You might believe your lilac is dying if you see it becoming a little frail or worn out, or if it only produces a few little flowers in the spring. Often, all a plant needs to produce robust new growth and abundant, fragrant blossoms is some hard pruning and some feeding. Rejuvenate a lilac bush by working with it just after bloom, when the blooms have dried up and are spent.
To get to the grass or soil layer, rake away any debris, dead branches, or fallen leaves from the lilac’s base.
Pick three to five of the lilac’s strongest branches after surveying the entire plant. Follow the branches you’ve chosen to the plant’s base, where you can flag each sturdy branch by gently tying a rope or ribbon around its base.
Use hand pruners or a handsaw if needed to make a clean, horizontal cut across all of the unflagged branches that are about an inch off the ground. To prevent breaking off any limbs you want to maintain, carefully pull the trimmed branches away from the lilac.
- You might believe your lilac is dying if you see it becoming a little frail or worn out, or if it only produces a few little flowers in the spring.
From the remaining branches, take off your sting or ribbons. Fertilize the lilac around its base according to the dosage and application guidelines provided by the manufacturer.
Mulch should be applied in a ring around the lilac’s base that is no deeper than 3 inches and no wider than 3 feet. New sprouts won’t be able to emerge if the mulch is too deep.
If there is a drought or excessive heat in your area during the summer, make sure the plant is well-watered. Lilacs require good drainage, but they don’t fare well in dry soil.
The next spring, watch for buds to start swelling on the branches. Reapply fertilizer right before flowering and once more after flowering is finished. This is how you should fertilize each year.
- From the remaining branches, take off your sting or ribbons.
- The next spring, watch for buds to start swelling on the branches. Reapply fertilizer right before flowering and once more after flowering is finished.
Maintain your lilac by doing minimal annual pruning to remove wasted flowers and only every three to five years to remove old and dead branches.
Avoid letting the feed come into contact with the branches when applying fertilizer to the area around the plant, whether it be granular or water-soluble.
Fungal diseases
This season, the Lilac Pseudocercospora leaf spot, a fungus, was detected in lilac samples examined by the Plant Disease Clinic. The same symptoms have been recorded (yellowing then browning leaves, dieback).
The PDC places a strong emphasis on sanitation because it appears that Pseudocercospora spores can survive on plant detritus for a number of years (leaves, stems, dead flowers, bark).
- To assist lessen the possibility of reinfection the next season, remove fallen leaves.
- Consistent watering and renewal cutting to reduce density will sustain the stressed plant.
Several of the plants in our landscapes, including lilacs, are afflicted by verticillium wilt. Verticillium dahliae and Verticillium albo-atrum are the two fungi that cause it. For a plant with this fungus infection, there is no cure.
- As a result of the fungi clogging the branch’s vascular system and preventing the transfer of water and nutrients, individual branches turn brown and die quickly.
- To increase plant longevity, increase watering and fertilization.
- The disease can spread across all sections of the afflicted plant, thus the best preventive is to buy resistant cultivars and practice proper hygiene.
Insects
The Lilac Borer, sometimes known as the Ash Borer, is a clearwing borer moth that creates tunnels in lilac stems.
- Frass, sap, and sawdust are warning signs (excrement).
- Some plants can withstand this harm.
- Others see branch dieback, and occasionally the entire plant dies.
- They won’t likely catch anyone’s attention.
Jeff Hahn, an extension entomologist, confirmed that no lilac borer samples have entered his lab this year.
Herbicide damage
Broadleaf weed treatments on lawns may volatilize, changing to a gas, and float onto unintended plants if sprayed during periods of extreme heat and humidity.
Herbicide damage signs like cupping and browning would appear in patterns:
- along a hedge’s one side but not the other,
- bushes positioned in or close to lawn areas, at the same level throughout their bases,
- and most critically, away from the area’s predominant winds.
Lilac hedges next to agricultural fields or other sizable herbicide-treated areas may experience damage in this manner.
Is it possible to revive a lilac bush?
A: There are a number of potential causes for your lilac’s failure to bloom. The two most frequent culprits are insufficient sunlight and poor pruning. Lilacs (Syringa) should be planted in an area with at least six hours of direct, bright sunlight per day. They can withstand a wide range of moisture levels as long as they are grown in soil with good drainage. If your lilac is clipped at the wrong time of year, it might not blossom for another reason. Lilacs bloom in the spring on the growth from the previous year, and soon after, they begin to form the buds for the following year. Within a couple of weeks of the plant blooming, pruning must be done in order to prevent the removal of the buds for the next year. You can softly clip young lilacs to keep them in check, within boundaries, and flowering profusely. In order to revitalize older plants and increase flower production, a rigorous pruning almost to the ground may be necessary. A late freeze can harm flower buds on types that bloom early.
Lilacs have a tendency to mature into overgrown, leggy shrubs with minimal foliage at the bottom. When this occurs, it might be required to prune them to within 12 inches of the ground in order to completely rejuvenate them. When the shrubs are dormant in late winter, this should be done. Lilacs benefit from this repair, although their blooming cycle will be hampered for at least one season. Lilacs can receive a rejuvenation pruning over a two-year period to stop the interruption of bloom cycles. One year, hard prune half of the shrub’s stems; the following year, hard prune the remaining stems.
Lilacs do not consume a lot of food. Excessive fertilization, particularly nitrogen fertilizer, can frequently promote luxuriant vegetative growth at the expense of flower development. The number of blossoms won’t increase with fertilization. A lilac’s failure to bloom could potentially be due to its proximity to turf that receives frequent fertilization.
What does a lilac that is overwatered look like?
Overwatering your lilacs is one of the worst things you can do. If the soil around a particular lilac variety is always wet, then all lilac kinds are susceptible to fungal diseases including mildew, mold, and other sorts of fungi.
- If lilacs are overwatered, mold and fungus can harm them.
- Lilacs that receive too much water may have root rot.
- Your lilacs have received too much water if their leaves are yellow, pale, or withered.
- If your lilacs have been overwatered, let the soil dry to a depth of 34 inches (7.510 cm) before providing additional moisture.
Lilacs that receive excessive water risk developing root rot. A lot of the time, wilted, pale, or yellow leaves indicate an excess of water. Reduce watering to once every 14 days until these symptoms go away if any of these things happen or if the ground appears to be persistently damp. Remember that you might not need to water your lilacs at all if you are experiencing regular rains.
How can you assist a lilac in need?
Lilacs require full sun, or around six hours of sunshine each day. Make sure that no other trees are blocking your lilac’s sun so that it can thrive even in partial shadow.
Mulching around your lilac plant prevents the roots from drying out and aids with weed control. It’s crucial to routinely water lilacs in dry weather. Lilacs, however, prefer well-draining soil and dislike damp, moist roots.
Stop fertilizing your lilac if it isn’t flowering. Lilacs that have received excessive fertilization will produce an abundance of lush growth but not the desired amount of flowers. Lilacs don’t need a lot of fertilizer, perhaps only a modest feeding in the spring. Your lilac can be receiving more food than it needs if you routinely fertilize adjacent lawns or other plants. Your lilac’s soil will benefit from having phosphorus added, such as by using bone meal.
Scale insects and borers can harm lilacs. Check the leaves and stems of your bush to see if a renewal pruning is necessary. Usually, removing the problematic regions will solve the issue.
How can I fix my lilac bush?
Lilacs are a sturdy group, yet they are susceptible to issues just like any other landscaping shrub. Keep an eye out for these illnesses:
Infection blight
Early shoot and branch dieback, deformed leaves, and leaf spots that start out olive green but quickly turn into water-soaked patches are all brought on by the bacteria Pseudomonas syringae. These areas start to deteriorate and turn brown with yellow edges. Blossoms may abruptly grow limp or turn brown. The easiest strategy to control this illness is to remove the infected material and thin out the shrub’s interior, but if it has spread widely, a copper fungicide will hasten its demise.
a powdery mold
The most frequent issue with lilacs is most likely powdery mildew. It is brought on by a number of fungal diseases, which make the leaves to look powdery, either in discrete areas or all over the surfaces. The best therapy is increasing airflow around sick leaves, so thin your plants annually.
Leaf spotsLeaf spots are another fungus issue that can be brought on by numerous infections. You probably have one of the various leaf spot diseases on your hands if you notice tan spots developing on your lilac leaves, whether or not this results in the leaves falling. This issue, like powdery mildew, is brought on by excessive local humidity; therefore, thin out that shrub and clear away any fallen debris to stop more infections.
How can lilacs be brought back?
The common purple lilac is a hardy, dependable shrub that can grow up to 20 feet tall. Unfortunately, the lower, shady sections of lilac shrubs typically lose their leaves as they get older. Large, overgrown specimens as a result are frequently leggy and ugly. Pruning can restore or rejuvenate old, neglected lilacs. Home gardeners have two alternative pruning techniques to pick from.
Cutting the entire plant back to within 6 to 8 inches of the ground in late winter is one method of renewing a huge, overgrown lilac (March or early April). A significant number of shoots will sprout during the growth season as a result of this aggressive pruning. Select a few sturdy, robust shoots to construct the shrub’s framework, keeping a few of them, and cut off all the others at ground level in the late winter of the next year. To promote branching, head (clip) back the retained shoots to just above a bud.
Cutting back the overgrown shrubs over a three-year period is a second method for pruning mature lilacs. In late January, start the process by digging up and removing one-third of the big, old stems. The following year, trim out half of the remaining old stems (again in late winter). Additionally, trim out some of the recent growth. Keep a few healthy stems that are evenly spaced apart and cut off the rest. In the third year’s late winter, completely remove all of the old wood. It is also necessary to thin the fresh shoots more. This pruning technique should enable you to take pleasure in blossoms every spring because lilac wood must be three years or older before it blooms.
Within a few years, with the right pruning, an old, overgrown lilac can be converted into a robust, appealing shrub. Pruning should be a frequent component of the lilacs’ management regimen after they have been revived. By cutting a few of the oldest branches every three to five years, the shrub can be kept strong and healthy.
(This article, which first published in the Sunday edition of the Lincoln Journal Star Newspaper in February 2005, has since been amended. Consult the Terms of Use for details on how to copy this content and use any images or visuals.)
Does Epsom salt benefit lilac plants?
In zones 4–7 with cold summer weather, lilacs thrive. They are not advised for hot, muggy regions like zones 8 or 9. On the leaf, a powdery mildew may develop in hot, humid conditions. Lilac plants don’t require a lot of organic feeding or fertilization. To encourage flowering, we advise applying a fertilizer that is high in phosphorus and low in nitrogen. Poor blooms can be the result of too much nitrogen in the soil. You can add cow manure to the soil to encourage flowering if the fertility of the soil is low. Because it increases the alkalinity of the soil, bone meal is also an excellent fertilizer for lilac plants. The lilac can easily consume bone meal, a natural plant food. Use Epsom salt on your lilac plant once a month to encourage bushier growth and more blossoms (2 tablespoons of Epsom salt per gallon of water).
How long does a lilac bush live?
Lilacs are renowned for their longevity and hardiness.
Numerous lilac shrubs reach ages of greater than 100. They frequently outlive the residence of the gardener who planted them due to their extended lifespan. As a result, if you’re driving along a country road and come across a few what appear to be random lilac bushes, it was probably a farm or house a century ago.
Try growing lilacs in your garden if you haven’t already. They not only return every year, but they also put on a display for the senses with vibrant blossoms and enticing scents. Lilacs have a lot to offer, and learning about their history demonstrates just how unique these plants are.
How frequently should a lilac bush be watered?
A traditional flower garden, outdoor space, or decorative pot should all contain lilac plants as they are a staple flowering shrub. Zones 3 through 8 are suitable for growing these fragrant shrubs, and they require very little maintenance. Lilacs need at least 6 hours per day of direct sunlight to produce their best flowers. Lilacs benefit from regular watering after initial planting, throughout active growth seasons (spring), and during prolonged dry spells. Lilacs are fairly drought tolerant once they are established.
It is advised to water your lilac plant once every 10 to 14 days from spring till blooming is finished. The ideal irrigation for lilacs is deep, infrequent watering. Make sure the planting space or container has good drainage. These plants don’t appreciate having their feet wet and won’t bloom if they are overwatered. By saturating air pockets with water and reducing soil oxygen levels, excessive water can strangle the lilac tree’s roots. The first indication that the lilac is overwatered is the plant wiggling.