The type of hydrangea you have will determine when to prune it. It is necessary to prune hydrangeas that bloom on new growth in late winter or early spring. Hydrangeas that flower on old, woody growth must be clipped after flowering in the summer.
The specialists at the seed and plant firm Thompson & Morgan state that most hydrangeas are clipped in early spring, ideally in February or March, with the exception of climbing hydrangeas, which are pruned in summer (opens in new tab).
The clearest indicator that your hydrangea is ready for trimming is when all of the seed heads have dried up and new, vibrant green buds have begun to emerge. When you notice those, you’ll know it’s time to prune, according to Lee Burkhill of Garden Ninja (opens in new tab).
Although many hydrangea varieties are pruned at the same time of year—late winter or early spring—the methods for each variety vary.
Is February a good time to deadhead hydrangeas?
Myers asserts that how you deadhead your hydrangeas is just as crucial as when you do it. Make your incision directly above the first set of full-sized leaves, which should be situated beneath the blossom, she instructs. “You are essentially eliminating the faded blossoms to expose a set of sound leaves. This can be carried out immediately following flowering, in late winter or early spring.”
When ought hydrangeas to be pruned?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Should hydrangeas be pruned back during the winter?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Should I remove the hydrangea’s dead flowers?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
What happens to hydrangeas if I don’t deadhead them?
Deadheading too-tall hydrangeas can occasionally be challenging. Your other option is to keep them on if you don’t have the skills to reach spent flowers or all of the spent blooms. And you can do that without suffering too much harm.
Simply omit deadheading hydrangeas, and your plant won’t suffer. At least nothing major enough to need worrying about.
Your hydrangea might not produce as many or as large of blooms as it would have if the spent blooms had been removed. It will nevertheless continue to bloom.
Having said that, you can think about pruning hydrangeas that have gotten too tall in order to make them smaller and easier to handle.
This will make it simpler for you to maintain the tidy appearance of your hydrangeas. Additionally, it will make it simpler to remove spent blooms from plants and promote future blooms with greater vigor.
Can hydrangeas be pruned in March?
Pruning is not typically thought of as one of the many gardening activities that may be done in the fall, despite the fact that there are several. It can be difficult to cultivate hydrangeas successfully in New Hampshire, and if you want your plants to blossom, there is frequently very little room for error in pruning.
Wait until Spring to prune hydrangeas
In New Hampshire, hydrangeas come in a variety of kinds, and each one has quite distinct growth patterns and pruning needs. Some plants only produce flowers on fresh growth, while others mostly produce flower buds on older wood. In any case, it is better to postpone all hydrangea pruning until spring. Hydrangeas, as with all other trees and shrubs, go dormant in the fall. Not much new growth is produced by them until the next spring. As new growth is more vulnerable to harsh cold at the location of wounds, plants that have been trimmed now run a higher risk of winter damage. Additionally, fall pruning may lessen the quantity of June blooms.
Considerations for pruning hydrangea species commonly grown in New Hampshire gardens
The gigantic blue mopheads or lacecaps known as bigleaf hydrangeas (Hydrangea macrophylla), which are familiar to most gardeners, form their flower heads at the tips of stems on old wood from the previous year. Although lower buds along the stem have the capacity to grow blooms as well, the hydrangea’s blossoming potential is decreased if those buds are died or damaged throughout the winter. Wait until new growth sprouts in the spring before pruning your bigleaf hydrangeas. Approximately 1/4 inch above the first group of live buds, prune the plant. A hint: the interior of living stems will be green, whereas the interior of dead stems will be brown. Cut completely dead stems flush with the base.
The three other hydrangea species that are frequently planted in Fresh Hampshire—oakleaf (H. quercifolia), panicle (H. paniculata), and smooth—all bloom on new growth. Before the emergence of the leaves in the late winter and early spring, remove wasted flowers and prune the plant to improve its general structure and habit.
In conclusion, there are a ton of other activities you can engage in to stay occupied in the garden during fall. Save the spring for hydrangea pruning.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Can I prune my hydrangeas all the way down?
These hydrangeas are simple to manage because they bloom each year no matter how they are taken care of or treated. They can be cut down to the ground in the fall and will reappear the next spring with an abundance of blossoms. However, over time, this severe trimming might make the plant gradually weaker.
How should hydrangeas seem throughout the winter?
Throughout the summer, the enormous flower heads of hydrangea bushes (Hydrangea spp.) can cover a landscape with eye-catching flashes of blue, pink, or white. Most hydrangea cultivars, which are hardy in USDA zones 4 to 9, can survive a moderate winter without particular care, but they benefit from careful watering, pruning, fertilizing, mulching, and weathering over the chilly season for their spring growth and beauty. Winter doesn’t cover their stems, and if they aren’t clipped, old flower heads will turn brown.
Tip
If not removed, the dried and blackened flower heads of hydrangeas will stay that way all winter long. In the fall, hydrangeas likewise lose their leaves, but the brown stalks hold upright unless they are cut back.
Where are hydrangeas cut?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.