Similar to the lilac, heavy pruning needs to be done over a number of years. Remove any dead, spindly, dying, or ill-looking wood first. At the base, remove roughly a third of the tallest, oldest branches. The remaining branches should then be cut back by at least a foot. Over the following two years, repeat the same action.
Azaleas and rhododendrons prefer somewhat acidic soils. The optimal time to fertilize in the spring is right after flowering. Though slightly more expensive than chemical fertilizers, organic fertilizers release their nutrients gradually and require less frequent application. After July 15, refrain from fertilizing to prevent the plant from going into full dormancy before winter. Use of lime or alkaline fertilizers should be avoided.
In the summer, rhododendrons and azaleas require a lot of water due to their shallow, fibrous root systems. Make careful to thoroughly hydrate them. You will require water all year long if they are planted beneath wide eave overhangs. Avoid going too deep when hoeing or raking around the plants. Mulches can be used to control weeds, maintain more consistent soil temperatures, and save moisture. Examples of such mulches include sawdust, bark dust, peat moss, straw, or other organic materials.
The garden is busy at the moment. These days, your vegetable garden can contain just about anything. Don’t put it off! Plant more lettuce, carrots, beets, potatoes, peas, cucumbers, squash, pumpkins, melons, dill, basil seedlings, and brassicas. Also plant more beans, tomato and pepper plants, and more lettuce.
Can lilacs be severely pruned?
A: There are a number of potential causes for your lilac’s failure to bloom. The two most frequent culprits are insufficient sunlight and poor pruning. Lilacs (Syringa) should be planted in an area with at least six hours of direct, bright sunlight per day. They can withstand a wide range of moisture levels as long as they are grown in soil with good drainage. If your lilac is clipped at the wrong time of year, it might not blossom for another reason. Lilacs bloom in the spring on the growth from the previous year, and soon after, they begin to form the buds for the following year. Within a couple of weeks of the plant blooming, pruning must be done in order to prevent the removal of the buds for the next year. You can softly clip young lilacs to keep them in check, within boundaries, and flowering profusely. In order to revitalize older plants and increase flower production, a rigorous pruning almost to the ground may be necessary. A late freeze can harm flower buds on types that bloom early.
Lilacs have a tendency to mature into overgrown, leggy shrubs with minimal foliage at the bottom. When this occurs, it might be required to prune them to within 12 inches of the ground in order to completely rejuvenate them. When the shrubs are dormant in late winter, this should be done. Lilacs benefit from this repair, although their blooming cycle will be hampered for at least one season. Lilacs can receive a rejuvenation pruning over a two-year period to stop the interruption of bloom cycles. One year, hard prune half of the shrub’s stems; the following year, hard prune the remaining stems.
Lilacs do not consume a lot of food. Excessive fertilization, particularly nitrogen fertilizer, can frequently promote luxuriant vegetative growth at the expense of flower development. The number of blossoms won’t increase with fertilization. A lilac’s failure to bloom could potentially be due to its proximity to turf that receives frequent fertilization.
How are old, overgrown lilacs pruned?
The common purple lilac is a hardy, dependable shrub that can grow up to 20 feet tall. Unfortunately, the lower, shady sections of lilac shrubs typically lose their leaves as they get older. Large, overgrown specimens as a result are frequently leggy and ugly. Pruning can restore or rejuvenate old, neglected lilacs. Home gardeners have two alternative pruning techniques to pick from.
Cutting the entire plant back to within 6 to 8 inches of the ground in late winter is one method of renewing a huge, overgrown lilac (March or early April). A significant number of shoots will sprout during the growth season as a result of this aggressive pruning. Select a few sturdy, robust shoots to construct the shrub’s framework, keeping a few of them, and cut off all the others at ground level in the late winter of the next year. To promote branching, head (clip) back the retained shoots to just above a bud.
Cutting back the overgrown shrubs over a three-year period is a second method for pruning mature lilacs. In late January, start the process by digging up and removing one-third of the big, old stems. The following year, trim out half of the remaining old stems (again in late winter). Additionally, trim out some of the recent growth. Keep a few healthy stems that are evenly spaced apart and cut off the rest. In the third year’s late winter, completely remove all of the old wood. It is also necessary to thin the fresh shoots more. This pruning technique should enable you to take pleasure in blossoms every spring because lilac wood must be three years or older before it blooms.
Within a few years, with the right pruning, an old, overgrown lilac can be converted into a robust, appealing shrub. Pruning should be a frequent component of the lilacs’ management regimen after they have been revived. By cutting a few of the oldest branches every three to five years, the shrub can be kept strong and healthy.
(This article, which first published in the Sunday edition of the Lincoln Journal Star Newspaper in February 2005, has since been amended. Consult the Terms of Use for details on how to copy this content and use any images or visuals.)
Which month should lilac bushes be pruned?
All lilacs should generally be clipped right away in the spring after they have finished blooming. Lilacs set their flower buds for the following year immediately after the current year’s flowers have faded, therefore trimming later in the summer or fall will result in the removal of most or all of the blossoms for the following year. The larger common lilacs as well as the shorter or more “shrub like” cultivars are all subject to this timing guideline. While the “when” of lilac trimming is rather simple, the “how” is a little more difficult. For the time being, we’ll refer to lilac pruning as either maintenance pruning or rejuvenation pruning to keep things simple.
When can I clip my lilac back?
Older lilacs only bloom on the tallest branches and can have stems as thick as small trees. Fortunately, rejuvenation pruning can bring back a lilac that has been dead for around three years. There are two options available to you.
Using the “third” method is a less harsh way to pull an out-of-control lilac back into shape. For three years in a row, completely remove a third of the oldest branches from the tree. The thickest stems should be removed first. Pruning overgrown lilacs is simplest in the early spring before the branches start to leaf out, even if you’ll lose some blossoms for the current season. Your overgrown lilac should consist primarily of new shoots after three years of consistent pruning. After the plant starts to bloom all over, you may start doing routine maintenance pruning.
You can take the dramatic action of pruning back the entire plant to 6 to 8 inches above the ground in the early spring if you don’t like the way your old lilac looks or you just want a quicker solution. To encourage new development, fertilize the plant with compost or a balanced fertilizer. Throughout the growing season, new shoots will appear; allow them to continue to develop over the summer. The following spring, start cutting the spindly growth while keeping the healthiest shoots and keeping an eye on the plant’s shape. By pruning the remaining shoots to just above a bud, you can promote branching. After this, continue with routine maintenance pruning.
Can I cut lilac all the way down?
The lilac tree will resemble nothing more than a twig in the garden by the end of September. It shouldn’t be reduced to the ground, though. Despite the fact that lilac trees are known for their resilience, it will likely take several years before you see blossoms again because you cut off all the blossoming growth.
If your lilac tree is more mature and unruly, it may require more aggressive pruning and some chopping back; just make sure that it doesn’t take up more than a third of the tree.
Should lilac bushes be pruned?
An old, overgrown lilac was one of the few plants that endured my garden restoration. The fact that it obscured my neighbor’s garage and, more importantly, sported steel-blue double flowers, led me to rescue it. Although the blossoms on this shrub were both lovely and fragrant, it was difficult to appreciate them because there were so few of them. I decided to go with a rejuvenation pruning because I knew there was no reason to give up on this long-neglected plant because lilacs can handle severe pruning.
On stems that are no older than five or six years, the common French lilacs (Syringa vulgaris cvs.) yield the most and the largest flowers. The flowers get fewer, smaller, and farther away as the stems get older. A lilac, however, may reliably produce blossoms for decades with the right trimming. The method you choose will depend on how old your shrub is. Plants are maintained annually to keep them healthy. A more drastic trimming may be necessary for lilacs like mine that have seen better days.
Lilacs should be clipped annually to encourage healthy stem development and strong growth that improves flowering. Cutting sick, deformed, and unproductive stems to the ground constitutes annual pruning. I thin and cut back some stems as well to promote healthy, evenly spaced growth. To prevent them from growing too far away from the center of the plant, I also pruned a few of the new shoots that emerged from the roots. I left a few inches between each stem to prevent crowding. Since they produce the most, I maintain the pencil-thick shoots that extend all the way to the ends of the branches. Small, twitchy growth is unproductive and won’t blossom. This growth can indicate an excess of aged, unproductive stems or too much shadow. Remove stems as soon as possible after blossoming, or in late winter if you don’t mind losing a few blooms. Cut off stems and shoots at or just below the soil line.
Dwarf lilacs rarely need pruning
Both the “Palibin” Meyer lilac (Syringa meyeri “Palibin”) and the “Miss Kim” Manchurian lilac (Syringa pubescens ssp. patula “Miss Kim”) are twiggy-habiting, somewhat small lilacs. On these types, just deadheading is needed in terms of pruning. You can prune some of the older stems as the plants get older to make place for younger, more robust stems. In contrast to regular lilacs, these plants hardly ever spread out of control. They might never need to be entirely regenerated if you only undertake a tiny amount of trimming every few years.
After the blooms have faded, deadheading, another aspect of annual maintenance, should be carried out as soon as feasible. Just above the two new shoots that slant out from the stem that stopped with the old bloom, the base of the old flower cluster should be cut off. The new shoots will develop throughout the course of the summer, produce flower buds, and culminate in a cluster of flowers the following spring. While not as crucial as the annual thinning, eliminating the old blossoms enables the plant to focus more of its energy on developing robust branches and flower buds. In June, I deadhead and thin my plants as needed.
While performing this yearly maintenance, I occasionally come upon a young, robust shoot that may be getting too tall but is still a good, productive stem and is a candidate for tipping off. I cut the wasted flower’s entire top stem back to one or two side shoots at the desired height rather of just cutting it off at the base. The side shoots that are now near the top of the bush are encouraged to grow vigorously and develop flower buds for the following year by this cut, which also aids in shrinking the shrub.
My own old, overgrown lilacs need more severe pruning. I went outside in the early spring before growth got going to get a good look at the bush. I looked to see if the plant had been grafted before I began chopping. I immediately cut it down to the ground as it hadn’t (for a grafted plant, see the panel below). I recognized that this drastic trimming would result in the plant losing part of its aesthetic appeal for a few years because lilacs bloom on the growth from the previous season. However, I was also aware that the reward—more blossoms and a stronger plant—would be worthwhile.
It’s crucial to nourish the plant after rejuvenation pruning with compost, composted manure, or a balanced chemical fertilizer and to make sure the soil pH is close to neutral, which lilacs appreciate. In the upcoming years, these supplements and some high-quality mulch will help to encourage vigorous new growth and enhanced flowering.
Has your lilac been grafted?
If your lilac has been grafted, check it out before you start making cuts to the stems. Grafting is a method of plant multiplication in which the scion, or branch, of one species is joined to the rootstock, or stem, of another species. This is typically done to enhance a plant’s look or traits. A graft union, where the cultivar’s scion wood joins the rootstock several inches above ground level, should be obvious. An apparent change in the bark from the rootstock to the scion’s bark, as well as a little swelling at the graft union, are things to watch for. If your plant has been grafted, all of your cuttings must be made above the graft union, and you must prevent shoots from the rootstock from developing into new flowering stems. Flowers of the desired shape or color will not be produced by shoots that emerge from the rootstock.
Will a lilac shrub reseed itself?
Did you know that the National Gardening Bureau has designated 2022 as the “Year of the Lilac”? They have a sweet, eerie aroma and are among the easiest shrubs for your landscaping to maintain that bloom in the spring. Find out how to plant, nurture, and prune your lilacs.
About Lilacs
Syringa vulgaris, or common lilac, is prized for its tenacity, dependability, and scent. Lilacs are so hardy that they can live for more than 100 years and frequently outlive the houses they were planted near.
This tiny, multi-stemmed deciduous shrub (or tree) has approximately ten canes and blooms at eye level. The height of a common lilac can range from 8 to 12 feet, depending on the cultivar. The aromatic flowers attract butterflies and make good cuttings.
There are lilac types that come in white, cream, and even pink and yellow, though the blooms are typically lilac/purple in hue (ranging from very pale to extremely dark). Flowers can be solitary or double in number.
Lilacs bloom in northern states from mid- to late spring for around two weeks. However, there are lilac varieties for early, mid, and late seasons that, when cultivated together, guarantee a consistent bloom for at least six weeks.
Lilacs do best in soil that is fertile, humus-rich, well-drained, and neutral to alkaline (at a pH near 7.0). Add compost to your soil to improve it if it is in bad condition. (Learn more about adding amendments to the soil and getting it ready for planting.) Lilacs don’t enjoy having their feet wet and won’t blossom if they are kept too moist, so make sure the planting area drains well.
Lilacs should be planted in full sun, which is defined as having at least six hours of sunlight each day, for the finest blooms.
How to Plant Lilacs
- If you’re fortunate, a friend may offer you a sucker, or offshoot, of the plant’s root system. The sucker will first appear pitiful, but all you need to do is dig a hole, fill it with soil, and then insert the sucker. water next, and then wait. You’ll be rewarded with enormous, fragrant blossoms in 4 or 5 years.
- Lilacs purchased from nurseries can also be planted easily. If the plant was cultivated in a container, spread its roots out as you plant it; if it was balled or burlapped, gently remove the covering and any rope before doing so. Set the plant 2 to 3 inches deeper than it was while it was growing in the nursery and cover the roots with topsoil. in water Then add more topsoil to the hole to finish it.
- Depending on the kind, place multiple lilac bushes 5 to 15 feet apart.
- Apply a layer of compost under the plant each spring, followed by a layer of mulch to keep moisture in and weeds under control.
- If the weekly rainfall is less than 1 inch, water during the summer.
- If lilacs receive too much fertilizer, they won’t bloom. In the late winter, they can manage a few 10-10-10, but no more.
- Spread some lime and thoroughly composted manure around the base of your lilac bush once it has finished blooming. Remove suckers while you form the shrub by trimming it.
Pruning Lilacs
- Since lilacs blossom on old wood, it’s important to prune in the spring immediately following their bloom. You risk removing the wood if you prune later in the summer. A word of advice: It’s time to prune if your lilac flower clusters are getting smaller!
- After bloom each year, cut away any dead wood. Remove the oldest canes by pruning (down to the ground). Take out the tiny suckers. Reduce weak branches until a robust shoot remains. Reduce tall canes to eye level.
- Remove one-third of the oldest canes (down to the ground) in year one, half of the remaining old wood in year two, and the remainder in year three if your lilac is very old and in poor condition. Cutting the entire plant back to a height of approximately 6 or 8 inches is another option for elderly lilacs. Although it sounds dramatic, lilacs are remarkably resilient. This option’s drawback is that it takes some time for the hair to grow back. The lilac will grow back bursting with blooms, so there will be less work and more reward.
- It is important to understand that extreme trimming causes bloom loss for one to three years. For these reasons, a smart pruning program gives the bushes yearly attention in an effort to avoid making dramatic and severe cuts.
The Syringa vulgaris kind of lilacs is the most widely grown and fragrant:
- Try the double magneta variety “Charles Joly” for an early bloom.
- Lilacs in the middle of the season include “Monge,” a deep reddish purple, and “Firmament,” a delicate blue.
- Miss Canada, a reddish pink, and Donald Wyman, a solitary purple, are two late-season beauties.
Syringa x hyacinthiflora, an early-flowering lilac cultivar, opens 7 to 19 days before those of the common lilac. Hummingbirds and butterflies are attracted to its fragrant blossoms.
The cutleaf lilac, a fragrant pale lavender, is one of the common lilacs that may flourish as far south as Zone 9. Common lilacs appreciate cold weather. The beautiful shrub Syringa patula ‘Miss Kim’ has light lilac-blue flowers that eventually become white.
There are tiny kinds for gardeners who simply don’t have the space for the conventional larger lilacs, particularly those in urban settings. Even in a container on your balcony or patio, they will grow.
- ‘Baby Kim’ has a lovely rounded shape, only grows 2 to 3 feet high (and 3 feet wide), and has purple flowers that draw butterflies. Hardiness from Zones 3 to 8 extended.
- Compact lilac ‘Little Lady’ (Syringa x) has dark pink buds that open to lilac-pink flowers and grows to be 4 to 5 feet tall and wide at maturity. Zones 2 to 7 are tough.
- Syringa vulgaris cultivars “New Age Lavender” and “New Age White” were developed for mildew resistance and are quite compact, growing from 4 to 5 feet tall and wide. Hummingbirds and butterflies are drawn to their fragrant blossoms. Zone 4 hardy.