These are your macrophylla hydrangeas, also known as mophead and lacecap, which come in purple, pink, and blue. They also include hydrangeas with oak-shaped leaves. While reblooming kinds flower twice, some cultivars only bloom once per season on stems from the previous year (old wood).
The initial set of hydrangea blossoms should be deadheaded as soon as they start to turn brown and dry. Cut the stem immediately above the first set of leaves and below the flower head. When this second set starts to fade, you can deadhead once again for reblooming varieties, but only until about mid-August. Your hydrangeas will then produce buds for the flowers of the next year; you don’t want to unintentionally cut these off. After the summer has ended, dried flower heads can remain on the shrubs to add visual interest over the winter.
Should I prune my hydrangea’s dead heads?
To keep your hydrangeas looking their best and promote the development of new flowers, deadhead regularly during the blooming season.
But in mid- to late-fall, stop deadheading hydrangea shrubs, leaving any spent blooms in situ. This not only adds beauty to the winter landscape but also guarantees that the buds that will bloom the following spring are not removed.
What happens to hydrangeas if I don’t deadhead them?
Deadheading too-tall hydrangeas can occasionally be challenging. Your other option is to keep them on if you don’t have the skills to reach spent flowers or all of the spent blooms. And you can do that without suffering too much harm.
Simply omit deadheading hydrangeas, and your plant won’t suffer. At least nothing major enough to need worrying about.
Your hydrangea might not produce as many or as large of blooms as it would have if the spent blooms had been removed. It will nevertheless continue to bloom.
Having said that, you can think about pruning hydrangeas that have gotten too tall in order to make them smaller and easier to handle.
This will make it simpler for you to maintain the tidy appearance of your hydrangeas. Additionally, it will make it simpler to remove spent blooms from plants and promote future blooms with greater vigour.
When should hydrangeas be pruned?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practised.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigors trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Do you need to remove withered hydrangea blooms?
Myers advises leaving the dried blossoms on your hydrangeas if you’re looking for an easy way to spice up your winter yard. Bigleaf hydrangeas produce their final rush of flowers in the fall, so to enjoy the dried blossoms all winter long, stop deadheading at that time. To aid in the production of healthy buds in the spring, these can be removed.
Should I remove the spring blooms of my brown hydrangea?
Pruning is not typically thought of as one of the many gardening activities that may be done in the fall, despite the fact that there are several. It can be difficult to cultivate hydrangeas successfully in New Hampshire, and if you want your plants to blossom, there is frequently very little room for error in pruning.
Wait until Spring to prune hydrangeas
In New Hampshire, hydrangeas come in a variety of kinds, and each one has quite distinct growth patterns and pruning needs. Some plants only produce flowers on fresh growth, while others mostly produce flower buds on older wood. In any case, it is better to postpone all hydrangea pruning until spring. Hydrangeas, as with all other trees and shrubs, go dormant in the fall. Not much new growth is produced by them until the next spring. As new growth is more vulnerable to harsh cold at the location of wounds, plants that have been trimmed now run a higher risk of winter damage. Additionally, fall pruning may lessen the quantity of June blooms.
Considerations for pruning hydrangea species commonly grown in New Hampshire gardens
The gigantic blue mopheads or lacecaps known as bigleaf hydrangeas (Hydrangea macrophylla), which are familiar to most gardeners, form their flower heads at the tips of stems on old wood from the previous year. Although lower buds along the stem have the capacity to grow blooms as well, the hydrangea’s blossoming potential is decreased if those buds are died or damaged throughout the winter. Wait until new growth sprouts in the spring before pruning your bigleaf hydrangeas. Approximately 1/4 inch above the first group of live buds, prune the plant. A hint: the interior of living stems will be green, whereas the interior of dead stems will be brown. Cut completely dead stems flush with the base.
The three other hydrangea species that are frequently planted in Fresh Hampshire—oakleaf (H. quercifolia), panicle (H. paniculata), and smooth—all bloom on new growth. Before the emergence of the leaves in the late winter and early spring, remove wasted flowers and prune the plant to improve its general structure and habit.
In conclusion, there are a tonne of other activities you can engage in to stay occupied in the garden during fall. Save the spring for hydrangea pruning.
How are hydrangeas prepared for the winter?
Protecting flower buds is the aim of winter hydrangea care. The simplest approach is to pile 12 inches or so of mulch made of chopped-up leaves or bark around the base of the plant. After the ground freezes in the late fall, set the mulch pile there. Plants can then be exposed in the spring, when the temperature starts to stay above freezing.
How can I encourage my hydrangea to bloom more?
Early spring or mid-July through late summer are the blooming seasons for hydrangeas. The methods for extending hydrangea blossoms’ life and producing more of them are discussed below.
Plant the hydrangea where it will receive morning light and afternoon shade, keep the soil continuously moist, and treat it in the spring with a fertiliser that is well-balanced to encourage more flowers. To encourage more blossoms, don’t prune your hydrangea too frequently. Hydrangeas bloom on the growth from the previous year.
Continue reading to find out how to lengthen the time that your hydrangea blooms as well as my personal pick for the best fertiliser for hydrangeas to enhance blossoming.
What makes deadheading and trimming distinct from one another?
Fortunately, all you need for this project are some clippers, gloves, and a pail to gather your cuttings. I really appreciate this multi-snip tool that I discovered last spring for this gardening task because deadheading is typically a little more delicate than full-on trimming. Use anything you have, including regular bypass pruners.
Since I normally go through 1-2 pairs of gloves in a season (due to holes in the fingertips…), I bought these gloves last spring. I was impressed by how lightweight but robust they are. Since I have spare pairs accessible for any garden assistance I may hire, I haven’t even pierced the first pair’s fingertips yet.
General Pruning-Deadheading Tips
(Note: pruning refers to removing any portion of the plant, from large to small – what we’re doing in the summer is small, just cutting back some and trimming.) Deadheading is the practise of removing wasted flowers from plants.
The majority of your perennials and shrubs that have bloomed or are still blooming only require that you “deadhead,” or cut off the spent blossoms. To determine where to cut the dead flower, consider the following two factors:
- Like this buddleia in the picture above, you can prune it back to the first sign of new growth. This small variety (Lo & Behold ‘Ice Chip’) will continue to bloom into the fall thanks to those new stems on the sides that will bear additional flowers.
- OR, you might prune it more, taking further cuts to keep it under control for the planting area. To prevent the plant from getting too huge or to assist it maintain a more aesthetically acceptable form, continue to look for new growth, but further down on the stems.
You’ll also find plants with dead flower stalks and leaves, like the daylily in this image. Your garden will look better into the fall if you take the effort to remove the browning, dead leaves and deadhead the flower stalks. The majority of daylilies have finished flowering, but they will continue to provide grass-like leaves as a backdrop to the garden. However, some types, like Stella d’Oro, will continue to bloom if the dead stalks are removed.
Shearing the plant back is the simplest approach to get rid of all the wasted flowers on perennials with tiny blooms, like hardy geranium. Once the majority of the wasted blooms have been removed from the plant, grab pieces with your hand and chop the entire part off. For a week or two, it won’t look its finest, but it will soon sprout new growth and produce more blooms.
The heavy blooms on mature hydrangeas may be causing the plant to bend and dip, exposing the crowns. It’s the ideal moment to remove the oldest blossoms, especially those at the bottom, so that the leaves can reposition themselves. If you cultivate a reblooming hydrangea, such as Endless Summer, it will keep producing new flowers for you.
The act of gathering all the blooms and decorating the home with vases of fresh flowers after hydrangea trimming in the summer is the greatest part!
You’ve undoubtedly been deadheading individual rose blossoms as they appeared over the previous few months, but your shrub will bloom more quickly if you trim back to a five-leaf junction, where new growth and blooms will develop.
Additionally, you should prune back to new growth to remove any damaged leaves and stems (like I obviously have on some of my roses – if you live in the Pacific Northwest, every rose will get blackspot…). This not only improves the appearance but also helps prevent disease from spreading to the new growth.
Have any advice to offer? Have you come across any plants that benefit from mid-season deadheading, shearing, or pruning? Comment below and let me know!
To get you thinking about fall, check out these additional posts from our Tuesdays in the Garden group!
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
How much should hydrangeas be pruned back in the fall?
Trimming season for hydrangeas that bloom on new wood runs from late fall through early spring. This group includes smooth and peegee forms, which function well whether they are pruned lightly, to the ground, or not at all. In order to maintain a compact stature and luxuriant flowering, Peegee hydrangeas are frequently pruned into trees with one or two main stems that are between 15 and 30 feet tall.
Smooth hydrangeas can be pruned all the way to the ground; however, the more frequently they are cut, the less able their stems are to withstand the weight of their huge blooms. Smooth hydrangeas grow in mounds that are 3 to 6 feet tall and wide. When the plants are pruned to leave between 18 and 24 inches of growth, a woody base forms that helps the stems support the pompom blooms more effectively.