How To Prune A Standard Lilac Tree

Cutting off the tops of stems that have grown out of control is frequently insufficient when pruning lilacs. It is typically preferable to remove the entire stem. The best way to trim lilacs is with clippers. To avoid spreading and promote later blooms, remove spent blossoms right down to the stems. Three-quarters of the branches should be pruned. Remove any shoots that are emerging from the main trunk and are growing close to the ground. Lilacs within the inner branches may need to be trimmed in order to increase air flow or let more light through.

However, it may be essential to prune the entire bush or tree to approximately 6 or 8 inches (15-20 cm) above the ground if lilac shrubs are already too big or starting to look unpleasant. Remember that it takes around three years for flowers to grow after the entire bush has been removed, so you might have to wait.

When should a lilac tree be pruned?

A lilac shrub needs to be pruned every year once it has reached the age of two. Early summer is ideal for cutting grass because the flowers have already flowered and withered. Here are some tips for taking care of lilac shrubs and trees.

Lilacs produce the flower buds for the following season in the early summer, right after their blooms have faded. You run the danger of removing the budding buds if you delay trimming until later in the growing season.

This also holds true for lilacs that bloom twice a year, like Bloomerang Purple. After the bush’s initial bloom, you can prune it to promote new growth and more flowers in the second bloom, which occurs in early fall.

Lilacs eventually only bloom at the tips of their highest branches if allowed to develop naturally. Lilac bushes can be revitalized and made more visually appealing by pruning to maintain a balance between older stems and young blossoming branches.

Pruning a lilac shrub involves a number of techniques:

  • First, remove any weaker branches and any dead, broken, or diseased stems. Branches should also be trimmed to avoid rubbing or crossing.
  • Old stems that are thicker than two inches should be cut off. This controls the height of your lilac plant and promotes the development of new shoots. It is best to thoroughly remove the stems.
  • Control sucker emergence. Suckers are fresh branches that sprout from the plant’s base. The main branches can be replaced by a few robust suckers, but any lesser suckers should be removed at the soil line to prevent them from robbing the plant of nutrients.

Last but not least, here are some general guidelines for pruning lilacs:

  • Lilac bushes that are mature should only be pruned to a height of 6 to 8 feet.
  • Aim for 10 to 12 primary stems, each of which should be between 1 and 2 inches thick.
  • Never remove more than one-third of the bush with pruning.
  • Older stems and fresh blossoming shoots should be balanced.

What distinguishes a lilac bush from a lilac tree?

Lilac bushes (also known as shrubs) are characterized by their numerous woody stems that emerge from the plant’s base. In contrast, the trunk of the majority of lilac trees is the only woody stem. However, your neighborhood garden center might also sell shrub lilacs that have been grafted onto a single stem to give them the appearance of miniature trees.

The choice between a lilac tree and a lilac bush is typically determined by the amount of space available. Lilac bushes come in a range of sizes and can be placed in more compact areas of a garden. A lilac tree requires space to reach heights of 20 feet and widths of 15 feet. Both require sunlight to bloom well.

Can I prune a lilac shrub all the way back?

Older lilacs only bloom on the tallest branches and can have stems as thick as small trees. Fortunately, rejuvenation pruning can bring back a lilac that has been dead for around three years. There are two options available to you.

Using the “third” method is a less harsh way to pull an out-of-control lilac back into shape. For three years in a row, completely remove a third of the oldest branches from the tree. The thickest stems should be removed first. Pruning overgrown lilacs is simplest in the early spring before the branches start to leaf out, even if you’ll lose some blossoms for the current season. Your overgrown lilac should consist primarily of new shoots after three years of consistent pruning. After the plant starts to bloom all over, you may start doing routine maintenance pruning.

You can take the dramatic action of pruning back the entire plant to 6 to 8 inches above the ground in the early spring if you don’t like the way your old lilac looks or you just want a quicker solution. To encourage new development, fertilize the plant with compost or a balanced fertilizer. Throughout the growing season, new shoots will appear; allow them to continue to develop over the summer. The following spring, start cutting the spindly growth while keeping the healthiest shoots and keeping an eye on the plant’s shape. By pruning the remaining shoots to just above a bud, you can promote branching. After this, continue with routine maintenance pruning.

How old are lilac trees?

Lilacs are renowned for their longevity and hardiness.

Numerous lilac shrubs reach ages of greater than 100. They frequently outlive the residence of the gardener who planted them due to their extended lifespan. As a result, if you’re driving along a country road and come across a few what appear to be random lilac bushes, it was probably a farm or house a century ago.

Try growing lilacs in your garden if you haven’t already. They not only return every year, but they also put on a display for the senses with vibrant blossoms and enticing scents. Lilacs have a lot to offer, and learning about their history demonstrates just how unique these plants are.

Zones:

The majority of lilac types can withstand cold temperatures in zones 3 to 8, although others, like Scentara Double Blue, can (S. hyacinthiflora). There are some cultivars that don’t require a winter chill, like as “Lavender Lady” (S. vulgaris), which is heat tolerant to zone 9. The majority of others do need a wintertime period of cold and dormancy.

Height/Spread:

The common lilac, Syringa vulgaris, reaches heights of 12 to 15 feet and widths of 10 to 12 feet. The majority of dwarf types are smaller and reach maturity at 4 to 6 feet tall and 3 to 7 feet broad. Syringa reticulata, often known as the Japanese tree lilac, grows up to 30 feet tall.

Bloom Time:

The majority bloom in late May, however there are new re-blooming kinds, such the Bloomerang series, as well as early spring, mid-spring, and late-season blooming variants.

Color:

The common lilac (Syringa vulgaris) has gray to gray-brown bark, purple blooms, and dark gray-green to blue-green foliage (with no fall color change). But there are actually seven recognized hues for lilac flowers: white, violet, blue, lavender, pink, magenta, and purple, with several variations of each hue.

Other:

True lilacs, such as the California, mountain, and wild lilacs, are truly members of the genus Ceanothus. Butterfly bushes are frequently referred to as summer lilacs, especially sterile and non-invasive varieties.

Can I cut a piece of a lilac tree?

Lilac bushes might be difficult to grow from cuttings, but it is not impossible. Take cuttings from the fragile new growth of lilac bushes in the late spring or early summer. Rooting is less likely in mature growth. To enhance your chances of success, make many cuts.

When the weather is chilly and the plant is well-hydrated, take cuttings in the morning. Cut tender, fresh growth in lengths of 4 to 6 inches (10–15 cm). Leave two to three leaves on the cuttings at the top after removing the bottom leaves. The nodes—the locations where the leaves were linked to the stem—will produce roots.

Sand, perlite, and potting soil should be added to a pot. Make a small hole in the mixture with a stick or your pinky after briefly moistening it. Plant the cutting in the hole after dipping the bottom in rooting hormone. After that, lightly massage the potting mix around the cutting’s base to help it stand up straight.

If the leaves of the cuttings don’t touch, you can place many ones in the same pot. In celled nursery trays, cuttings can also be planted. Put the saucepan somewhere warm, like the top of a refrigerator. Right now, bright light is not necessary.

If necessary, water the cuttings every day to keep the potting mix moist but never waterlogged. To create a humid environment, you can place a clear plastic bag over the pot; however, you should periodically unzip the bag or poke a few holes in it to allow air circulation; otherwise, the cuttings risk rotting.

In one to two months, the cutting should start to take root, which is typically signaled by the emergence of robust new growth. At this stage, turn the pot to direct light that is bright and let the potting soil air dry for a little while before watering.

Move the lilacs to their permanent outdoor position after allowing them to mature and the roots to become well-established.

Does new or old wood produce lilac blooms?

What specifically prevents these traditional plants from blooming? Instead of focusing on just one theory, consider a number of potential causes for this issue, including (in addition to illnesses and pests):

  • Pruning when it’s not necessary
  • The flower buds die in the cold
  • placing your lilacs in the incorrect location
  • The shrub in question either isn’t old enough to generate flower buds or is too old to do so.

You’ll see that while reasons one and three point to the gardener having done something incorrect, arguments two and four point to no one having done anything incorrect.

Why does it matter what time of day you prune? Shrubs called lilacs produce flowers on rotting wood. This indicates that the flower buds for the upcoming spring’s blooming season have already been formed on the growth from the previous year. When this growth is pruned, the flower buds and, consequently, the blooms they would have produced, are lost. Because of this, it is recommended that you clip lilac bushes as soon as they finish flowering (before they have set bud for next year).

Click Play to Learn How to Prune Lilacs

Despite being a relatively cold-hardy plant, the common lilac (Syringa vulgaris) can suffer harm if a hard frost or freeze occurs just as the flower buds are about to open. As a result, that year’s flowers are lost. You can’t really stop it, so simply accept the loss and look forward to the blossoming twice as much the next year.

Where you put your lilac shrub matters a lot, just like it does with most other plants. Lilacs require full sunlight and prefer well-drained soil. If you made a mistake when you first put your plants on either of these fronts, you can be paying for it today by your lilac not blooming. However, there is a simple solution to the issue: move your shrub to a more favorable location.

Regarding the fourth reason, be aware that although though these bushes have a long lifespan, they do tend to produce fewer flowers as time passes. Implementing a rejuvenation pruning on your lilacs will solve this issue (do not expect immediate results, though). Sometimes, though, the converse is true: your plant may be too young to bloom. Allow some time.

Should lilacs be Deadheaded?

The removal of spent flowers to encourage new blooming—deadheading—is a crucial part of lilac maintenance. Lilacs should be deadheaded as soon as the flowering is finished to allow the plants to grow robust, healthy buds that will flower vivaciously the following year. According to the University of Minnesota Extension, you can use a hand pruner, but larger plants could require a hedge trimmer. Only the dead blossom should be removed; the plant should still have two leaves.

According to the Chicago Botanic Garden, you should prune lilacs at the same time as you deadhead them since they set the blossoms for the following year quickly after flowering. By doing this, you can prevent damaging or removing the developing buds. Three to four years after planting, you should start pruning lilacs. It might be necessary to trim back overgrown lilacs to just a few inches above the ground. Winter is the ideal time to complete this. In this instance, it will take the shrub one or two growing seasons to start blooming once more.