturbing the bud development along the branch’s length.
Should I remove the brown blooms on my hydrangea?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.