Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practised.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigors trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
What happens if hydrangeas aren’t pruned back?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilising and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colours displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertiliser. Come on in, and we’ll show you where to go to develop your green thumb.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Can I prune my hydrangea right now?
Hydrangeas with mopheads and lacecaps (Hydrangea macrophylla) bloom on the growth from the previous year. They defy the generalisation that shrubs that produce their flowers on the growth from the previous season should be clipped after flowering. The optimal time to prune hydrangeas is in the spring because of the way their stems are built. This is due to the stems’ cork-like, as opposed to woody, nature, which allows them to store enough moisture during the winter for this to freeze in cold temperatures. The stems and their buds may freeze if they are clipped in the fall, following flowering. The stems and their new buds will be better protected if the old flowers are left on the plant throughout the winter, until the severe frosts have passed. These buds will open as the sap begins to rise in the spring, and many of them should go on to bear blooms the following year.
How much should hydrangeas be pruned back in the fall?
Trimming season for hydrangeas that bloom on new wood runs from late fall through early spring. This group includes smooth and peegee forms, which function well whether they are pruned lightly, to the ground, or not at all. In order to maintain a compact stature and luxuriant flowering, Peegee hydrangeas are frequently pruned into trees with one or two main stems that are between 15 and 30 feet tall.
Smooth hydrangeas can be pruned all the way to the ground; however, the more frequently they are cut, the less able their stems are to withstand the weight of their huge blooms. Smooth hydrangeas grow in mounds that are 3 to 6 feet tall and wide. When the plants are pruned to leave between 18 and 24 inches of growth, a woody base forms that helps the stems support the pompom blooms more effectively.
How are hydrangeas prepared for the winter?
Protecting flower buds is the aim of winter hydrangea care. The simplest approach is to pile 12 inches or so of mulch made of chopped-up leaves or bark around the base of the plant. After the ground freezes in the late fall, set the mulch pile there. Plants can then be exposed in the spring, when the temperature starts to stay above freezing.
Should I remove the brown blooms on my hydrangea?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favour by deadheading because this strengthens and makes plants healthier.
Can I prune my hydrangeas all the way down?
Cone-shaped flowers of the oakleaf hydrangea bloom in whites and creams before fading to red later in the season. its deeply cut leaves, which resemble oak tree leaves. Sizes of the several varieties range from the 2 tall “Sike’s Dwarf” to the 8 tall “Alice.” Our favourites are “Snow Queen,” “Pee Wee,” and “Munchkin.”
This hardy shrub does well in both full sun and full shade. Similar to the panicle hydrangea, we advise staying away from really hot exposures. In zones 5 to 9, the hydrangea quercifolia is hardy.
Pruning Oakleaf Hydrangea
On old wood, or the growth from the previous season, H. quercifolia blooms. A healthy or overgrown oakleaf hydrangea doesn’t require pruning. Take out the dead flower heads that are immediately beneath the bloom if you want to make it look nicer.
If your oakleaf hydrangea is quite old and woody, remove a couple of the thickest, oldest stems in the early spring all the way to the ground to promote some new growth. You’ll stress the plant and miss out on a full season of blooms if you chop the entire plant down to the ground.
What are hydrangeas used for in the fall?
Maintaining your hydrangea can greatly impact its blooms the next year. When given enough time and the right care, hydrangeas are resilient and can recover from virtually anything.
See our comprehensive growth guide for hydrangeas here after reading the fall maintenance advice below!
Because some hydrangea kinds do not like to be clipped in the fall, it is crucial to first identify your variety.
If you have hydrangeas in your garden, you should be aware that there are two different varieties. Both types develop blossom buds, one on new wood and the other on old wood. If a stem has remained on the plant since the previous summer, it is referred to as old wood. Stems that form this season are considered new wood. The majority of hydrangea species that are found in gardens are old wood bloomers, including as Mophead, Big Leaf, Lacecap, and Oakleaf types. Check your variety once more at the neighbourhood garden centre.
Hydrangeas can grow for many years without being pruned, but it’s time to cut them if they become unkempt, take over a portion of the garden, or stop producing new growth. But when should they be pruned?
After the summer blooms on old wood bloomers or fall blooming hydrangeas, prune them. Old, woody hydrangeas that are pruned in the fall will not bloom the following season.
Hydrangeas that bloom in the summer or those that do so on fresh wood are clipped in the fall, after their flowering season has ended.
Early in the season, hydrangeas are brilliant and colourful, but they are difficult to preserve after being cut. Once they begin to dry on the bush, they are simpler to maintain.
Your plant will have weak, wispy growth near the bottom. Reduce them. They will consume energy that could be used by your plant to produce blossoms.
On your stems, look for any dead stumps. They won’t have sprung any buds or new wood from the original old wood. To totally remove the dead stumps, cut them to the ground at the base. This will give the new growth below a chance to flourish.
To make way for new buds to emerge, old and dead blossoms must be eliminated. To promote flowers for the following summer, remove the flower head immediately above the first few leaves.
Observe the plant’s shape from a distance. The shrub should be pruned into the shape you desire; a spherical is the traditional shape, but you can prune it however you like!
Clean up any leftover debris from the plant’s foundation. Make sure your soil is devoid of all weeds, dead flowers, and leaves.
Feed your blue hydrangeas with Holly-tone to maintain acidic soil and vibrant flowers. Alternatively, choose Flower-tone.
Feed your hydrangeas two to three times each week from spring till fall for the greatest results.
Your hydrangeas will remain healthy and vibrant for many years if you follow these simple instructions.
What are hydrangeas used for in the winter?
One of the most adored Southern belles in the garden is the hydrangea. There are many reasons to enjoy shrubs; they tolerate shade, come in a range of colours, and can add interest all year long. In addition, hydrangeas typically require little maintenance and thrive in challenging growth environments.
Hydrangeas in Winter
Mulch over the hydrangeas in the winter to protect them. Leave faded blossoms alone to add interest in winter.
You may be wondering how to ensure that your shrubs remain secure over the winter due to the unpredictable nature of the weather. I am aware that I am in Georgia. So I asked Ryan McEnaney of Bailey Nurseries the most important winter care issues for hydrangeas, and fortunately, the answers are straightforward:
Is there a time or temperature when it’s “too late” to winterize hydrangeas?
Any form of protection is beneficial. Winter months bring a wide range of temperatures, so if you’ve already experienced any really chilly spells, some harm may have already been done. Despite this, continue to preserve it to ward off any potential threats in the months to come.
Will mulch prevent plants from heaving? Is there a type of mulch that is better for winterizing plants? When spring returns, do I need to remove the mulch?
Plants in the ground and in containers benefit greatly from mulch during the winter. Beyond providing general security, the mulch’s role is to establish an environment that is more consistent with what is going on outside. Temperatures can change from -10 to 30 degrees in some areas of the nation within a week or two. As a result, the root system is disrupted as water molecules in the ground freeze (contract) and then defrost (expand) (heaving). Mulch aids in minimising those abrupt alterations to safeguard the plants. We advise using wood mulch, oak leaves, or pine straw.
To prevent damage from late spring, wait until after your last frost date to [remove to the mulch]. However, don’t wait too long as heat can develop moisture, which can cause the stems to rot in the absence of air flow.