Start with a wreath made of grapevines, which you can either buy or build yourself. You won’t really need much else to hold the branches in place if you have a decent wreath shape with lots of twisted branches.
Cut the hydrangea blooms off the stems at about a 12-inch length. Although you can trim it later, doing it this way will make setting it in the wreath form much simpler. Cut lots of them to produce a full, luscious wreath since I always discover that I need twice as many as I anticipate.
Fill mason jars with about an inch of water and all the stems. Recall the tips on how to dry hydrangeas so that their color doesn’t fade? That is the main focus of this. But as soon as the water is gone, cut off the stems rather than letting them dry all the way to crispy. At this time, the wreath is created. The blossoms have dried sufficiently on their own, yet they are still malleable enough to hold part of their color while you work with them.
To ensure that the bloom is firmly fastened in the grapevines, weave the stem ends through the wreath. If you’d like, you can secure the stems with a small amount of florist wire, although I never feel the need to. They remain in place perfectly fine as long as the door is not slammed!
To ensure that the wreath is even and full all around, add flowers all the way around, using a variety of sizes and shapes. To make the wreath look more like a wreath than just a mass of flower heads, I try to keep the wreath’s core fairly clear.
Now you can include a ribbon or fancy wreath hanger. For a neat appearance, I prefer to utilize a magnetic wreath hanger on my metal doors. There are a ton of options, so you can choose whatever you want!
Build out wreath with dried hydrangeas
I started by gathering all of my dried hydrangeas and putting them together into a wreath. I attached the flowers on a grapevine wreath that I purchased from a craft store as the base. I made two hydrangea wreaths from of my large collection of dried hydrangea blossoms: one large wreath from blue hydrangea blooms and one mini wreath from green Annabelle hydrangea blooms. All those flowers were produced in one season because once hydrangeas are established, they are incredibly fruitful.
It wasn’t difficult at all to attach the dried hydrangea blossoms to the grapevine foundation. Simply forcing the stems through the vines typically keeps them in place rather well. In addition to plugging in the dried flowers, I also pruned some excessively protruding little vine bits to safeguard the dried flowers.
After approximately filling in each of the hydrangea flower heads one by one to complete the circle, I filled in any significant vacant spaces to ensure enough covering. I use some hot glue to attach the flower stems to the grapevine wreath that don’t stay there very well.
If you like, you may wrap them in florist wire like in this post, but I was too lazy to do that and I knew I would leave it hanging on the wall when the project was finished. Whether or whether your grapevine wreath can hold the stems well and how much they’ll be handled once finished will determine how much you want to secure the flowers.
Spray dried hydrangea wreath with flower dye
After that, I colored the hydrangeas using a floral spray. The floral spray is a clear flower dye that gives flowers a very natural-looking appearance. The majority of flowers fade with time, therefore I used this spray to keep my wreath’s color consistent for a very long period while also enhancing the original flower and making it somewhat more brilliant.
I used the hue hydrangea blue, which is ideal for the flower I chose. Since the base color of my Annabelle wreath was lime green, I also used fresh green flower dye.
Fill in accent flowers
The next step is to add filler flowers, which is also why I didn’t mind if my first layer of hydrangea blossoms had a few minor gaps. I used billy balls and strawflowers from my yard to make this wreath. I wouldn’t even bother spraying either flower because they are known for having an endless lifespan.
After the hydrangea layer, I simply drizzle them evenly over the wreath, aiming to fill up any holes I may have. I use a hot glue gun to add a bead of glue to the end of some of the flowers’ extremely thin stems before inserting them into the wreath. In this manner, I was able to fasten them to the wreath without risking damage by pressing them in too firmly.
My advice for making a DIY flower wreath that looks good is to work your way down in size, so I started with the hydrangeas before switching to strawflowers and then craspedia. Another piece of advice is to change the quantity of several flower varieties. As an illustration, I used twice as many strawflowers as craspedia. The wreath will have more depth and interest if done this manner.
Applying a coat of UV protectant spray can prevent the flowers’ color from fading if you intend to hang your DIY wreath in a location with strong light. Although it is optional, this step can be useful if you want your dried flowers to maintain their brilliant color.
Due to the size of the green wreath with preserved Annabelle hydrangeas, I only utilized billy balls as accent flowers. Once I’ve preserved additional blooms, I might trickle in some little blossoms in the future.
Attach ribbon or string for hanging
I simply tie a rope to the back of the wreath once the flower-building portion is complete so I can hang it in my house! The use of a ribbon is yet another adorable concept. It strikes me as a fantastic idea to give this wreath more color and texture.
Mine is in the hallway leading to my living room. I believe it complements my gold mirror frame rather well.
That concludes the instructions for making this dried hydrangea wreath. I’m very happy with the way this project turned out, and every time I pass by it, it makes me feel better. I hope you get some fantastic dried hydrangea decorating ideas from this post!
How can I create a fall-themed hydrangea wreath?
I made use of my favorite vintage spring wreath. For my wedding, my mother crafted two of them to hang on the church doors.
I adored this so much! But as time went on, it became sad and unclean, and it simply didn’t look good. I then recycled it.
Bring your fresh flower flowers inside, put them in a lovely spot, and snap a photo since they are so adorable! You’re not have to, but I did.
Step 5. Once you have all of the blooms stuck through the wreath, secure the ends.
Once the stems are in the ideal position, flip the wreath over and tuck the ends back into the base. It was really simple for me to simply tuck them beneath the wreath in the back.
Alternatively, you may use floral wire or hot glue to affix them from behind. (If I were to create this wreath again, I would just hot glue the stems in place after trimming them down on the back.)
Step 6. Add a Cute Sign
I put it on the door and added the sweet little sign in the center with some floral wire. You may always leave the sign off till it comes closer to Thanksgiving if you want to ease into fall. (Although being thankful is always a good thing!)
Making this took me, perhaps, 30 minutes from beginning to end. Anyone can complete this!
Despite not being particularly traditional fall colors, those hues are simply ideal for the season. I believe this is the reason I adore them so much.
How are live hydrangeas preserved?
* The shrub’s leaves continue to blossom until late summer. The petals will start to seem old and vintage at the end of the summer. Many blooms will acquire intriguing red and pink hues if they are kept on the bush for a little while longer. It’s possible that the timing will be very different in chilly regions. We’re interested in hearing feedback from people whose drying experiences differ using the form below.
* The blooms can be cut, the leaves can be removed, they can be put in a vase with or without water, and they can be left to dry. Except in cases where the stems are extremely fragile and thin, hydrangeas do not need to be hung upside down to dry.
* Use Silica Gel to dry fresh flowers of hydrangeas to preserve their incredibly natural color.
Purchase Dried Hydrangeas
I have a shortcut for individuals who adore the appearance of dried hydrangeas but don’t want to put in the work! On the market, you can find some excellent actual dried hydrangea petals and fake dried hydrangeas. You may see a few of my favorites here.
Links to Amazon products are affiliate links on this website. For purchases made using these links, we might get paid.
Do you use hairspray on dried hydrangeas?
Yes, I am aware that using water to dry hydrangeas seems a little backwards, but I assure you that it is the simplest method. Thus, this is what you do:
- Cut:
- Cut the quantity of hydrangeas you intend to dry or incorporate into your current cut flower design.
- Make them 12 to 18 long. Once I get all the stems together, I normally make the initial cut longer than that and depending on where it would preserve the shrub in good condition.
- De-Leaf:
- Simply move your hand down the stem, pulling off the leaves as you go, by grasping it at the top just below the bloom. I suppose you could go up, but if you do, you run the risk of picking up too much speed and damaging the bloom as well.
- I frequently conduct my de-leafing in the garden, leaving the leaves to act as natural compost in my beds. If you do it inside, though, stripping your stems directly over a garbage can will make cleanup much simpler.
- Fill a vase with:
- Simply arrange your hydrangeas like you would any other flower arrangement, which will require some trial and error in placement if you want to enjoy them before they dry—I don’t know why you wouldn’t.
- I typically hold each stalk in one hand while moving the others such that the flowers with the straightest upward faces are in the center and the smaller and/or droopier ones are on the sides. I then make my final selection, keeping them all at the same level, after gauging their height in relation to the vase.
- The bottoms of your stems should then be pounded with a hammer to aid in their water absorption, however I’ve never tried it; feel free to.
- Just before placing flowers in the vase, I twist tie or rubber band the stems to secure them in place.
- Adjust the arrangement of the blossoms after placing them in a tall vase strong enough to hold the length of the stems.
- Insert Water:
- I’d advise adding the water before the flowers if your faucet doesn’t extend with a hose. Do it either way if you have one of those posh faucets.
- Usually, I would fill the vase about half and three quarters full, making sure that all of the stems were submerged completely.
- Dry:
- You might have to keep adding water until the flowers are completely dry, depending on how the blooms were when you started the drying process. If not, I’ve seen that they wilt and then dry wilted, which isn’t very attractive.
- Therefore, maintain watering if the flowers are still quite supple. You can stop watering them once they have dried out and feel and look like paper.
- You can enjoy your lovely dried flower arrangement for many years once a few weeks have passed. On our mantel, we really have a pair that has been there for about 9 years.
- Spray:
- When your hydrangeas are completely dry, mist them with hairspray aerosol (sorry, aerosol spray just works better than the pump spray kind…it just does).
- I used to believe that this was done to coat the blooms in order to keep their color for a little while longer. But now I believe it’s only to keep the florets together, making it less likely that they will fall off when you brush up against them and make a big mess.
How are hydrangea garlands made?
Making this Festive Hydrangea Garland: Steps
:
- Hydrangeas should be cut into smaller bunches. Iron wire should be wrapped around the Hydrangea stem.
- Roses and Ozothamnus should also be added. Make sure to encircle each stem with the iron wire.
- You can now hang your festive hydrangea garland! Enjoy!
How are hydrangeas dried by hanging?
Your hydrangeas can be be preserved in a number of other ways. If you’d rather, you can let your blooms air dry by hanging each stem upside-down in a cool, dry area. Despite being slightly more fragile than their water-dried cousins, air-dried hydrangeas nevertheless look stunning.
You can also leave the blossoms on the plant to dry until they feel papery. The color might not be as vivid and the products won’t stay as long as they would if you used the water-dried approach. Regardless of the technique you use, aim to replace your dried flowers every year or so, just in time for the branch to yield the next crop of fresh flowers.
Warning
A word of warning with this hands-off method: If you live in a region with a lot of rain, there’s a possibility that your flowers will turn brown before effectively drying out.