3. Take the plant out of its pot and place it in the hole. Make sure the top of the root ball is about an inch or more above the soil surface.
4. Apply the soil mixture all the way around the root ball, pressing it down firmly.
5. Take a long drink.
6. Mulch the area you just planted to a depth of 2 inches, being careful not to pile mulch up against the base of the plant. This will help keep the soil moist and prevent weeds from sprouting by denying them access to sunlight.
How to Water Lilacs
After planting, monitor your plants frequently, and water them once or twice a week, or anytime the top inch of soil becomes dry. While watering, count to 10 to make sure you’re providing each lilac plant with enough moisture. (If the plant becomes too dry, the leaves will start to droop.) You can reduce watering to every other week once plants have been planted and have had a few months to establish themselves. Lilacs won’t require additional water during the second growing season or later unless there hasn’t been rain in your location for a month or more.
How to Feed Lilacs
Lilacs should be fed Miracle-Gro Shake ‘n Feed Flowering Trees & Shrubs Plant Food after they have bloomed in the spring to encourage the development of robust roots. This plant food is jam-packed with nutrients for your plants, including kelp, earthworm castings, feather meal, and bone meal. These ingredients nourish soil bacteria, which in turn break down organic matter into nutrients for your plants.
How to Help Prevent Disease Problems with Lilacs
Powdery mildew is the main problem with lilacs, especially common lilacs. What’s the best approach to prevent this? Purchase and plant lilac cultivars that resist powdery mildew (check the plant tag or online description). Lilacs benefit from being planted in areas with good airflow. This fungus disease won’t respond to spraying, and it will finally go away on its own.
How to Deadhead Lilacs
Be sure to deadhead young lilacs as they start to bloom (this could take a few years!). Deadheading involves clipping off faded flowers at the base as soon as they start to droop and fade. In response, the plant will use more energy developing new flower buds for the upcoming spring.
How to Prune Lilacs
Although the newer, smaller lilac kinds require less trimming than the enormous conventional lilacs, all lilacs will grow more effectively and bear more flowers with regular pruning. Here are a few possibilities:
- Cut an older lilac shrub to 8 inches above the ground in late winter (March or April), then let it grow out if it isn’t flowering despite receiving plenty of sunlight. The following March, choose 8 to 10 of the best-looking stems, and reduce them by half. Trim the remainder to the ground. The following year, new blossoms should appear.
- Selectively prune 1/3 of the branches all the way back to the ground each year to revive shrubs that aren’t flowering well instead of chopping the shrub all the way down.
- Cut back branches to reduce size as soon as the shrub’s flowering has finished.
How can you assist a lilac bush in need?
Verify that the plant has adequate drainage. Lilacs shouldn’t be overwatered because doing so could cause the plant to drown. Additionally, it’s crucial to avoid submerging the bush because it won’t survive in dry soil. Check the lilac shrub leaves and the soil to see if extra water is required.
How can I speed up the growth of my lilac bush?
Lilac bushes grow fairly quickly, with some types growing more quickly than others. Any way you look at it, lilac bushes are a fast-growing variety of shrub.
By ensuring that your lilac shrub receives adequate sunlight and is placed in healthy soil, you can hasten its growth. It’s important to carefully and moderately water the lilac bush.
In the spring, fertilizer can be applied to the lilac shrub to help it grow. You should be able to observe your lilac shrub growing quickly each year if you heed our advice.
Which fertilizer is ideal for lilacs?
Lilac plants don’t require a lot of food or fertilizer. A 10-10-10 fertilizer mixture applied yearly in the early spring is what we advise. (The amounts of nitrogen, phosphorus, and potassium, or NPK as they are popularly known, are represented by the digits 10-10-10 in the formula.) Early spring fertilization of lilacs with a high phosphorus solution encourages blossoming.
Coffee grounds and grass clippings are also excellent sources of nitrogen. Use in moderation since an excess of nitrogen in the soil can lead to subpar blooms. The ideal soil conditions for lilacs are slightly alkaline (6.5–7.0 pH), wet, and well-drained. The soil may become more alkaline by adding bone meal to it. Use Miracle-Gro Shake ‘n Feed Flowering Trees & Shrubs Plant Food in the spring if you decide to feed your plant. Last but not least, lilac plants dislike acidic soil. Epsom salts can be used to encourage blossoming while the plant is dormant.
How can a lilac shrub be improved?
Did you know that the National Gardening Bureau has designated 2022 as the “Year of the Lilac”? They have a sweet, eerie aroma and are among the easiest shrubs for your landscaping to maintain that bloom in the spring. Find out how to plant, nurture, and prune your lilacs.
About Lilacs
Syringa vulgaris, or common lilac, is prized for its tenacity, dependability, and scent. Lilacs are so hardy that they can live for more than 100 years and frequently outlive the houses they were planted near.
This tiny, multi-stemmed deciduous shrub (or tree) has approximately ten canes and blooms at eye level. The height of a common lilac can range from 8 to 12 feet, depending on the cultivar. The aromatic flowers attract butterflies and make good cuttings.
There are lilac types that come in white, cream, and even pink and yellow, though the blooms are typically lilac/purple in hue (ranging from very pale to extremely dark). Flowers can be solitary or double in number.
Lilacs bloom in northern states from mid- to late spring for around two weeks. However, there are lilac varieties for early, mid, and late seasons that, when cultivated together, guarantee a consistent bloom for at least six weeks.
Lilacs do best in soil that is fertile, humus-rich, well-drained, and neutral to alkaline (at a pH near 7.0). Add compost to your soil to improve it if it is in bad condition. (Learn more about adding amendments to the soil and getting it ready for planting.) Lilacs don’t enjoy having their feet wet and won’t blossom if they are kept too moist, so make sure the planting area drains well.
Lilacs should be planted in full sun, which is defined as having at least six hours of sunlight each day, for the finest blooms.
How to Plant Lilacs
- If you’re fortunate, a friend may offer you a sucker, or offshoot, of the plant’s root system. The sucker will first appear pitiful, but all you need to do is dig a hole, fill it with soil, and then insert the sucker. water next, and then wait. You’ll be rewarded with enormous, fragrant blossoms in 4 or 5 years.
- Lilacs purchased from nurseries can also be planted easily. If the plant was cultivated in a container, spread its roots out as you plant it; if it was balled or burlapped, gently remove the covering and any rope before doing so. Set the plant 2 to 3 inches deeper than it was while it was growing in the nursery and cover the roots with topsoil. in water Then add more topsoil to the hole to finish it.
- Depending on the kind, place multiple lilac bushes 5 to 15 feet apart.
- Apply a layer of compost under the plant each spring, followed by a layer of mulch to keep moisture in and weeds under control.
- If the weekly rainfall is less than 1 inch, water during the summer.
- If lilacs receive too much fertilizer, they won’t bloom. In the late winter, they can manage a few 10-10-10, but no more.
- Spread some lime and thoroughly composted manure around the base of your lilac bush once it has finished blooming. Remove suckers while you form the shrub by trimming it.
Pruning Lilacs
- Since lilacs blossom on old wood, it’s important to prune in the spring immediately following their bloom. You risk removing the wood if you prune later in the summer. A word of advice: It’s time to prune if your lilac flower clusters are getting smaller!
- After bloom each year, cut away any dead wood. Remove the oldest canes by pruning (down to the ground). Take out the tiny suckers. Reduce weak branches until a robust shoot remains. Reduce tall canes to eye level.
- Remove one-third of the oldest canes (down to the ground) in year one, half of the remaining old wood in year two, and the remainder in year three if your lilac is very old and in poor condition. Cutting the entire plant back to a height of approximately 6 or 8 inches is another option for elderly lilacs. Although it sounds dramatic, lilacs are remarkably resilient. This option’s drawback is that it takes some time for the hair to grow back. The lilac will grow back bursting with blooms, so there will be less work and more reward.
- It is important to understand that extreme trimming causes bloom loss for one to three years. For these reasons, a smart pruning program gives the bushes yearly attention in an effort to avoid making dramatic and severe cuts.
The Syringa vulgaris kind of lilacs is the most widely grown and fragrant:
- Try the double magneta variety “Charles Joly” for an early bloom.
- Lilacs in the middle of the season include “Monge,” a deep reddish purple, and “Firmament,” a delicate blue.
- Miss Canada, a reddish pink, and Donald Wyman, a solitary purple, are two late-season beauties.
Syringa x hyacinthiflora, an early-flowering lilac cultivar, opens 7 to 19 days before those of the common lilac. Hummingbirds and butterflies are attracted to its fragrant blossoms.
The cutleaf lilac, a fragrant pale lavender, is one of the common lilacs that may flourish as far south as Zone 9. Common lilacs appreciate cold weather. The beautiful shrub Syringa patula ‘Miss Kim’ has light lilac-blue flowers that eventually become white.
There are tiny kinds for gardeners who simply don’t have the space for the conventional larger lilacs, particularly those in urban settings. Even in a container on your balcony or patio, they will grow.
- ‘Baby Kim’ has a lovely rounded shape, only grows 2 to 3 feet high (and 3 feet wide), and has purple flowers that draw butterflies. Hardiness from Zones 3 to 8 extended.
- Compact lilac ‘Little Lady’ (Syringa x) has dark pink buds that open to lilac-pink flowers and grows to be 4 to 5 feet tall and wide at maturity. Zones 2 to 7 are tough.
- Syringa vulgaris cultivars “New Age Lavender” and “New Age White” were developed for mildew resistance and are quite compact, growing from 4 to 5 feet tall and wide. Hummingbirds and butterflies are drawn to their fragrant blossoms. Zone 4 hardy.
How can lilacs be revitalized?
The common purple lilac is a hardy, dependable shrub that can grow up to 20 feet tall. Unfortunately, the lower, shady sections of lilac shrubs typically lose their leaves as they get older. Large, overgrown specimens as a result are frequently leggy and ugly. Pruning can restore or rejuvenate old, neglected lilacs. Home gardeners have two alternative pruning techniques to pick from.
Cutting the entire plant back to within 6 to 8 inches of the ground in late winter is one method of renewing a huge, overgrown lilac (March or early April). A significant number of shoots will sprout during the growth season as a result of this aggressive pruning. Select a few sturdy, robust shoots to construct the shrub’s framework, keeping a few of them, and cut off all the others at ground level in the late winter of the next year. To promote branching, head (clip) back the retained shoots to just above a bud.
Cutting back the overgrown shrubs over a three-year period is a second method for pruning mature lilacs. In late January, start the process by digging up and removing one-third of the big, old stems. The following year, trim out half of the remaining old stems (again in late winter). Additionally, trim out some of the recent growth. Keep a few healthy stems that are evenly spaced apart and cut off the rest. In the third year’s late winter, completely remove all of the old wood. It is also necessary to thin the fresh shoots more. This pruning technique should enable you to take pleasure in blossoms every spring because lilac wood must be three years or older before it blooms.
Within a few years, with the right pruning, an old, overgrown lilac can be converted into a robust, appealing shrub. Pruning should be a frequent component of the lilacs’ management regimen after they have been revived. By cutting a few of the oldest branches every three to five years, the shrub can be kept strong and healthy.
(This article, which first published in the Sunday edition of the Lincoln Journal Star Newspaper in February 2005, has since been amended. Consult the Terms of Use for details on how to copy this content and use any images or visuals.)
Why isn’t the lilac growing?
A. There are a number of potential causes for your lilac’s failure to blossom. Lack of sufficient sunlight is the main culprit. Lilacs (Syringa) should be planted in an area with at least six hours of direct, bright sunlight per day. They can withstand a wide range of moisture levels as long as they are grown in soil with good drainage.
If your lilac is clipped at the wrong time of year, it might not blossom for another reason. Lilacs bloom in the spring on the growth from the previous year, and soon after, they begin to form the buds for the following year. Within a few weeks of the plant blooming, pruning must be done simultaneously with the removal of the wasted flowers in order to prevent the removal of the buds for the following year. A late freeze can harm flower buds on types that bloom early.
Lilacs have a tendency to mature into overgrown, leggy shrubs with minimal foliage at the bottom. When this occurs, it might be required to prune them to within 12 inches of the ground in order to completely rejuvenate them. When the shrubs are dormant in late winter, this should be done. Lilacs benefit from this repair, although their blooming cycle will be hampered for at least one season. Lilacs can receive a rejuvenation pruning over a two-year period to stop the interruption of bloom cycles. Half of the shrub’s stems should be hard pruned the first year, and the remaining stems the following year.
Lilacs do not consume a lot of food. Excessive fertilization, particularly nitrogen fertilizer, can frequently promote luxuriant vegetative growth at the expense of flower development. A lilac’s failure to bloom could potentially be due to its proximity to turf that receives frequent fertilization.