Maintaining your hydrangea can greatly impact its blooms the next year. When given enough time and the right care, hydrangeas are resilient and can recover from virtually anything.
See our comprehensive growth guide for hydrangeas here after reading the fall maintenance advice below!
Because some hydrangea kinds do not like to be clipped in the fall, it is crucial to first identify your variety.
If you have hydrangeas in your garden, you should be aware that there are two different varieties. Both types develop blossom buds, one on new wood and the other on old wood. If a stem has remained on the plant since the previous summer, it is referred to as old wood. Stems that form this season are considered new wood. The majority of hydrangea species that are found in gardens are old wood bloomers, including as Mophead, Big Leaf, Lacecap, and Oakleaf types. Check your variety once more at the neighborhood garden center.
Hydrangeas can grow for many years without being pruned, but it’s time to cut them if they become unkempt, take over a portion of the garden, or stop producing new growth. But when should they be pruned?
After the summer blooms on old wood bloomers or fall blooming hydrangeas, prune them. Old, woody hydrangeas that are pruned in the fall will not bloom the following season.
Hydrangeas that bloom in the summer or those that do so on fresh wood are clipped in the fall, after their flowering season has ended.
Early in the season, hydrangeas are brilliant and colorful, but they are difficult to preserve after being cut. Once they begin to dry on the bush, they are simpler to maintain.
Your plant will have weak, wispy growth near the bottom. Reduce them. They will consume energy that could be used by your plant to produce blossoms.
On your stems, look for any dead stumps. They won’t have sprung any buds or new wood from the original old wood. To totally remove the dead stumps, cut them to the ground at the base. This will give the new growth below a chance to flourish.
To make way for new buds to emerge, old and dead blossoms must be eliminated. To promote flowers for the following summer, remove the flower head immediately above the first few leaves.
Observe the plant’s shape from a distance. The shrub should be pruned into the shape you desire; a spherical is the traditional shape, but you can prune it however you like!
Clean up any leftover debris from the plant’s foundation. Make sure your soil is devoid of all weeds, dead flowers, and leaves.
Feed your blue hydrangeas with Holly-tone to maintain acidic soil and vibrant flowers. Alternatively, choose Flower-tone.
Feed your hydrangeas two to three times each week from spring till fall for the greatest results.
Your hydrangeas will remain healthy and vibrant for many years if you follow these simple instructions.
Do all hydrangeas require a fall pruning?
Only prune these hydrangeas in the summer after bloom, not in the fall. In August and September, old wood hydrangeas begin to form their bloom buds for the following year. It is advisable to delay pruning your hydrangeas until the following year if you don’t do it right away. If not, there won’t be any blossoms the next spring.
In the fall, how far back should hydrangeas be pruned?
Trimming season for hydrangeas that bloom on new wood runs from late fall through early spring. This group includes smooth and peegee forms, which function well whether they are pruned lightly, to the ground, or not at all. In order to maintain a compact stature and luxuriant flowering, Peegee hydrangeas are frequently pruned into trees with one or two main stems that are between 15 and 30 feet tall.
Smooth hydrangeas can be pruned all the way to the ground; however, the more frequently they are cut, the less able their stems are to withstand the weight of their huge blooms. Smooth hydrangeas grow in mounds that are 3 to 6 feet tall and wide. When the plants are pruned to leave between 18 and 24 inches of growth, a woody base forms that helps the stems support the pompom blooms more effectively.
Should hydrangeas be pruned back during the winter?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
How are hydrangeas prepared for the winter?
Protecting flower buds is the aim of winter hydrangea care. The simplest approach is to pile 12 inches or so of mulch made of chopped-up leaves or bark around the base of the plant. After the ground freezes in the late fall, set the mulch pile there. Plants can then be exposed in the spring, when the temperature starts to stay above freezing.
How are hydrangeas prepared for winter?
Winter winds and cold temperatures both have the potential to be fatal. This catch-all phrase simply denotes plant dying over the winter. The plant may perish due to the low winter temperatures or from drying out brought on by the winds.
Since hydrangeas become dormant in the winter, winter damage to hydrangeas can not become apparent until spring. If your hydrangea doesn’t produce any green shoots in March or April, it could be your first indication of harm.
Protecting the shrubs from winter’s wrath is necessary to avoid winter kill in hydrangeas, which includes the young buds on the plants. Laying down a heavy layer of mulch over hydrangeas’ root zone is a wonderful place to start with winterizing them. For this, straw works wonderfully.
Use a wire cage to enclose the shrub or construct a cage around it using sturdy posts and chicken wire for even better protection. Wrap the cage in burlap or insulating material. Additionally, you should give the plant a lot of water right before the ground freezes.
Which month do you prune back hydrangeas?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
What are hydrangeas used for in the winter?
Stakes can be used to create a frame around the plant to protect it throughout the winter. To create a cage, encircle the stakes with chicken wire. Pine needles and/or leaves should be stuffed inside the cage to completely insulate your plant.
Because they do not settle as quickly as other materials, oak leaves perform nicely. As the insulation settles during the winter, keep a bag of leaves from your fall leaf raking pile to fill the cage.
As you fill the cage, take care not to snap off the ends of the branches because if you do, it will all be for nothing and you won’t have those magnificent blossoms the next summer.
How much of a winter pruning should be done on hydrangeas?
The ‘Endless Summer’ cultivar of Hydrangea macrophylla is an exception to the old wood pruning rule. On old and new wood, these hydrangeas bloom. On old wood, the season’s first blooms appear, while on new wood, late summer or fall blooms follow. At any moment, remove dead and damaged timber. After the last flush of blooms has finished flowering, trim the stems down by no more than one-third of their height to regulate the size and shape of this hydrangea.
Do you remove hydrangea dead heads?
Because hydrangea blossoms are so large, deadheading a hydrangea can help the plant focus energy on other, more crucial aspects of its growth. To promote new blossoms and keep your plant appearing healthy, you should continue this approach throughout the flowering season. The time of year determines the best way to deadhead hydrangea blossoms.
You should cut the wasted blossoms with a long stem still attached if it’s before August. Look at the stem’s junction with the larger branch; there ought to be several little buds there. Make sure to keep the buds whole when trimming the stem back as short as you wish.
The plant is probably developing new buds along the stems in anticipation of the following spring if it is August or later. Check the area between each set of leaves as you work your way down the stem from the faded bloom. You should see buds at the first or second pair of leaves. Offset the spent bloom far above those buds with a knife.
Carry a cloth that has been dipped in denatured alcohol while you work. To stop disease from spreading throughout the bush, wipe your pruners clean with the rag in between cuts.
When and how should hydrangeas be pruned?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.