Cutting off the tops of stems that have grown out of control is frequently insufficient when pruning lilacs. It is typically preferable to remove the entire stem. The best way to trim lilacs is with clippers. To avoid spreading and promote later blooms, remove spent blossoms right down to the stems. Three-quarters of the branches should be pruned. Remove any shoots that are emerging from the main trunk and are growing close to the ground. Lilacs within the inner branches may need to be trimmed in order to increase air flow or let more light through.
However, it may be essential to prune the entire bush or tree to approximately 6 or 8 inches (15-20 cm) above the ground if lilac shrubs are already too big or starting to look unpleasant. Remember that it takes around three years for flowers to grow after the entire bush has been removed, so you might have to wait.
When do lilac bushes need to be pruned?
All lilacs should generally be clipped right away in the spring after they have finished blooming. Lilacs set their flower buds for the following year immediately after the current year’s flowers have faded, therefore trimming later in the summer or fall will result in the removal of most or all of the blossoms for the following year. The larger common lilacs as well as the shorter or more “shrub like” cultivars are all subject to this timing guideline. While the “when” of lilac trimming is rather simple, the “how” is a little more difficult. For the time being, we’ll refer to lilac pruning as either maintenance pruning or rejuvenation pruning to keep things simple.
How far can lilac bushes be pruned back?
Older lilacs only bloom on the tallest branches and can have stems as thick as small trees. Fortunately, rejuvenation pruning can bring back a lilac that has been dead for around three years. There are two options available to you.
Using the “third” method is a less harsh way to pull an out-of-control lilac back into shape. For three years in a row, completely remove a third of the oldest branches from the tree. The thickest stems should be removed first. Pruning overgrown lilacs is simplest in the early spring before the branches start to leaf out, even if you’ll lose some blossoms for the current season. Your overgrown lilac should consist primarily of new shoots after three years of consistent pruning. After the plant starts to bloom all over, you may start doing routine maintenance pruning.
You can take the dramatic action of pruning back the entire plant to 6 to 8 inches above the ground in the early spring if you don’t like the way your old lilac looks or you just want a quicker solution. To encourage new development, fertilize the plant with compost or a balanced fertilizer. Throughout the growing season, new shoots will appear; allow them to continue to develop over the summer. The following spring, start cutting the spindly growth while keeping the healthiest shoots and keeping an eye on the plant’s shape. By pruning the remaining shoots to just above a bud, you can promote branching. After this, continue with routine maintenance pruning.
Can you severely prune the lilac bushes?
The lilac tree will resemble nothing more than a twig in the garden by the end of September. It shouldn’t be reduced to the ground, though. Despite the fact that lilac trees are known for their resilience, it will likely take several years before you see blossoms again because you cut off all the blossoming growth.
If your lilac tree is more mature and unruly, it may require more aggressive pruning and some chopping back; just make sure that it doesn’t take up more than a third of the tree.
What distinguishes a lilac bush from a lilac tree?
Lilac bushes (also known as shrubs) are characterized by their numerous woody stems that emerge from the plant’s base. In contrast, the trunk of the majority of lilac trees is the only woody stem. However, your neighborhood garden center might also sell shrub lilacs that have been grafted onto a single stem to give them the appearance of miniature trees.
The choice between a lilac tree and a lilac bush is typically determined by the amount of space available. Lilac bushes come in a range of sizes and can be placed in more compact areas of a garden. A lilac tree requires space to reach heights of 20 feet and widths of 15 feet. Both require sunlight to bloom well.
Does new or old wood produce lilac blooms?
What specifically prevents these traditional plants from blooming? Instead of focusing on just one theory, consider a number of potential causes for this issue, including (in addition to illnesses and pests):
- Pruning when it’s not necessary
- The flower buds die in the cold
- placing your lilacs in the incorrect location
- The shrub in question either isn’t old enough to generate flower buds or is too old to do so.
You’ll see that while reasons one and three point to the gardener having done something incorrect, arguments two and four point to no one having done anything incorrect.
Why does it matter what time of day you prune? Shrubs called lilacs produce flowers on rotting wood. This indicates that the flower buds for the upcoming spring’s blooming season have already been formed on the growth from the previous year. When this growth is pruned, the flower buds and, consequently, the blooms they would have produced, are lost. Because of this, it is recommended that you clip lilac bushes as soon as they finish flowering (before they have set bud for next year).
Click Play to Learn How to Prune Lilacs
Despite being a relatively cold-hardy plant, the common lilac (Syringa vulgaris) can suffer harm if a hard frost or freeze occurs just as the flower buds are about to open. As a result, that year’s flowers are lost. You can’t really stop it, so simply accept the loss and look forward to the blossoming twice as much the next year.
Where you put your lilac shrub matters a lot, just like it does with most other plants. Lilacs require full sunlight and prefer well-drained soil. If you made a mistake when you first put your plants on either of these fronts, you can be paying for it today by your lilac not blooming. However, there is a simple solution to the issue: move your shrub to a more favorable location.
Regarding the fourth reason, be aware that although though these bushes have a long lifespan, they do tend to produce fewer flowers as time passes. Implementing a rejuvenation pruning on your lilacs will solve this issue (do not expect immediate results, though). Sometimes, though, the converse is true: your plant may be too young to bloom. Allow some time.
Why aren’t my lilac bushes in bloom?
A. There are a number of potential causes for your lilac’s failure to blossom. Lack of sufficient sunlight is the main culprit. Lilacs (Syringa) should be planted in an area with at least six hours of direct, bright sunlight per day. They can withstand a wide range of moisture levels as long as they are grown in soil with good drainage.
If your lilac is clipped at the wrong time of year, it might not blossom for another reason. Lilacs bloom in the spring on the growth from the previous year, and soon after, they begin to form the buds for the following year. Within a few weeks of the plant blooming, pruning must be done simultaneously with the removal of the wasted flowers in order to prevent the removal of the buds for the following year. A late freeze can harm flower buds on types that bloom early.
Lilacs have a tendency to mature into overgrown, leggy shrubs with minimal foliage at the bottom. When this occurs, it might be required to prune them to within 12 inches of the ground in order to completely rejuvenate them. When the shrubs are dormant in late winter, this should be done. Lilacs benefit from this repair, although their blooming cycle will be hampered for at least one season. Lilacs can receive a rejuvenation pruning over a two-year period to stop the interruption of bloom cycles. Half of the shrub’s stems should be hard pruned the first year, and the remaining stems the following year.
Lilacs do not consume a lot of food. Excessive fertilization, particularly nitrogen fertilizer, can frequently promote luxuriant vegetative growth at the expense of flower development. A lilac’s failure to bloom could potentially be due to its proximity to turf that receives frequent fertilization.
Can you grow a tree out of a lilac bush?
You require a little tree to serve as the garden’s centerpiece. Instead, pick a shrub and utilize basic pruning methods to turn it from a bush into a lovely tree. You can produce a unique plant that adds a touch of class to your yard when you prune a shrub into a little tree. For this method to work, you don’t even need to be an expert in plants or good with pruners.
The greatest shrubs to grow into trees are those that don’t normally produce a lot of suckers from the roots (suckers). Numerous varieties of shrubs, from floral beauties to shrubs with fall color, are included in this group. Lilac, flowering quince, panicle hydrangea (Hydrangea paniculata), and spring-blooming star magnolia are some examples of flowering shrubs that can grow into trees (Magnolia stellata).
Many berried bushes grow into lovely little trees that provide the garden winter appeal. Pyracantha, Siebold viburnum (Viburnum sieboldii), and sea buckthorn are members of this group (Hippophae rhamnoides). Another excellent shrub to grow into a small tree is cotoneaster. Choose upright cotoneaster cultivars like Cotoneaster divaricatus or Peking cotoneaster (Cotoneaster ludicus) for the best results.
Sucker-producing shrubs are the most challenging to grow into trees. These suckers typically grow in small thickets when left to their own devices. Elderberry, chokecherry, and red twig dogwood are shrubs that can produce thickets. These shrubs can be trained to grow into tiny trees; however, it could require a bit more work.
Pruning suckering shrubs into multi-stemmed trees, where you choose a number of upright stems to act as trunks, is an option. For a beautiful multi-stemmed little tree, try the bottlebrush poinciana or pineapple guava in warmer climates. Consider witch hazel, serviceberry, or imitation orange in regions with chilly winters.
Smaller plants are simpler to teach when selecting shrubs to grow into trees. Gardening isn’t just about growing bushes into trees right away. It takes years to complete the process. Start with a plant that is around a year old if you wish to train your shrub into a tiny tree with a single trunk. One to two gallons may be used for a container. When grown as a multi-trunked tree, more mature shrubs produce better results.
Prior to planting, decide which stem will serve as the tree’s trunk. Remove branches from the shrub’s bottom third after planting. Place a sturdy stake next to the main stem, such as a tree stake or a chunk of rebar. On a tree with multiple stems, place a stake for each one. Fix the stem to the base with a tie. Rub out or trim any little sprouts that develop along the trunk as the shrub grows.
Remove lower branches each spring so that the trunk makes up one-third of the tree’s height. Till the tree reaches the desired height, repeat this technique every spring. Then, reduce the canopy to three to five major branches, then prune those branches back by three to five inches to promote branching. Thin the canopy as necessary and cut off any branches that sprout along the trunk to maintain your shrub-tree.
Can you cut lilac blooms?
Your lilac bush will produce more blossoms the following year if you remove the dead flowers. When cutting off your flowers, it’s crucial to only remove the wasted blooms—don’t worry about any nearby stalks. Simply concentrate on the spent bloom’s stem if you can see the two fresh shoots that will grow into blooms the following year. Avoid cutting off the blossoms for the following year!
I now wish to stimulate a second flowering on my dwarf Bloomerang, which ought to happen in late summer or early fall. In order to produce more new growth and blooms during the second bloom season, the spent spring blossoms should be pruned off. A small amount of fertilizer made specifically for woody plants, which I could also use, will help encourage the shrub to bloom once more.
How are lilacs kept from blooming?
- Keep the grass from growing around lilacs to enhance blossoming. The grass will be kept down by placing a 16- to 24-inch circle of landscape fabric around the bushes and covering it with bark or stone.
- Cut lilac branches should be forced into a winter bouquet. The cut ends should be bruised and placed in water. The branches need frequent spraying. When they bloom, keep them in a cool location; after that, move them to a warmer location to show.
- When Abraham Lincoln passed away, poet Walt Whitman had lilacs in mind:
I cried and will continue to cry as spring keeps coming back as the lilacs in the dooryard bloomed for the last time.
- Lilacs are said to represent youthful enthusiasm. Discover more about floral symbolism here.
What can I do with lilacs that are overgrown?
The common purple lilac is a hardy, dependable shrub that can grow up to 20 feet tall. Unfortunately, the lower, shady sections of lilac shrubs typically lose their leaves as they get older. Large, overgrown specimens as a result are frequently leggy and ugly. Pruning can restore or rejuvenate old, neglected lilacs. Home gardeners have two alternative pruning techniques to pick from.
Cutting the entire plant back to within 6 to 8 inches of the ground in late winter is one method of renewing a huge, overgrown lilac (March or early April). A significant number of shoots will sprout during the growth season as a result of this aggressive pruning. Select a few sturdy, robust shoots to construct the shrub’s framework, keeping a few of them, and cut off all the others at ground level in the late winter of the next year. To promote branching, head (clip) back the retained shoots to just above a bud.
Cutting back the overgrown shrubs over a three-year period is a second method for pruning mature lilacs. In late January, start the process by digging up and removing one-third of the big, old stems. The following year, trim out half of the remaining old stems (again in late winter). Additionally, trim out some of the recent growth. Keep a few healthy stems that are evenly spaced apart and cut off the rest. In the third year’s late winter, completely remove all of the old wood. It is also necessary to thin the fresh shoots more. This pruning technique should enable you to take pleasure in blossoms every spring because lilac wood must be three years or older before it blooms.
Within a few years, with the right pruning, an old, overgrown lilac can be converted into a robust, appealing shrub. Pruning should be a frequent component of the lilacs’ management regimen after they have been revived. By cutting a few of the oldest branches every three to five years, the shrub can be kept strong and healthy.
(This article, which first published in the Sunday edition of the Lincoln Journal Star Newspaper in February 2005, has since been amended. Consult the Terms of Use for details on how to copy this content and use any images or visuals.)