All lilacs should generally be clipped right away in the spring after they have finished blooming. Lilacs set their flower buds for the following year immediately after the current year’s flowers have faded, therefore trimming later in the summer or fall will result in the removal of most or all of the blossoms for the following year. The larger common lilacs as well as the shorter or more “shrub like” cultivars are all subject to this timing guideline. While the “when” of lilac trimming is rather simple, the “how” is a little more difficult. For the time being, we’ll refer to lilac pruning as either maintenance pruning or rejuvenation pruning to keep things simple.
Can lilacs be severely pruned?
A: There are a number of potential causes for your lilac’s failure to bloom. The two most frequent culprits are insufficient sunlight and poor pruning. Lilacs (Syringa) should be planted in an area with at least six hours of direct, bright sunlight per day. They can withstand a wide range of moisture levels as long as they are grown in soil with good drainage. If your lilac is clipped at the wrong time of year, it might not blossom for another reason. Lilacs bloom in the spring on the growth from the previous year, and soon after, they begin to form the buds for the following year. Within a couple of weeks of the plant blooming, pruning must be done in order to prevent the removal of the buds for the next year. You can softly clip young lilacs to keep them in check, within boundaries, and flowering profusely. In order to revitalize older plants and increase flower production, a rigorous pruning almost to the ground may be necessary. A late freeze can harm flower buds on types that bloom early.
Lilacs have a tendency to mature into overgrown, leggy shrubs with minimal foliage at the bottom. When this occurs, it might be required to prune them to within 12 inches of the ground in order to completely rejuvenate them. When the shrubs are dormant in late winter, this should be done. Lilacs benefit from this repair, although their blooming cycle will be hampered for at least one season. Lilacs can receive a rejuvenation pruning over a two-year period to stop the interruption of bloom cycles. One year, hard prune half of the shrub’s stems; the following year, hard prune the remaining stems.
Lilacs do not consume a lot of food. Excessive fertilization, particularly nitrogen fertilizer, can frequently promote luxuriant vegetative growth at the expense of flower development. The number of blossoms won’t increase with fertilization. A lilac’s failure to bloom could potentially be due to its proximity to turf that receives frequent fertilization.
How much may a lilac shrub be pruned back?
Cutting no more than a third of the stems from a shrub should be the general guideline when pruning it. While a result, the plant will continue to thrive and grow new stems as the old ones bloom. Your aim is to grow a lilac bush with between eight and twelve stems, all between one and two inches in diameter, and of varying ages.
Prune Unsightly Features
Pruning should start with the removal of diseased, dead, and pencil-thin suckers and twiggy growth. Trim these all the way to the ground. These stems are typically handled by pruning shears or loppers.
Remove Any Stems Thicker Than 2 Inches in Diameter
By routinely removing entire old stems, you can keep your lilac from growing too tall. Removing only the tops of lengthy stems might cause the plant to take on an unusual, unnatural shape. A pruning saw could be essential for stems that are quite large. It can be difficult to handle thick lilac stalks.
Prune Remaining New Stems
Pruning the remaining new stems to an outward-facing bud will encourage your lilac to fill out more and develop a shrubby appearance. This entails trimming just past buds that point away from the plant’s core. A denser shrub will result from this technique’s increased branching.
What occurs if lilacs are not pruned?
It’s crucial to know when to prune lilac bushes. Most lilacs don’t need to be pruned until they are between 6 and 8 feet (2 and 2.5 meters) tall. Lilac plants should be pruned as soon as the flowering is finished. This gives new shoots plenty of time to grow before the upcoming blooming season. Lilacs can lose young, budding buds if they are pruned too late.
Early spring is the ideal time to prune lilac bushes or shrubs completely to a few inches above the ground. As long as there are still a few healthy shoots present, new shoots will continue to grow throughout the normal growing season. Remove any ugly shoots when the growing season is finished.
Lilac bushes’ health and bloom output depend on regular pruning. Lilacs are typically quite hardy, and with the right pruning, they will grow back bigger and better than before.
Does new or old wood produce lilac blooms?
What specifically prevents these traditional plants from blooming? Instead of focusing on just one theory, consider a number of potential causes for this issue, including (in addition to illnesses and pests):
- Pruning when it’s not necessary
- The flower buds die in the cold
- placing your lilacs in the incorrect location
- The shrub in question either isn’t old enough to generate flower buds or is too old to do so.
You’ll see that while reasons one and three point to the gardener having done something incorrect, arguments two and four point to no one having done anything incorrect.
Why does it matter what time of day you prune? Shrubs called lilacs produce flowers on rotting wood. This indicates that the flower buds for the upcoming spring’s blooming season have already been formed on the growth from the previous year. When this growth is pruned, the flower buds and, consequently, the blooms they would have produced, are lost. Because of this, it is recommended that you clip lilac bushes as soon as they finish flowering (before they have set bud for next year).
Click Play to Learn How to Prune Lilacs
Despite being a relatively cold-hardy plant, the common lilac (Syringa vulgaris) can suffer harm if a hard frost or freeze occurs just as the flower buds are about to open. As a result, that year’s flowers are lost. You can’t really stop it, so simply accept the loss and look forward to the blossoming twice as much the next year.
Where you put your lilac shrub matters a lot, just like it does with most other plants. Lilacs require full sunlight and prefer well-drained soil. If you made a mistake when you first put your plants on either of these fronts, you can be paying for it today by your lilac not blooming. However, there is a simple solution to the issue: move your shrub to a more favorable location.
Regarding the fourth reason, be aware that although though these bushes have a long lifespan, they do tend to produce fewer flowers as time passes. Implementing a rejuvenation pruning on your lilacs will solve this issue (do not expect immediate results, though). Sometimes, though, the converse is true: your plant may be too young to bloom. Allow some time.
Should lilacs be deadheaded?
The removal of spent flowers to encourage new blooming—deadheading—is a crucial part of lilac maintenance. Lilacs should be deadheaded as soon as the flowering is finished to allow the plants to grow robust, healthy buds that will flower vivaciously the following year. According to the University of Minnesota Extension, you can use a hand pruner, but larger plants could require a hedge trimmer. Only the dead blossom should be removed; the plant should still have two leaves.
According to the Chicago Botanic Garden, you should prune lilacs at the same time as you deadhead them since they set the blossoms for the following year quickly after flowering. By doing this, you can prevent damaging or removing the developing buds. Three to four years after planting, you should start pruning lilacs. It might be necessary to trim back overgrown lilacs to just a few inches above the ground. Winter is the ideal time to complete this. In this instance, it will take the shrub one or two growing seasons to start blooming once more.
How should a lilac that is too tall be pruned?
Annual pruning keeps lilacs under check. Cut it back to a pair of side shoots at the proper height if it’s a healthy shoot that’s just too tall. Deadheading. The plant’s energy is directed into new growth when you deadhead faded blossoms.
Is it possible to remove lilac bushes to the ground?
The lilac tree will resemble nothing more than a twig in the garden by the end of September. It shouldn’t be reduced to the ground, though. Despite the fact that lilac trees are known for their resilience, it will likely take several years before you see blossoms again because you cut off all the blossoming growth.
If your lilac tree is more mature and unruly, it may require more aggressive pruning and some chopping back; just make sure that it doesn’t take up more than a third of the tree.
How can an aged lilac bush be revived?
The common purple lilac is a hardy, dependable shrub that can grow up to 20 feet tall. Unfortunately, the lower, shady sections of lilac shrubs typically lose their leaves as they get older. Large, overgrown specimens as a result are frequently leggy and ugly. Pruning can restore or rejuvenate old, neglected lilacs. Home gardeners have two alternative pruning techniques to pick from.
Cutting the entire plant back to within 6 to 8 inches of the ground in late winter is one method of renewing a huge, overgrown lilac (March or early April). A significant number of shoots will sprout during the growth season as a result of this aggressive pruning. Select a few sturdy, robust shoots to construct the shrub’s framework, keeping a few of them, and cut off all the others at ground level in the late winter of the next year. To promote branching, head (clip) back the retained shoots to just above a bud.
Cutting back the overgrown shrubs over a three-year period is a second method for pruning mature lilacs. In late January, start the process by digging up and removing one-third of the big, old stems. The following year, trim out half of the remaining old stems (again in late winter). Additionally, trim out some of the recent growth. Keep a few healthy stems that are evenly spaced apart and cut off the rest. In the third year’s late winter, completely remove all of the old wood. It is also necessary to thin the fresh shoots more. This pruning technique should enable you to take pleasure in blossoms every spring because lilac wood must be three years or older before it blooms.
Within a few years, with the right pruning, an old, overgrown lilac can be converted into a robust, appealing shrub. Pruning should be a frequent component of the lilacs’ management regimen after they have been revived. By cutting a few of the oldest branches every three to five years, the shrub can be kept strong and healthy.
(This article, which first published in the Sunday edition of the Lincoln Journal Star Newspaper in February 2005, has since been amended. Consult the Terms of Use for details on how to copy this content and use any images or visuals.)
Can lilacs be pruned to preserve a small size?
One of the joys of spring is the luscious aroma of lilacs. The lilac bush, which blooms in late April or early May with clusters of tiny purple flowers resembling bunches of grapes, is a common sight in most communities.
These are primarily common lilac shrubs (Syringa vulgaris). Kris Bachtell, vice president of collections at the Morton Arboretum in Lisle, described it as “grandma’s lilac.” It is widely known.
He said that there are hundreds of cultivated types. Although there are cultivars with magenta, pink, and white blooms as well, the majority bloom in hues of purple. They are all resilient and enduring.
Despite being widely cultivated, common lilac is difficult for some gardeners to grow. Even if some newer types are more resistant to powdery mildew, older ones are frequently deformed by it in the late summer.
The plants, which are native to rocky Balkan hillside soil, require full light and well-drained soil. An older lilac’s blooming cycle may end if nearby trees have grown to shade it.
Lilacs require frequent renewal trimming to reduce their size and thin them out. According to Bachtell, this necessitates the yearly removal of certain elder stems as well as dead wood. Lilacs also frequently sprout suckers from their root systems, which may need to be cut back.
The common lilac can simply be too much of a shrub for smaller yards because it is a large shrub or small tree that grows 8 to 20 feet tall and almost as wide.
Fortunately, Bachtell says, there are alternatives. “He said that several other lilac species are somewhat smaller. “They might be more disease- and shade-tolerant than grandma’s.
Meyer lilacs (Syringa meyeri) can reach heights and widths of 6 to 8 feet. Even though it thrives in direct sunlight, it can tolerate some shade. The flower clusters are smaller but very fragrant, and they emerge a little later than those of the common lilac. Autumn causes the leaves to become yellow. Although there are various cultivars, Palibin is the most popular.
One cultivar, Miss Kim, of the Manchurian lilac (Syringa patula), is primarily recognized. On a plant that is 5 to 8 feet tall, it bears delightfully scented light purple blossoms that turn light pink as they age. In the fall, the ruffled leaves become purple-red. Compared to other garden lilacs, the plant is a little more resistant to powdery mildew.
Hybrid lilacs that rebloom in the late summer or early fall do so less profusely than they do in the spring. Bloomerang Purple (Syringa ‘Penda’), Bloomerang Dark Purple (Syringa x ‘SMSJBP7’), and Bloomerang Dwarf Pink (Syringa x ‘SMNJRPI’) are just a few cultivars in the Bloomerang line. They are all smaller than typical lilacs, although cultivar differences in size should be noted on the label.
According to Bachtell, pruning should be done in the first week or two after the spring shrub has stopped flowering if it’s necessary to keep a lilac untangled and at the right size. Pruning in the winter will destroy buds that might otherwise develop fragrant blooms since lilacs bloom from buds that were formed the previous year.
What distinguishes a lilac bush from a lilac tree?
Lilac bushes (also known as shrubs) are characterized by their numerous woody stems that emerge from the plant’s base. In contrast, the trunk of the majority of lilac trees is the only woody stem. However, your neighborhood garden center might also sell shrub lilacs that have been grafted onto a single stem to give them the appearance of miniature trees.
The choice between a lilac tree and a lilac bush is typically determined by the amount of space available. Lilac bushes come in a range of sizes and can be placed in more compact areas of a garden. A lilac tree requires space to reach heights of 20 feet and widths of 15 feet. Both require sunlight to bloom well.