These wonderful plants will fill your yard with delicious scent.
When the lilacs begin to blossom, it is a solid indicator that spring has arrived for good. While many people only have a limited knowledge of common lilac (also known as French lilac) shrubs that can reach a height of 15 feet or more, there are now a lot more options available than there were fifty years ago. Some varieties that rebloom enhance the garden’s appeal the entire growing season.
How to Choose Lilacs
The common lilac is what you will most likely find when you go plant shopping. This traditional plant comes in a variety of cultivars and variations, each of which yields fragrant spring flowers in pink, purple, white, or even combinations of those hues. Common lilacs are typically the most fragrant variety of lilac and can grow to be rangy and large.
Rebloomers have arrived in the garden center thanks to recent introductions of hybrids between the common lilac and other shrub-type lilacs. Some of these more recent types are a little less fragrant, but they also tend to be smaller, bloom more frequently throughout the growing season, and have fewer powdery mildew issues.
The tree lilac is another common variety of lilac. It can grow to a height of around 20 feet and blooms with cream-colored flowers in the middle of the summer. Though it doesn’t require much trimming, keep in mind that the tree lilac is a tree, not a shrub.
Where to Plant Lilacs
Lilacs should be planted in full light (at least 6 to 8 hours per day), as too much shadow will prevent them from blooming. Lilacs also prefer moist, well-drained soil that is slightly alkaline.
When to Plant Lilacs
Before the ground freezes in the late fall is the ideal time to plant lilacs. After the earth thaws in the early spring, that is the next ideal period to plant. Lilacs will likely need to be planted as soon as you can locate them at the garden center, which is great; if you choose to do so during a warmer season, they might require additional watering.
How to Prepare the Soil for Planting Lilacs
A soil test should be performed prior to planting since lilacs thrive in slightly alkaline (6.5 to 7.0 pH), moist, well-drained soil that is high in organic matter. Lime must be added to raise the pH if it is below 5.5. It’s time to get the soil ready when you’ve obtained the ideal pH. Improve individual planting holes by mixing Miracle-Gro Garden Soil for Trees & Shrubs in a 50:50 ratio with the natural soil to give lilacs a nutrient-rich start. Iron and phosphorus are also present in this garden soil to promote root development and ward off leaf fading.
Which fertilizer is ideal for lilacs?
Lilac plants don’t require a lot of food or fertilizer. A 10-10-10 fertilizer mixture applied yearly in the early spring is what we advise. (The amounts of nitrogen, phosphorus, and potassium, or NPK as they are popularly known, are represented by the digits 10-10-10 in the formula.) Early spring fertilization of lilacs with a high phosphorus solution encourages blossoming.
Coffee grounds and grass clippings are also excellent sources of nitrogen. Use in moderation since an excess of nitrogen in the soil can lead to subpar blooms. The ideal soil conditions for lilacs are slightly alkaline (6.5–7.0 pH), wet, and well-drained. The soil may become more alkaline by adding bone meal to it. Use Miracle-Gro Shake ‘n Feed Flowering Trees & Shrubs Plant Food in the spring if you decide to feed your plant. Last but not least, lilac plants dislike acidic soil. Epsom salts can be used to encourage blossoming while the plant is dormant.
How can I improve the bloom of my lilacs?
Although there are several potential solutions to this problem, pruning might hold the key. Lilacs blossom on the growth from the previous year, so it’s crucial to cut them as soon as the spring blooming is through. Pruning a lilac in the summer, fall, or winter may result in the removal of buds that would have bloomed the following spring.
After the spring bloom, try to only lightly prune the plant. If you want to avoid delaying the next bloom by drastically pruning your lilac shrub, simply remove the oldest and heaviest branches and trim the inner branches to make room for sunshine to enter the bush.
Take into account the age of your lilac bush, which by this point may have evolved into a tree. On younger wood, lilacs bloom at their best. If the majority of your lilac’s structure is old, decayed wood, blooms may be scarce. An elder lilac can require rejuvenation pruning, followed by a two- to three-year wait before it can bloom fully again.
Should lilac bushes be fertilized?
Lilac bushes respond well to fertilizer made from bone meal. This is as a result of increased soil alkalinity. It is a simple natural plant food that the lilac can consume.
Lilac fertilization isn’t necessarily required until the first and second years after planting. To sweeten the soil and prevent too much acidity, they could be fertilized with superphosphate and limestone when they are planted.
You can exclude standard fertilizer mixtures if the soil has the right balance and has a lot of organic matter. The only bushes that will truly benefit from annual feeding are those planted in poor soil. When you do feed the plants, use a 5-10-10 ratio. Around the plant’s root zone, distribute 1 cup (237 ml) of granular food evenly, and then water the soil.
How can you assist a lilac bush in need?
You might believe your lilac is dying if you see it becoming a little frail or worn out, or if it only produces a few little flowers in the spring. Often, all a plant needs to produce robust new growth and abundant, fragrant blossoms is some hard pruning and some feeding. Rejuvenate a lilac bush by working with it just after bloom, when the blooms have dried up and are spent.
To get to the grass or soil layer, rake away any debris, dead branches, or fallen leaves from the lilac’s base.
Pick three to five of the lilac’s strongest branches after surveying the entire plant. Follow the branches you’ve chosen to the plant’s base, where you can flag each sturdy branch by gently tying a rope or ribbon around its base.
Use hand pruners or a handsaw if needed to make a clean, horizontal cut across all of the unflagged branches that are about an inch off the ground. To prevent breaking off any limbs you want to maintain, carefully pull the trimmed branches away from the lilac.
- You might believe your lilac is dying if you see it becoming a little frail or worn out, or if it only produces a few little flowers in the spring.
From the remaining branches, take off your sting or ribbons. Fertilize the lilac around its base according to the dosage and application guidelines provided by the manufacturer.
Mulch should be applied in a ring around the lilac’s base that is no deeper than 3 inches and no wider than 3 feet. New sprouts won’t be able to emerge if the mulch is too deep.
If there is a drought or excessive heat in your area during the summer, make sure the plant is well-watered. Lilacs require good drainage, but they don’t fare well in dry soil.
The next spring, watch for buds to start swelling on the branches. Reapply fertilizer right before flowering and once more after flowering is finished. This is how you should fertilize each year.
- From the remaining branches, take off your sting or ribbons.
- The next spring, watch for buds to start swelling on the branches. Reapply fertilizer right before flowering and once more after flowering is finished.
Maintain your lilac by doing minimal annual pruning to remove wasted flowers and only every three to five years to remove old and dead branches.
Avoid letting the feed come into contact with the branches when applying fertilizer to the area around the plant, whether it be granular or water-soluble.
How can you promote the growth of lilacs?
3. Take the plant out of its pot and place it in the hole. Make sure the top of the root ball is about an inch or more above the soil surface.
4. Apply the soil mixture all the way around the root ball, pressing it down firmly.
5. Take a long drink.
6. Mulch the area you just planted to a depth of 2 inches, being careful not to pile mulch up against the base of the plant. This will help keep the soil moist and prevent weeds from sprouting by denying them access to sunlight.
How to Water Lilacs
After planting, monitor your plants frequently, and water them once or twice a week, or anytime the top inch of soil becomes dry. While watering, count to 10 to make sure you’re providing each lilac plant with enough moisture. (If the plant becomes too dry, the leaves will start to droop.) You can reduce watering to every other week once plants have been planted and have had a few months to establish themselves. Lilacs won’t require additional water during the second growing season or later unless there hasn’t been rain in your location for a month or more.
How to Feed Lilacs
Lilacs should be fed Miracle-Gro Shake ‘n Feed Flowering Trees & Shrubs Plant Food after they have bloomed in the spring to encourage the development of robust roots. This plant food is jam-packed with nutrients for your plants, including kelp, earthworm castings, feather meal, and bone meal. These ingredients nourish soil bacteria, which in turn break down organic matter into nutrients for your plants.
How to Help Prevent Disease Problems with Lilacs
Powdery mildew is the main problem with lilacs, especially common lilacs. What’s the best approach to prevent this? Purchase and plant lilac cultivars that resist powdery mildew (check the plant tag or online description). Lilacs benefit from being planted in areas with good airflow. This fungus disease won’t respond to spraying, and it will finally go away on its own.
How to Deadhead Lilacs
Be sure to deadhead young lilacs as they start to bloom (this could take a few years!). Deadheading involves clipping off faded flowers at the base as soon as they start to droop and fade. In response, the plant will use more energy developing new flower buds for the upcoming spring.
How to Prune Lilacs
Although the newer, smaller lilac kinds require less trimming than the enormous conventional lilacs, all lilacs will grow more effectively and bear more flowers with regular pruning. Here are a few possibilities:
- Cut an older lilac shrub to 8 inches above the ground in late winter (March or April), then let it grow out if it isn’t flowering despite receiving plenty of sunlight. The following March, choose 8 to 10 of the best-looking stems, and reduce them by half. Trim the remainder to the ground. The following year, new blossoms should appear.
- Selectively prune 1/3 of the branches all the way back to the ground each year to revive shrubs that aren’t flowering well instead of chopping the shrub all the way down.
- Cut back branches to reduce size as soon as the shrub’s flowering has finished.
What stops a lilac bush from blooming?
A. There are a number of potential causes for your lilac’s failure to blossom. Lack of sufficient sunlight is the main culprit. Lilacs (Syringa) should be planted in an area with at least six hours of direct, bright sunlight per day. They can withstand a wide range of moisture levels as long as they are grown in soil with good drainage.
If your lilac is clipped at the wrong time of year, it might not blossom for another reason. Lilacs bloom in the spring on the growth from the previous year, and soon after, they begin to form the buds for the following year. Within a few weeks of the plant blooming, pruning must be done simultaneously with the removal of the wasted flowers in order to prevent the removal of the buds for the following year. A late freeze can harm flower buds on types that bloom early.
Lilacs have a tendency to mature into overgrown, leggy shrubs with minimal foliage at the bottom. When this occurs, it might be required to prune them to within 12 inches of the ground in order to completely rejuvenate them. When the shrubs are dormant in late winter, this should be done. Lilacs benefit from this repair, although their blooming cycle will be hampered for at least one season. Lilacs can receive a rejuvenation pruning over a two-year period to stop the interruption of bloom cycles. Half of the shrub’s stems should be hard pruned the first year, and the remaining stems the following year.
Lilacs do not consume a lot of food. Excessive fertilization, particularly nitrogen fertilizer, can frequently promote luxuriant vegetative growth at the expense of flower development. A lilac’s failure to bloom could potentially be due to its proximity to turf that receives frequent fertilization.
Sun and shade
Bloomerang lilac trees need at least six hours of direct sunlight each day to grow and flourish. Although they can withstand little shade, they won’t grow as many blossoms.
Soil
Trees prefer alkaline, well-drained soil that is wet. Their roots may being damaged by wet soil. The right amount of moisture can be retained and the Bloomerang can be shielded from temperature changes by a thin layer of mulch.
Watering
The blooming season is when bloomerang lilac trees will require the most water. From spring through the end of bloom season, right before the first frost, water once every ten to two weeks. Two inches of water are required for your tree to receive moist soil that is down to 12 inches.
Water during prolonged dry spells the remainder of the year if the top three inches of the soil begin to totally dry up and if the leaves begin to wilt.
Fertilizing
Beginning the second year after planting, you can fertilize your Bloomerang lilac tree in the first few weeks of spring. Apply a lilac-specific fertilizer to your plants. These often contain more phosphate and potassium and less nitrogen. A good NPK value is 5-10-10.
Pruning
You don’t need to prune your Bloomerang lilac tree. Your tree will blossom once more regardless of whether it encourages new growth. If you choose to prune your tree, do it as soon as it blooms. The flower buds will be severed if it is done in the fall, winter, or before the first bloom. Trimming will cause the rebloom to happen a few weeks later.