Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practised.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigors trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Should hydrangeas be pruned back during the winter?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilising and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colours displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertiliser. Come on in, and we’ll show you where to go to develop your green thumb.
Can hydrangeas be pruned at any time?
The general health and vigour of hydrangea plants depend on knowing how to prune hydrangea bushes according to their specific variety and individual needs. Different pruning methods are used for hydrangeas.
- Mophead and lacecap forms of the Big Leaf Hydrangea (H. macrophylla) are the most widely cultivated types. It can often be difficult to predict when to prune hydrangeas. They are typically pruned in the late summer, after the blooming has finished. While some prune them in the spring, other people do it in the fall. They should be fine as long as you don’t clip any stems that haven’t blossomed and instead leave healthy buds uncut. Cut or deadhead wasted blooms and stems to the last bud and prune weak stems to the ground.
- The leaves of the Oakleaf Hydrangea (H. quercifolia) are shaped like an oak leaf. Since their vibrant fall foliage is frequently a welcome sight in autumn, these hydrangeas are typically clipped in the early spring. For added appeal, many people also choose to leave the flower heads on all winter.
- Panicle, also known as Pee Gee Hydrangea (H. paniculata), typically blooms on the growth of the current growing season. In order to prepare them for summer blooming, they are typically clipped in late winter or early spring. They can also be clipped in the autumn. Due to its upright growth pattern, this variety of hydrangea can easily be shaped into a tree form.
- Following their spring flowering, Annabelle Hydrangea (H. arborescens) are typically clipped in the summer. Some individuals choose to cut them back to the ground in the late winter or remove any dead growth in the early spring just before they bloom.
- Pruning climbing hydrangeas (H. anamala) is frequently not necessary. Such hydrangeas can be clipped in the fall after the flowering has finished because the side shoots are what generate the flowers. Trim shoots to the final sound bud.
There is no set rule for when to prune hydrangea shrubs. Remember that hydrangea can be left alone unless the circumstance requires pruning, which is not always the case. Healthy hydrangea plants can be kept up by removing spent blossoms and dead stems each year.
Are hydrangeas required to be pruned annually?
Remove crossed and dead stems, then prune the plant into shape. Pruning does not have to be done annually. These varieties can be encouraged to grow into trees. The trunk and primary branches must be developed carefully by pruning.
How should hydrangeas be pruned in the fall?
Maintaining your hydrangea can greatly impact its blooms the next year. When given enough time and the right care, hydrangeas are resilient and can recover from virtually anything.
See our comprehensive growth guide for hydrangeas here after reading the fall maintenance advice below!
Because some hydrangea kinds do not like to be clipped in the fall, it is crucial to first identify your variety.
If you have hydrangeas in your garden, you should be aware that there are two different varieties. Both types develop blossom buds, one on new wood and the other on old wood. If a stem has remained on the plant since the previous summer, it is referred to as old wood. Stems that form this season are considered new wood. The majority of hydrangea species that are found in gardens are old wood bloomers, including as Mophead, Big Leaf, Lacecap, and Oakleaf types. Check your variety once more at the neighbourhood garden centre.
Hydrangeas can grow for many years without being pruned, but it’s time to cut them if they become unkempt, take over a portion of the garden, or stop producing new growth. But when should they be pruned?
After the summer blooms on old wood bloomers or fall blooming hydrangeas, prune them. Old, woody hydrangeas that are pruned in the fall will not bloom the following season.
Hydrangeas that bloom in the summer or those that do so on fresh wood are clipped in the fall, after their flowering season has ended.
Early in the season, hydrangeas are brilliant and colourful, but they are difficult to preserve after being cut. Once they begin to dry on the bush, they are simpler to maintain.
Your plant will have weak, wispy growth near the bottom. Reduce them. They will consume energy that could be used by your plant to produce blossoms.
On your stems, look for any dead stumps. They won’t have sprung any buds or new wood from the original old wood. To totally remove the dead stumps, cut them to the ground at the base. This will give the new growth below a chance to flourish.
To make way for new buds to emerge, old and dead blossoms must be eliminated. To promote flowers for the following summer, remove the flower head immediately above the first few leaves.
Observe the plant’s shape from a distance. The shrub should be pruned into the shape you desire; a spherical is the traditional shape, but you can prune it however you like!
Clean up any leftover debris from the plant’s foundation. Make sure your soil is devoid of all weeds, dead flowers, and leaves.
Feed your blue hydrangeas with Holly-tone to maintain acidic soil and vibrant flowers. Alternatively, choose Flower-tone.
Feed your hydrangeas two to three times each week from spring till fall for the greatest results.
Your hydrangeas will remain healthy and vibrant for many years if you follow these simple instructions.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
How should I get my hydrangeas ready for the winter?
Protecting flower buds is the aim of winter hydrangea care. The simplest approach is to pile 12 inches or so of mulch made of chopped-up leaves or bark around the base of the plant. After the ground freezes in the late fall, set the mulch pile there. Plants can then be exposed in the spring, when the temperature starts to stay above freezing.
Should I remove the brown blooms on my hydrangea?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favour by deadheading because this strengthens and makes plants healthier.
What occurs if hydrangeas are not deadheaded?
Deadheading too-tall hydrangeas can occasionally be challenging. Your other option is to keep them on if you don’t have the skills to reach spent flowers or all of the spent blooms. And you can do that without suffering too much harm.
Simply omit deadheading hydrangeas, and your plant won’t suffer. At least nothing major enough to need worrying about.
Your hydrangea might not produce as many or as large of blooms as it would have if the spent blooms had been removed. It will nevertheless continue to bloom.
Having said that, you can think about pruning hydrangeas that have gotten too tall in order to make them smaller and easier to handle.
This will make it simpler for you to maintain the tidy appearance of your hydrangeas. Additionally, it will make it simpler to remove spent blooms from plants and promote future blooms with greater vigour.
When and how should hydrangeas be pruned?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the centre of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterise hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.