Lilacs should be trained as trees from the beginning for optimal results. When young plants are quiescent, remove all lower branches and all other stems that are emerging from the soil, leaving only the whip. Between shin and knee height, cutting the whip low fosters the growth of several upright branches.
As the tree matures, a robust lower trunk with numerous strong leaders forms. An appealing tree with an open, rounded shape is produced by removing leaders to encourage them to rebranch and keeping sprouts and lower growth thoroughly removed. A topiary standard tree is produced by raising the whip’s termination point and maintaining a compact top growth.
Can I grow a tree out of a lilac bush?
You require a little tree to serve as the garden’s centerpiece. Instead, pick a shrub and utilize basic pruning methods to turn it from a bush into a lovely tree. You can produce a unique plant that adds a touch of class to your yard when you prune a shrub into a little tree. For this method to work, you don’t even need to be an expert in plants or good with pruners.
The greatest shrubs to grow into trees are those that don’t normally produce a lot of suckers from the roots (suckers). Numerous varieties of shrubs, from floral beauties to shrubs with fall color, are included in this group. Lilac, flowering quince, panicle hydrangea (Hydrangea paniculata), and spring-blooming star magnolia are some examples of flowering shrubs that can grow into trees (Magnolia stellata).
Many berried bushes grow into lovely little trees that provide the garden winter appeal. Pyracantha, Siebold viburnum (Viburnum sieboldii), and sea buckthorn are members of this group (Hippophae rhamnoides). Another excellent shrub to grow into a small tree is cotoneaster. Choose upright cotoneaster cultivars like Cotoneaster divaricatus or Peking cotoneaster (Cotoneaster ludicus) for the best results.
Sucker-producing shrubs are the most challenging to grow into trees. These suckers typically grow in small thickets when left to their own devices. Elderberry, chokecherry, and red twig dogwood are shrubs that can produce thickets. These shrubs can be trained to grow into tiny trees; however, it could require a bit more work.
Pruning suckering shrubs into multi-stemmed trees, where you choose a number of upright stems to act as trunks, is an option. For a beautiful multi-stemmed little tree, try the bottlebrush poinciana or pineapple guava in warmer climates. Consider witch hazel, serviceberry, or imitation orange in regions with chilly winters.
Smaller plants are simpler to teach when selecting shrubs to grow into trees. Gardening isn’t just about growing bushes into trees right away. It takes years to complete the process. Start with a plant that is around a year old if you wish to train your shrub into a tiny tree with a single trunk. One to two gallons may be used for a container. When grown as a multi-trunked tree, more mature shrubs produce better results.
Prior to planting, decide which stem will serve as the tree’s trunk. Remove branches from the shrub’s bottom third after planting. Place a sturdy stake next to the main stem, such as a tree stake or a chunk of rebar. On a tree with multiple stems, place a stake for each one. Fix the stem to the base with a tie. Rub out or trim any little sprouts that develop along the trunk as the shrub grows.
Remove lower branches each spring so that the trunk makes up one-third of the tree’s height. Till the tree reaches the desired height, repeat this technique every spring. Then, reduce the canopy to three to five major branches, then prune those branches back by three to five inches to promote branching. Thin the canopy as necessary and cut off any branches that sprout along the trunk to maintain your shrub-tree.
What distinguishes a lilac tree from a lilac bush?
other species of lilacs including Syringa myeri. Some lilac types, such as Syringa x hyacinthiflora variants, bloom two weeks earlier.
Lilac trees can they be trained?
A lilac shrub needs to be pruned every year once it has reached the age of two. Early summer is ideal for cutting grass because the flowers have already flowered and withered. Here are some tips for taking care of lilac shrubs and trees.
Lilacs produce the flower buds for the following season in the early summer, right after their blooms have faded. You run the danger of removing the budding buds if you delay trimming until later in the growing season.
This also holds true for lilacs that bloom twice a year, like Bloomerang Purple. After the bush’s initial bloom, you can prune it to promote new growth and more flowers in the second bloom, which occurs in early fall.
Lilacs eventually only bloom at the tips of their highest branches if allowed to develop naturally. Lilac bushes can be revitalized and made more visually appealing by pruning to maintain a balance between older stems and young blossoming branches.
Pruning a lilac shrub involves a number of techniques:
- First, remove any weaker branches and any dead, broken, or diseased stems. Branches should also be trimmed to avoid rubbing or crossing.
- Old stems that are thicker than two inches should be cut off. This controls the height of your lilac plant and promotes the development of new shoots. It is best to thoroughly remove the stems.
- Control sucker emergence. Suckers are fresh branches that sprout from the plant’s base. The main branches can be replaced by a few robust suckers, but any lesser suckers should be removed at the soil line to prevent them from robbing the plant of nutrients.
Last but not least, here are some general guidelines for pruning lilacs:
- Lilac bushes that are mature should only be pruned to a height of 6 to 8 feet.
- Aim for 10 to 12 primary stems, each of which should be between 1 and 2 inches thick.
- Never remove more than one-third of the bush with pruning.
- Older stems and fresh blossoming shoots should be balanced.
How can a lilac bush be trained?
Most gardens benefit from having a lilac shrub because it adds color and smell early in the growing season. It requires little maintenance, adapts to its environment—whether it’s sunny or shady, moist or dry—and gives pollinators nectar in the early growing season. However, if you want a bush that continues to bloom beautifully and look nice after 5 or 6 years, it needs some care. It’s obvious that my aged and neglected lilac bush needs some care.
The common lilac (Syringa vulgaris), which was originally from Asia and was introduced to the United States in the 1700s, looks best in a well-kept cottage garden or as a riotous hedge. It is not a good fit for my native garden.
Each year in the spring, it blooms with lovely, fragrant flowers and lush, green leaves just as I’m about to remove it. Then I suppose I should relocate it to a slightly less wild spot. The choice was aided by some study.
Lilacs may grow anywhere, but a sunny environment produces the greatest blooms. My shrub would thrive in a different location since its present location is quite shady. But neither transferring it nor getting rid of it entirely is a wise idea.
Lilacs have large, difficult-to-move root balls, and any roots that are left behind will produce new plants. The shrub needs to stay where it is unless I want a large excavating project or lilac sprouts all over the yard.
A prettier and healthier bush will result from establishing a yearly maintenance schedule. Since it blooms in the spring, it is preferable to prune this shrub as soon as the flowers have passed away and before the buds for the following year have formed. Trim the shape, remove leaves and branches that are sickly, and deadhead the blooms.
Older stems should periodically be thinned to promote flowering and prevent the blooms from falling too far. Garden Notes No. 619 from the Colorado State University Extension Office contains thorough information on pruning and an excellent image of what not to do.
If the flower bed is expanded with more spring bloomers, a lilac bush might look more lovely. Daffodils, tulips, and hyacinths are excellent companion plants since they are equally adaptable and beautiful in the spring.
By taking generous cuttings while it is in bloom and the air is fragrant, I’ve made peace with my lilac bush and am working to improve its appearance. The bush can be managed with routine pruning, but only after I’ve had a chance to enjoy its flowers both inside and out.
Vicky Barney, a member of the 2011 Master Gardener Class, cultivates gardens for animals.
Could you mold a lilac bush?
Cutting off the tops of stems that have grown out of control is frequently insufficient when pruning lilacs. It is typically preferable to remove the entire stem. The best way to trim lilacs is with clippers. To avoid spreading and promote later blooms, remove spent blossoms right down to the stems. Three-quarters of the branches should be pruned. Remove any shoots that are emerging from the main trunk and are growing close to the ground. Lilacs within the inner branches may need to be trimmed in order to increase air flow or let more light through.
However, it may be essential to prune the entire bush or tree to approximately 6 or 8 inches (15-20 cm) above the ground if lilac shrubs are already too big or starting to look unpleasant. Remember that it takes around three years for flowers to grow after the entire bush has been removed, so you might have to wait.
Which month should lilac bushes be pruned?
All lilacs should generally be clipped right away in the spring after they have finished blooming. Lilacs set their flower buds for the following year immediately after the current year’s flowers have faded, therefore trimming later in the summer or fall will result in the removal of most or all of the blossoms for the following year. The larger common lilacs as well as the shorter or more “shrub like” cultivars are all subject to this timing guideline. While the “when” of lilac trimming is rather simple, the “how” is a little more difficult. For the time being, we’ll refer to lilac pruning as either maintenance pruning or rejuvenation pruning to keep things simple.
Do lilacs need to be clipped annually?
An old, overgrown lilac was one of the few plants that endured my garden restoration. The fact that it obscured my neighbor’s garage and, more importantly, sported steel-blue double flowers, led me to rescue it. Although the blossoms on this shrub were both lovely and fragrant, it was difficult to appreciate them because there were so few of them. I decided to go with a rejuvenation pruning because I knew there was no reason to give up on this long-neglected plant because lilacs can handle severe pruning.
On stems that are no older than five or six years, the common French lilacs (Syringa vulgaris cvs.) yield the most and the largest flowers. The flowers get fewer, smaller, and farther away as the stems get older. A lilac, however, may reliably produce blossoms for decades with the right trimming. The method you choose will depend on how old your shrub is. Plants are maintained annually to keep them healthy. A more drastic trimming may be necessary for lilacs like mine that have seen better days.
Lilacs should be clipped annually to encourage healthy stem development and strong growth that improves flowering. Cutting sick, deformed, and unproductive stems to the ground constitutes annual pruning. I thin and cut back some stems as well to promote healthy, evenly spaced growth. To prevent them from growing too far away from the center of the plant, I also pruned a few of the new shoots that emerged from the roots. I left a few inches between each stem to prevent crowding. Since they produce the most, I maintain the pencil-thick shoots that extend all the way to the ends of the branches. Small, twitchy growth is unproductive and won’t blossom. This growth can indicate an excess of aged, unproductive stems or too much shadow. Remove stems as soon as possible after blossoming, or in late winter if you don’t mind losing a few blooms. Cut off stems and shoots at or just below the soil line.
Dwarf lilacs rarely need pruning
Both the “Palibin” Meyer lilac (Syringa meyeri “Palibin”) and the “Miss Kim” Manchurian lilac (Syringa pubescens ssp. patula “Miss Kim”) are twiggy-habiting, somewhat small lilacs. On these types, just deadheading is needed in terms of pruning. You can prune some of the older stems as the plants get older to make place for younger, more robust stems. In contrast to regular lilacs, these plants hardly ever spread out of control. They might never need to be entirely regenerated if you only undertake a tiny amount of trimming every few years.
After the blooms have faded, deadheading, another aspect of annual maintenance, should be carried out as soon as feasible. Just above the two new shoots that slant out from the stem that stopped with the old bloom, the base of the old flower cluster should be cut off. The new shoots will develop throughout the course of the summer, produce flower buds, and culminate in a cluster of flowers the following spring. While not as crucial as the annual thinning, eliminating the old blossoms enables the plant to focus more of its energy on developing robust branches and flower buds. In June, I deadhead and thin my plants as needed.
While performing this yearly maintenance, I occasionally come upon a young, robust shoot that may be getting too tall but is still a good, productive stem and is a candidate for tipping off. I cut the wasted flower’s entire top stem back to one or two side shoots at the desired height rather of just cutting it off at the base. The side shoots that are now near the top of the bush are encouraged to grow vigorously and develop flower buds for the following year by this cut, which also aids in shrinking the shrub.
My own old, overgrown lilacs need more severe pruning. I went outside in the early spring before growth got going to get a good look at the bush. I looked to see if the plant had been grafted before I began chopping. I immediately cut it down to the ground as it hadn’t (for a grafted plant, see the panel below). I recognized that this drastic trimming would result in the plant losing part of its aesthetic appeal for a few years because lilacs bloom on the growth from the previous season. However, I was also aware that the reward—more blossoms and a stronger plant—would be worthwhile.
It’s crucial to nourish the plant after rejuvenation pruning with compost, composted manure, or a balanced chemical fertilizer and to make sure the soil pH is close to neutral, which lilacs appreciate. In the upcoming years, these supplements and some high-quality mulch will help to encourage vigorous new growth and enhanced flowering.
Has your lilac been grafted?
If your lilac has been grafted, check it out before you start making cuts to the stems. Grafting is a method of plant multiplication in which the scion, or branch, of one species is joined to the rootstock, or stem, of another species. This is typically done to enhance a plant’s look or traits. A graft union, where the cultivar’s scion wood joins the rootstock several inches above ground level, should be obvious. An apparent change in the bark from the rootstock to the scion’s bark, as well as a little swelling at the graft union, are things to watch for. If your plant has been grafted, all of your cuttings must be made above the graft union, and you must prevent shoots from the rootstock from developing into new flowering stems. Flowers of the desired shape or color will not be produced by shoots that emerge from the rootstock.