You can prune hydrangeas paniculata and aborescens more severely without losing this year’s blossoms because they bloom on new wood. Although pruning is not necessary, if it is not done the plant will grow taller, with the majority of its flowers at the top.
Cut back to a healthy framework
Trim the previous year’s growth back to a strong framework that is between 30 cm and 60 cm high in the early spring. On each stem, prune to just above a pair of sound buds. For large flowers, prune back to the lowest healthy buds; less firmly for a more natural appearance or a higher plant.
Watch Monty Don describe the many hydrangea trimming techniques in spring:
When should hydrangeas in the UK be pruned?
Each region may vary slightly, but in the UK, I prune my hydrangeas around late February. My hydrangeas have already sprouted new growth in February despite the fact that our region has frosts in March, which is a hint that I should prune them.
The appropriate time to prune each type of hydrangea is listed below. With the exception of the climbing hydrangea, which only requires a simple tidy-up and the removal of wasted flowers, all three of these plants require fairly comparable pruning techniques.
- Hydrophylla hydrangea (Mophead or Lacecap late winter prune)
- Psilocybe paniculata (Prune late winter)
- Petiolaris Hydrangea (ClimbingPrune directly after flowering in Summer)
How far back should hydrangeas be pruned?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Which month is ideal for pruning hydrangeas?
Late summer to early fall (August to September) sees the development of these plants’ bloom buds for the next year. So, before August, prune these shrubs once they are finished blooming (again, make a heading cut).
The Endless Summer is an exception. The Original Bigleaf Hydrangea (H. macrophylla ‘Bailmer’ PP15,298) as well as many cultivars from Bailey Nurseries’ Endless Summer line, including Blushing Bride, BloomStruck, Summer Crush, and Twist ‘n’ Shout.
On the wood from last year and any new wood that sprouts this year, the H. macrophylla blooms. Therefore, whether you prune it or not, it will bloom. A big, 4-foot-tall ring of hardware cloth can keep rabbits from nibbling on the stems of H. macrophylla over the winter.
The pink to blue tint of the Endless Summer hydrangea’s flowers (achievable with the right soil amendment) plus the fact that it blooms on both old and new wood caused it to make a big splash on the Minnesota landscape plant scene.
Should hydrangeas in the UK be deadheaded?
To keep your hydrangeas looking their best and promote the development of new flowers, deadhead regularly during the blooming season.
But in mid- to late-fall, stop deadheading hydrangea shrubs, leaving any spent blooms in situ. This not only adds beauty to the winter landscape but also guarantees that the buds that will bloom the following spring are not removed.
What occurs if your hydrangeas aren’t pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
What occurs if hydrangeas are not deadheaded?
Deadheading too-tall hydrangeas can occasionally be challenging. Your other option is to keep them on if you don’t have the skills to reach spent flowers or all of the spent blooms. And you can do that without suffering too much harm.
Simply omit deadheading hydrangeas, and your plant won’t suffer. At least nothing major enough to need worrying about.
Your hydrangea might not produce as many or as large of blooms as it would have if the spent blooms had been removed. It will nevertheless continue to bloom.
Having said that, you can think about pruning hydrangeas that have gotten too tall in order to make them smaller and easier to handle.
This will make it simpler for you to maintain the tidy appearance of your hydrangeas. Additionally, it will make it simpler to remove spent blooms from plants and promote future blooms with greater vigor.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Are hydrangeas intended to have deadheads?
Correctly and timely deadheading your hydrangeas only benefits these plants in the long run. Deadheading is the technique of removing wasted flowers from a plant to promote greater blooming later on, much like trimming. Professional gardener Melinda Myers notes that deadheading encourages the plant’s energy to flow into the leaves, stems, and roots (rather than developing seeds) for future growth.
According to Myers, deadheading your hydrangeas provides cosmetic advantages in addition to enhancing the future blooms. She says that many gardeners prefer the neat and tidy impression that faded blooms create to that of dried flowers left on the plant. The species of your hydrangeas will determine when and how to deadhead them, according to Myers. Here is her response to our question regarding the ideal moment and technique for harvesting finished flowers from several varieties of hydrangeas.
When should dead hydrangea blossoms be removed?
These are your purple, pink and blue macrophylla hydrangeas (also called mophead and lacecap), as well as hydrangeas with oak-shaped leaves. While reblooming kinds flower twice, some cultivars only bloom once per season on stems from the previous year (old wood).
The initial set of hydrangea blossoms should be deadheaded as soon as they start to turn brown and dry. Cut the stem immediately above the first set of leaves and below the flower head. When this second set starts to fade, you can deadhead once again for reblooming varieties, but only until about mid-August. Your hydrangeas will then produce buds for the flowers of the next year; you don’t want to unintentionally cut these off. After the summer has ended, dried flower heads can remain on the shrubs to add visual interest over the winter.
How can I identify the type of hydrangea I have?
The aforementioned plant traits make it simple to distinguish between climbing and oakleaf hydrangeas, hence they will not be covered in this section.
Shape of the Flower Head
- A paniculata type is most likely present if the flower head is formed like a cone.
- It is either a macrophylla or an arborescens kind if the flower head resembles a ball or a flat disk. Visit the section on Flower Color.
Robert Pavlis’ photograph of a hydrangea arborescens from the side, highlighting the flower’s dome-shaped crown
Flower Color
- A macrophylla type is present if newly opened blooms feature blue, purple, or pink blossoms.
- An arborescens type is present if the flower buds initially seem green, then turn white, and finally turn green or greenish brown as they ripen.
- You likely have a macrophylla kind if the flowers are white when they first open and remain white as they age. Although they are less common, white flowered macrophylla varieties do occur.
Note: Recent breeding is beginning to develop arborescens with flowers that have a pink tint, such as “Eco Pink Puff.” Future cultivars should have a stronger version of this pink.
Pruning mophead hydrangeas
Mophead hydrangeas bloom from buds that were created the year before. To avoid chopping off flower buds, they just need deadheading and very little pruning.
Mophead hydrangeas should not be pruned until late spring since the old flowerheads provide some shelter from late frosts for the young buds.
- Cut back to the first pair of robust buds beneath each flowerhead while deadheading any old flowerheads.
- Remove any stems that are crossing, dead, or damaged.
- To encourage the plant to develop new growth, prune one or two old stems down to the ground on older plants.
Pruning lacecap hydrangeas
Lacecap hydrangeas are maintained similarly to mophead hydrangeas and bloom on buds that have developed over the previous year. Mophead hydrangeas need to be clipped in the spring, whereas lacecap hydrangeas can be pruned in the fall.
- Cut back to the second pair of buds beneath each flowerhead while deadheading all old flowerheads.
Pruning Hydrangea paniculata and Hydrangea arborescens
Both of these species need new growth to produce flowers, therefore prune them in the early spring to encourage the emergence of new stems carrying flowers.
- Remove any damaged or crossed branches as well as any dead timber.
- Cut the stems from last year’s plant by roughly a third, just above a pair of robust, healthy buds.
Pruning climbing hydrangeas
Because climbing hydrangeas take a while to take off, pruning is typically unnecessary for the first two to three years following planting. Once they do begin to grow, they can develop into very vivacious plants that can grow as tall as 10 m (32 ft), therefore it’s a good idea to cut them each year to keep them in check.
- To reduce the chance of removing any future flower buds, prune as soon as possible after summer flowering.
- Cut back any exceptionally long, straggling shoots to a pair of lower, strong, healthy buds. Since the majority of the blossoms will grow at the plant’s top, try not to remove too much of it.
A mature climbing hydrangea can be pruned in the spring to make it smaller. Hard trimming won’t harm climbing hydrangeas, but it will probably result in less flowers for a year or two following. To lessen the stress on the plant, if you are drastically shrinking the size of the plant, do so gradually over two or three years.
Other hydrangea varieties, such Hydrangea aspera and the oak-leaved hydrangea (Hydrangea quercifolia), just require a mild spring pruning to maintain size, give the plants a pleasing form, and remove any dead wood.
It’s fairly easy to prune hydrangeas, and the benefits are well worth the work. If you follow our detailed instructions, your borders will be covered in blooms this summer.