Lilacs often bloom quite consistently, although occasionally they don’t. To ensure that yours grows, follow these suggestions:
- Usually, the issue is a lack of sunlight. Each day, the sun should be exposed for at least six hours.
- Nitrogen in excess might be problematic. Lilacs are frequently cultivated in lawns, and nitrogen-rich fertilizers are utilized to make lawns greener. This results in lovely green foliage on the lilac but minimal blossom. Avoid using nitrogen-rich fertilizers.
- Make sure to prune when the season is perfect. Remove any dead or damaged timber in the early spring. However, avoid performing any significant pruning because you can just remove the dormant flower buds. It’s acceptable to perform more significant trimming after the flowers have faded, such as reshaping or rejuvenating an elderly bush. The old flowers can be taken out as well. Just be sure you finish it before the middle of the summer. A few of the flowers from the upcoming season may be lost if you wait too late.
Visit the Lilac Planting and Care page for a comprehensive guide to lilac planting and care.
How can a lilac bush be revitalized to produce more flowers?
An old, overgrown lilac was one of the few plants that endured my garden restoration. The fact that it obscured my neighbor’s garage and, more importantly, sported steel-blue double flowers, led me to rescue it. Although the blossoms on this shrub were both lovely and fragrant, it was difficult to appreciate them because there were so few of them. I decided to go with a rejuvenation pruning because I knew there was no reason to give up on this long-neglected plant because lilacs can handle severe pruning.
On stems that are no older than five or six years, the common French lilacs (Syringa vulgaris cvs.) yield the most and the largest flowers. The flowers get fewer, smaller, and farther away as the stems get older. A lilac, however, may reliably produce blossoms for decades with the right trimming. The method you choose will depend on how old your shrub is. Plants are maintained annually to keep them healthy. A more drastic trimming may be necessary for lilacs like mine that have seen better days.
Lilacs should be clipped annually to encourage healthy stem development and strong growth that improves flowering. Cutting sick, deformed, and unproductive stems to the ground constitutes annual pruning. I thin and cut back some stems as well to promote healthy, evenly spaced growth. To prevent them from growing too far away from the center of the plant, I also pruned a few of the new shoots that emerged from the roots. I left a few inches between each stem to prevent crowding. Since they produce the most, I maintain the pencil-thick shoots that extend all the way to the ends of the branches. Small, twitchy growth is unproductive and won’t blossom. This growth can indicate an excess of aged, unproductive stems or too much shadow. Remove stems as soon as possible after blossoming, or in late winter if you don’t mind losing a few blooms. Cut off stems and shoots at or just below the soil line.
Dwarf lilacs rarely need pruning
Both the “Palibin” Meyer lilac (Syringa meyeri “Palibin”) and the “Miss Kim” Manchurian lilac (Syringa pubescens ssp. patula “Miss Kim”) are twiggy-habiting, somewhat small lilacs. On these types, just deadheading is needed in terms of pruning. You can prune some of the older stems as the plants get older to make place for younger, more robust stems. In contrast to regular lilacs, these plants hardly ever spread out of control. They might never need to be entirely regenerated if you only undertake a tiny amount of trimming every few years.
After the blooms have faded, deadheading, another aspect of annual maintenance, should be carried out as soon as feasible. Just above the two new shoots that slant out from the stem that stopped with the old bloom, the base of the old flower cluster should be cut off. The new shoots will develop throughout the course of the summer, produce flower buds, and culminate in a cluster of flowers the following spring. While not as crucial as the annual thinning, eliminating the old blossoms enables the plant to focus more of its energy on developing robust branches and flower buds. In June, I deadhead and thin my plants as needed.
While performing this yearly maintenance, I occasionally come upon a young, robust shoot that may be getting too tall but is still a good, productive stem and is a candidate for tipping off. I cut the wasted flower’s entire top stem back to one or two side shoots at the desired height rather of just cutting it off at the base. The side shoots that are now near the top of the bush are encouraged to grow vigorously and develop flower buds for the following year by this cut, which also aids in shrinking the shrub.
My own old, overgrown lilacs need more severe pruning. I went outside in the early spring before growth got going to get a good look at the bush. I looked to see if the plant had been grafted before I began chopping. I immediately cut it down to the ground as it hadn’t (for a grafted plant, see the panel below). I recognized that this drastic trimming would result in the plant losing part of its aesthetic appeal for a few years because lilacs bloom on the growth from the previous season. However, I was also aware that the reward—more blossoms and a stronger plant—would be worthwhile.
It’s crucial to nourish the plant after rejuvenation pruning with compost, composted manure, or a balanced chemical fertilizer and to make sure the soil pH is close to neutral, which lilacs appreciate. In the upcoming years, these supplements and some high-quality mulch will help to encourage vigorous new growth and enhanced flowering.
Has your lilac been grafted?
If your lilac has been grafted, check it out before you start making cuts to the stems. Grafting is a method of plant multiplication in which the scion, or branch, of one species is joined to the rootstock, or stem, of another species. This is typically done to enhance a plant’s look or traits. A graft union, where the cultivar’s scion wood joins the rootstock several inches above ground level, should be obvious. An apparent change in the bark from the rootstock to the scion’s bark, as well as a little swelling at the graft union, are things to watch for. If your plant has been grafted, all of your cuttings must be made above the graft union, and you must prevent shoots from the rootstock from developing into new flowering stems. Flowers of the desired shape or color will not be produced by shoots that emerge from the rootstock.
Why aren’t my lilac bushes in bloom?
A. There are a number of potential causes for your lilac’s failure to blossom. Lack of sufficient sunlight is the main culprit. Lilacs (Syringa) should be planted in an area with at least six hours of direct, bright sunlight per day. They can withstand a wide range of moisture levels as long as they are grown in soil with good drainage.
If your lilac is clipped at the wrong time of year, it might not blossom for another reason. Lilacs bloom in the spring on the growth from the previous year, and soon after, they begin to form the buds for the following year. Within a few weeks of the plant blooming, pruning must be done simultaneously with the removal of the wasted flowers in order to prevent the removal of the buds for the following year. A late freeze can harm flower buds on types that bloom early.
Lilacs have a tendency to mature into overgrown, leggy shrubs with minimal foliage at the bottom. When this occurs, it might be required to prune them to within 12 inches of the ground in order to completely rejuvenate them. When the shrubs are dormant in late winter, this should be done. Lilacs benefit from this repair, although their blooming cycle will be hampered for at least one season. Lilacs can receive a rejuvenation pruning over a two-year period to stop the interruption of bloom cycles. Half of the shrub’s stems should be hard pruned the first year, and the remaining stems the following year.
Lilacs do not consume a lot of food. Excessive fertilization, particularly nitrogen fertilizer, can frequently promote luxuriant vegetative growth at the expense of flower development. A lilac’s failure to bloom could potentially be due to its proximity to turf that receives frequent fertilization.
Deadhead your lilac plants?
Dwarf lilacs that resemble ordinary lilacs include the “Palibin” Meyer lilac (Syringa meyeri “Palibin”) and the “Miss Kim” Manchurian lilac (Syringa pubescens ssp. patula “Miss Kim”). However, they hardly ever need pruning for maintenance, though you can do it sometimes for shape. They can also profit from deadheading, just like other lilac kinds.
The act of manually removing withered blossoms from a plant is known as deadheading. This encourages some plants to continue blooming. But only during the first several years of growth does deadheading seem to make lilacs bloom more effectively.
Within two to five years, young lilac plants should start blooming. Deadheading the spent blooms when the plants are young encourages the plant to focus its energy on developing new buds. It won’t require this stimulation once the plant has grown older, and you’ll probably have so many flowers that the task would take too long.
Your lilac will blossom beautifully some years, and less so other years, just like with any plant. Blooms frequently rely on the climate. You will be rewarded with an abundance of blossoms the next year if you have a beautiful summer during which strong new growth emerges. Less flowers will bloom in a summer with harsh weather. Therefore, if your lilac’s color changes from one year to the next, don’t get alarmed. The blossoms will come as long as the plant is strong and you continue with maintenance pruning.
Which month should lilac bushes be pruned?
All lilacs should generally be clipped right away in the spring after they have finished blooming. Lilacs set their flower buds for the following year immediately after the current year’s flowers have faded, therefore trimming later in the summer or fall will result in the removal of most or all of the blossoms for the following year. The larger common lilacs as well as the shorter or more “shrub like” cultivars are all subject to this timing guideline. While the “when” of lilac trimming is rather simple, the “how” is a little more difficult. For the time being, we’ll refer to lilac pruning as either maintenance pruning or rejuvenation pruning to keep things simple.
Lilacs may they bloom twice a year?
Compared to other lilac trees, bloomerang lilac trees are more compact, reaching a short height of 4-6 feet tall and a spread of 4-6 feet, giving them a pleasing, rounded appearance. Their long, arched branches bear their veined leaves, which are bright green for the majority of the year until turning yellow in the fall.
The characteristic 4-petaled, 4-6 inch deep lilac-purple blooms on bloomerang lilac trees appear starting in May, cease blooming in June, and then return in July through the first frost of the year.
Specifications
With tall, arched branches, a compact and rounded shape, and rich green foliage that turn golden in the fall. Four spread petals, 4-6 inch, lilac-purple flowers that bloom in the spring and later in the summer.
Are lilacs suited for coffee grounds?
Lilac plants don’t require a lot of food or fertilizer. A 10-10-10 fertilizer mixture applied yearly in the early spring is what we advise. (The amounts of nitrogen, phosphorus, and potassium, or NPK as they are popularly known, are represented by the digits 10-10-10 in the formula.) Early spring fertilization of lilacs with a high phosphorus solution encourages blossoming.
Coffee grounds and grass clippings are also excellent sources of nitrogen. Use in moderation since an excess of nitrogen in the soil can lead to subpar blooms. The ideal soil conditions for lilacs are slightly alkaline (6.5–7.0 pH), wet, and well-drained. The soil may become more alkaline by adding bone meal to it. Use Miracle-Gro Shake ‘n Feed Flowering Trees & Shrubs Plant Food in the spring if you decide to feed your plant. Last but not least, lilac plants dislike acidic soil. Epsom salts can be used to encourage blossoming while the plant is dormant.
What are lilacs fed?
Lilac bushes respond well to fertilizer made from bone meal. This is as a result of increased soil alkalinity. It is a simple natural plant food that the lilac may consume.
Lilac fertilization isn’t necessarily required until the first and second years after planting. To sweeten the soil and prevent too much acidity, they could be fertilized with superphosphate and limestone when they are planted.
You can exclude standard fertilizer mixtures if the soil has the right balance and has a lot of organic matter. The only bushes that will truly benefit from annual feeding are those planted in poor soil. When you do feed the plants, use a 5-10-10 ratio. Around the plant’s root zone, distribute 1 cup (237 ml) of granular food evenly, and then water the soil.
Do I need to get rid of dead lilac blooms?
The removal of spent flowers to encourage new blooming—deadheading—is a crucial part of lilac maintenance. Lilacs should be deadheaded as soon as the flowering is finished to allow the plants to grow robust, healthy buds that will flower vivaciously the following year. According to the University of Minnesota Extension, you can use a hand pruner, but larger plants could require a hedge trimmer. Only the dead blossom should be removed; the plant should still have two leaves.
According to the Chicago Botanic Garden, you should prune lilacs at the same time as you deadhead them since they set the blossoms for the following year quickly after flowering. By doing this, you can prevent damaging or removing the developing buds. Three to four years after planting, you should start pruning lilacs. It might be necessary to trim back overgrown lilacs to just a few inches above the ground. Winter is the ideal time to complete this. In this instance, it will take the shrub one or two growing seasons to start blooming once more.
What happens to lilacs once they bloom?
A lilac shrub needs to be pruned every year once it has reached the age of two. Early summer is ideal for cutting grass because the flowers have already flowered and withered. Here are some tips for taking care of lilac shrubs and trees.
Lilacs produce the flower buds for the following season in the early summer, right after their blooms have faded. You run the danger of removing the budding buds if you delay trimming until later in the growing season.
This also holds true for lilacs that bloom twice a year, like Bloomerang Purple. After the bush’s initial bloom, you can prune it to promote new growth and more flowers in the second bloom, which occurs in early fall.
Lilacs eventually only bloom at the tips of their highest branches if allowed to develop naturally. Lilac bushes can be revitalized and made more visually appealing by pruning to maintain a balance between older stems and young blossoming branches.
Pruning a lilac shrub involves a number of techniques:
- First, remove any weaker branches and any dead, broken, or diseased stems. Branches should also be trimmed to avoid rubbing or crossing.
- Old stems that are thicker than two inches should be cut off. This controls the height of your lilac plant and promotes the development of new shoots. It is best to thoroughly remove the stems.
- Control sucker emergence. Suckers are fresh branches that sprout from the plant’s base. The main branches can be replaced by a few robust suckers, but any lesser suckers should be removed at the soil line to prevent them from robbing the plant of nutrients.
Last but not least, here are some general guidelines for pruning lilacs:
- Lilac bushes that are mature should only be pruned to a height of 6 to 8 feet.
- Aim for 10 to 12 primary stems, each of which should be between 1 and 2 inches thick.
- Never remove more than one-third of the bush with pruning.
- Older stems and fresh blossoming shoots should be balanced.