Although cutting Hydrangea blossoms is not as difficult as you would believe, the greatest results come from following a few specific techniques. Thankfully, they are straightforward and simple to understand.
Start with a plant that is well-hydrated. The day before you plan to cut flowers from your Hydrangea, water the plant at the ground level if it hasn’t rained recently. The following day, early in the morning, perform your bloom cutting.
Because the bloom will not continue to develop after being cut, choose the ideal bloom to remove at the appropriate stage of the plant. Select only mature, fully opened blooms that are in their full color. The longevity of the bloom in the vase increases with age. Always expect immature blossoms to wilt.
Always trim between the nodes to properly shape the blooms (the locations along the stem where the leaves come out.) To enable the plant to recuperate as quickly as possible, trim the stem in a straight line and remove all the leaves. To open the stem’s vascular system and enable it to absorb the maximum water possible, recut the stem at an angle and then cut a vertical slit into it.
Put the stem right away in a pail of lukewarm water that has been properly diluted with cut flower food. Before arranging the stems, bring them inside and condition them by submerging them in water for a few hours. Recut the blossoms right after conditioning them, then soak the stem ends in alum. (Most grocery shops’ spice sections carry alum, a pickling ingredient.)
When should I prune the hydrangea’s flowers?
Late summer to early fall (August to September) sees the development of these plants’ bloom buds for the next year. So, before August, prune these shrubs once they are finished blooming (again, make a heading cut).
The Endless Summer is an exception. The Original Bigleaf Hydrangea (H. macrophylla ‘Bailmer’ PP15,298) as well as many cultivars from Bailey Nurseries’ Endless Summer line, including Blushing Bride, BloomStruck, Summer Crush, and Twist ‘n’ Shout.
On the wood from last year and any new wood that sprouts this year, the H. macrophylla blooms. Therefore, whether you prune it or not, it will bloom. A big, 4-foot-tall ring of hardware cloth can keep rabbits from nibbling on the stems of H. macrophylla over the winter.
The pink to blue tint of the Endless Summer hydrangea’s flowers (achievable with the right soil amendment) plus the fact that it blooms on both old and new wood caused it to make a big splash on the Minnesota landscape plant scene.
How are hydrangea flowers cut for vases?
Nothing beats having your own fresh-cut, homegrown Hydrangea branches displayed in a vase where you can see them frequently. Because we worked so hard to make beautiful floral bushes, why not bring them inside as well? But how can you harvest Hydrangea blossoms from your plants in order to make a vase or arrangement?
You must water the plant the day before and cut the stems the next morning if you want to cut Hydrangea blooms for a vase. Just above a leaf node, cut straight through the stem. Then remove the stem’s leaves, recut it at an angle, and cut a vertical incision starting at the base. Put it right away in a bucket of warm water.
It’s not difficult to learn how to use Hydrangea plants to make a lovely cut flower arrangement. The right time to take your cuttings, how to select and cut the blooms, and how to prepare them for a vase or arrangement can all make a significant impact. Continue reading to learn more about all of that and more.
Can I harvest hydrangea blossoms?
The classic romantic summer bloom is hydrangeas! They are famous for their tiny floweret clusters and large, moppy crowns. It is absolute delight to have a plentiful bouquet of them cut and put on a table! Yes, hydrangeas are among the most popular flowers out there. These dramatic beauty can, however, be a little bit diva-like, like many other things. As soon as they are cut and brought inside, they frequently wilt. And droopy hydrangeas are not at all attractive! Here are some methods for ensuring full, long-lasting cut hydrangeas!
When hydrangeas are in full bloom, cutting them is very different from cutting them at the end of the season when they are papery and essentially don’t require water to keep lovely. The following wonderful advice can help you keep freshly cut hydrangeas in your home all summer long.
TAKE A CONTAINER OF WATER OUT TO THE GARDEN WITH YOU WHEN CUTTING HYDRANGEAS.
Hydrangea stems need to be placed in tepid water as soon as they are cut. Each stem should be cut diagonally with clippers or a sharp knife before being submerged.
Hydrangeas should only be pruned in the morning and with the most developed blooms. They will have a little paperier appearance than the others.
STRIP THE LEAVES OFF OF CUT HYDRANGEA STEMS
Make sure to pluck the leaves from each hydrangea stem before bringing them indoors. I should not breach this rule as often as I do. Large water consumers, the leaves will siphon water away from the blooms. At the very least, remove most of the leaves. Those who are submerged should definitely be taken out!
SMASH OR CUT THE BOTTOM OF THE STEMS
To achieve the required length, trim the hydrangea stems. To encourage more water to move up the stems and nourish the blooms, smash them right down to the bottom. I break the ends of the hydrangeas I bring inside with a wooden meat mallet. Instead of breaking a stem, you may also cut the bottom of each one diagonally and then chop it up.
BOIL WATER AND DIP EACH HYDRANGEA STEM INTO IT
water that is on the boil The sap that hydrangeas produce clogs their stems and prevents water from reaching their stunning blossoms. The sap can be removed with the aid of hot water.
Fill a cup with boiling water. Each stem should be dipped into the boiling water for 30 seconds before being immediately placed in a vase or other container with room temperature water (see directions above).
REPLACE WATER EVERY OTHER DAY
Hydrangeas will remain fresher for a longer period of time if the water in the vase or other containers is changed! Additionally, before placing hydrangeas in fresh water, give them a clean cut and dip them in hot water!
EMERGENCY RESCUE FOR WILTING HYDRANGEAS
You can completely submerge hydrangea blossoms for around 45 minutes if they begin to prematurely wilt. Recut the stems, boil some water, and then put them back in a vase with fresh water. They should regain consciousness in a few hours and live for one or two more days.
To have a large, gorgeous bouquet of hydrangeas adorn your home, a little extra effort is required, but it is so, so worth it!
If you appreciate the information in this article, you may want to save it to your Pinterest board for GARDEN, FLOWERS, or TIPS.
You can see all the wonderful stuff I’m finding to pin HERE and follow me on Pinterest.
Does hydrangea flower cutting promote new blooms?
Because hydrangea blossoms are so large, deadheading a hydrangea can help the plant focus energy on other, more crucial aspects of its growth. To promote new blossoms and keep your plant appearing healthy, you should continue this approach throughout the flowering season. The time of year determines the best way to deadhead hydrangea blossoms.
You should cut the wasted blossoms with a long stem still attached if it’s before August. Look at the stem’s junction with the larger branch; there ought to be several little buds there. Make sure to keep the buds whole when trimming the stem back as short as you wish.
The plant is probably developing new buds along the stems in anticipation of the following spring if it is August or later. Check the area between each set of leaves as you work your way down the stem from the faded bloom. You should see buds at the first or second pair of leaves. Offset the spent bloom far above those buds with a knife.
Carry a cloth that has been dipped in denatured alcohol while you work. To stop disease from spreading throughout the bush, wipe your pruners clean with the rag in between cuts.
If deadheaded, do hydrangeas bloom again?
Hydrangeas cannot be revived by deadheading like other flowers can. Reblooming hydrangeas produce a second set of flowers on fresh stems later in the season compared to regular kinds, which only bloom once each season. When deadheading hydrangeas, the goal is to keep the shrubs looking tidy and to direct plant growth toward roots and leaves rather than seeds.
How long are newly cut hydrangeas good for?
The lacecap and mophead varieties of French hydrangeas are depicted in the blue bowl, respectively (galvanized bucket). We adore these options for gorgeous color: The first three are “Bluebird,” “Big Daddy,” “Endless Summer,” and “Nikko Blue.”
We love beautiful French hydrangeas just as much as you do. These impressive blooms virtually arrange themselves, but if you cut them prematurely or improperly prepare them, they’ll deflate quickly. Take our suggestion and gather flowers in the morning for arrangements that will last for a while (approximately two to three days for fresh cut flowers). Choose ones that are transparent and vibrant. The strongest blooms are mature ones that have a little papery texture. The stems should be cut at an angle and placed right away in a pail of water. Place them right away or keep them for up to two days in a cold, dark place (like a garage). Try one of these suggestions as soon as you notice the flower heads starting to droop.
Bathe in alum In order to arrange hydrangeas, Kathy Thomas, a floral designer with KSR Designs in Macon, Georgia, uses the following technique: To aid in promoting water uptake, she coats the bottom 1/2 inch of each stem in alum powder, which can be bought in the grocery store’s baking section.
Take a Bath Blooms should be submerged in water for 45 minutes, stems and all. The best technique to revive previously arranged flowers is to do this.
Calm Down Fill vases with two parts ice to one part water to cool flowers as the temperature soars.
Prepare the Flowers
Although it may seem contradictory to use water to dry flowers, hydrangeas benefit from a gentle desiccation process that keeps their color and shape (even the stems end up sturdier when dried this way).
Using a pair of pruning shears, cut each blossom on the angled side, leaving a stem length of between 12 and 18 inches. Take off every leaf from the stalk.
Place the Cut Flowers in Water
After that, arrange your freshly cut flowers in a vase, fill it about halfway with water, and set it aside in a cool location away from the sun. Keep in mind that hydrangea dry best when given room to “breathe,” so take care not to overcrowd your vase with stems.
Allow the vase’s water to totally dry out. After this procedure, which typically lasts two to three weeks, your hydrangeas should feel dry to the touch and the stems should simply snap off. They are now prepared for use.
Use Your Dried Hydrangeas
Your dried hydrangeas can be displayed in a variety of artistic ways. Although they look lovely on their own in a vase, you can also incorporate them into seasonal wreaths or use them in window boxes with other dried flowers. Getting hitched in the autumn? Even your bridal floral arrangements can incorporate them.
Where are hydrangeas cut?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.
Should I remove the hydrangea’s dead flowers?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
What occurs if hydrangeas are not deadheaded?
Deadheading too-tall hydrangeas can occasionally be challenging. Your other option is to keep them on if you don’t have the skills to reach spent flowers or all of the spent blooms. And you can do that without suffering too much harm.
Simply omit deadheading hydrangeas, and your plant won’t suffer. At least nothing major enough to need worrying about.
Your hydrangea might not produce as many or as large of blooms as it would have if the spent blooms had been removed. It will nevertheless continue to bloom.
Having said that, you can think about pruning hydrangeas that have gotten too tall in order to make them smaller and easier to handle.
This will make it simpler for you to maintain the tidy appearance of your hydrangeas. Additionally, it will make it simpler to remove spent blooms from plants and promote future blooms with greater vigor.
What makes deadheading and trimming distinct from one another?
Fortunately, all you need for this project are some clippers, gloves, and a pail to gather your cuttings. I really appreciate this multi-snip tool that I discovered last spring for this gardening task because deadheading is typically a little more delicate than full-on trimming. Use anything you have, including regular bypass pruners.
Since I normally go through 1-2 pairs of gloves in a season (due to holes in the fingertips…), I bought these gloves last spring. I was impressed by how lightweight but robust they are. Since I have spare pairs accessible for any garden assistance I may hire, I haven’t even pierced the first pair’s fingertips yet.
General Pruning-Deadheading Tips
(Note: pruning refers to removing any portion of the plant, from large to small – what we’re doing in the summer is small, just cutting back some and trimming.) Deadheading is the practice of removing wasted flowers from plants.
The majority of your perennials and shrubs that have bloomed or are still blooming only require that you “deadhead,” or cut off the spent blossoms. To determine where to cut the dead flower, consider the following two factors:
- Like this buddleia in the picture above, you can prune it back to the first sign of new growth. This small variety (Lo & Behold ‘Ice Chip’) will continue to bloom into the fall thanks to those new stems on the sides that will bear additional flowers.
- OR, you might prune it more, taking further cuts to keep it under control for the planting area. To prevent the plant from getting too huge or to assist it maintain a more aesthetically acceptable form, continue to look for new growth, but further down on the stems.
You’ll also find plants with dead flower stalks and leaves, like the daylily in this image. Your garden will look better into the fall if you take the effort to remove the browning, dead leaves and deadhead the flower stalks. The majority of daylilies have finished flowering, but they will continue to provide grass-like leaves as a backdrop to the garden. However, some types, like Stella d’Oro, will continue to bloom if the dead stalks are removed.
Shearing the plant back is the simplest approach to get rid of all the wasted flowers on perennials with tiny blooms, like hardy geranium. Once the majority of the wasted blooms have been removed from the plant, grab pieces with your hand and chop the entire part off. For a week or two, it won’t look its finest, but it will soon sprout new growth and produce more blooms.
The heavy blooms on mature hydrangeas may be causing the plant to bend and dip, exposing the crowns. It’s the ideal moment to remove the oldest blossoms, especially those at the bottom, so that the leaves can reposition themselves. If you cultivate a reblooming hydrangea, such as Endless Summer, it will keep producing new flowers for you.
The act of gathering all the blooms and decorating the home with vases of fresh flowers after hydrangea trimming in the summer is the greatest part!
You’ve undoubtedly been deadheading individual rose blossoms as they appeared over the previous few months, but your shrub will bloom more quickly if you trim back to a five-leaf junction, where new growth and blooms will develop.
Additionally, you should prune back to new growth to remove any damaged leaves and stems (like I obviously have on some of my roses – if you live in the Pacific Northwest, every rose will get blackspot…). This not only improves the appearance but also helps prevent disease from spreading to the new growth.
Have any advice to offer? Have you come across any plants that benefit from mid-season deadheading, shearing, or pruning? Comment below and let me know!
To get you thinking about fall, check out these additional posts from our Tuesdays in the Garden group!