- Hydrangeas in a ball (H. paniculata and cvs., Zones 48)
- Smooth hydrangeas (H. arborescens and cvs., Zones 49)
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
How do I deal with an overgrown hydrangea?
Myers believes excessive trimming can be harmful, even though deadheading your hydrangeas can be beneficial for fresh growth. The energy held in the roots of “Annabelle” cultivars will all be used to produce above-ground growth, which is frequently insufficient to support the blooms, according to the author. The older stems can help sustain the new growth while a late winter 15 to 18 inch cutback will promote new development from the roots up.
Can a hydrangea be severely pruned?
This green-stemmed hydrangea should be clipped as soon as the late summer flowers fade for the best blooms. The shrub will then have a chance to generate new growth where the flower buds for the following year will develop.
Test Garden Tip: Use clean, sharp pruners to cut slightly above a set of leaves when pruning back stems.
Some more recent bigleaf hydrangea types, such the well-known “Endless Summer,” have been bred to bloom on both fresh and old wood. This makes them a better option for colder locations because new growth will continue bloom even if the old stems sustain winter damage. Due to the fact that you can prune it at any time of the year and it should still bloom, this also allows you more freedom in pruning. However, pruning soon after bloom will enhance subsequent flowering.
How to Prune Panicle Hydrangeas
Both smooth hydrangeas (Hydrangea arborescens, best known for the variety “Annabelle”) and panicle hydrangeas (Hydrangea paniculata), which include well-known varieties like “Limelight,” bloom on new wood, or that same year’s growth. New wood flowering shrubs typically begin blooming later than old wood bloomers. As long as you avoid pruning when the flower buds are opening, when to prune these woody-stemmed hydrangeas is not as important as when to prune bigleaf kinds.
Test Garden Tip: Generally speaking, when pruning hydrangeas, it’s recommended to just take out about one-third of the plant at a time while it’s still actively developing.
You prune panicle hydrangeas according to your goal. You can sheer off the ends of each branch if you’re only trimming plants that are excessively tall. Cut all the branches back to about a foot above the ground in late winter or early spring when the plant is still dormant if you need to severely prune a spindly shrub. You will still see blossoms later that same year because the plant will continue to produce a lot of fresh new growth as a result.
When should hydrangeas be pruned?
The type of hydrangea you have will determine when to prune it. It is necessary to prune hydrangeas that bloom on new growth in late winter or early spring. Hydrangeas that flower on old, woody growth must be clipped after flowering in the summer.
The specialists at the seed and plant firm Thompson & Morgan state that most hydrangeas are clipped in early spring, ideally in February or March, with the exception of climbing hydrangeas, which are pruned in summer (opens in new tab).
The clearest indicator that your hydrangea is ready for trimming is when all of the seed heads have dried up and new, vibrant green buds have begun to emerge. When you notice those, you’ll know it’s time to prune, according to Lee Burkhill of Garden Ninja (opens in new tab).
Although many hydrangea varieties are pruned at the same time of year—late winter or early spring—the methods for each variety vary.
How should a woody hydrangea be pruned?
In the late winter, early spring, or just above a big bud known as a heading cut, trim back stems. The flower heads of these plants have a conical form. I wait to prune these until late winter or spring because I advise leaving the dried, tan flower heads on the plant to add some winter beauty to your garden. Favorite panicle hydrangeas include:
- H. paniculata ‘Bulk’ PP16, 812, Quick Fire
- (H. paniculata ‘Limelight’)
- Berry White (H. paniculata ‘Renba’ PP28, 509) first editions
Can hydrangeas be cut all the way down in the fall?
These hydrangeas are simple to manage because they bloom each year no matter how they are taken care of or treated. They can be cut down to the ground in the fall and will reappear the next spring with an abundance of blossoms. However, over time, this severe trimming might make the plant gradually weaker.
What occurs if hydrangeas are not pruned?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
How far back may a hydrangea tree be cut?
I have a hydrangea tree, but because the branches are excessively long, they bend downward to the ground when it rains. Can I prune branches back, and if so, when should I do it?
Yes, you can prune it, but first it’s important to define a hydrangea tree so you can understand how and why.
A panicled or PG hydrangea (Hydrangea paniculata) is actually a hydrangea tree that has been deliberately pruned to resemble a tree. Depending on the cultivar, it develops huge, elongated clusters of white or lime-green blooms at the tips of its branches in the summer that progressively turn pink or even scarlet in the fall. Since few other kinds of hydrangea have stems robust enough to create decent trees, it’s very much the only one used in this method.
The panicled hydrangea typically develops into a sizable multi-stemmed shrub. It grows an abundance of branches from its base and develops an erect, spreading shape over time, eventually reaching a height and diameter of up to 15 feet (5 meters) after 15 to 20 years. It’s obvious that it’s a shrub because it doesn’t resemble a tree in its natural state.
The nurseryman selects a young specimen with a strong central branch and starts to shape it into a hydrangea tree “prune it until it yields. He cuts off any more branches and any secondary branches that develop on the branch that will eventually serve as the trunk. During the first few years, staking is frequently required to maintain the trunk’s strict verticality. He starts trimming the top of the plant as well after the trunk has grown to the appropriate height, which is often 4 to 5 feet/1.2 to 1.5 meters. Because of this, the hydrangea is compelled to grow numerous branches at the top of a primary stem, or new trunk.
The process of making a hydrangea tree is time-consuming and significantly raises the price of the plant.
If you like, you can prune a hydrangea by yourself to resemble a tree, but it will take some time.
If you want to keep a hydrangea tree healthy, you’ll need to be prepared to prune it on a regular basis. If you don’t, the branches will grow too long and begin to bend under their own weight, as you’ve seen, and they may even break off, especially when there is heavy snow on top of them.
In your situation, it would be advisable to prune your hydrangea tree before winter because it is overgrown and the limbs are already bending from the weight of the plant. Simply prune all branches back to a distance of 6 to 8 inches (15 to 20 cm) from the top of the trunk in October or November if you don’t want them to risk breaking off in snowy or icy conditions.
Starting pruning early in the spring as opposed to the fall will help your hydrangea tree survive the winter. This is because you’ll want to keep the panicled hydrangea’s dried flower heads until spring because they are lovely over the winter.
Make it a practice to trim back all the branches early in the spring, before the leaves emerge, by 6 to 8 inches (15 to 20 cm). This will give your tree the intended effect, which is typically a ball of greenery topped with blossoms at the summit of a short trunk. Panicle hydrangeas bloom from new growth that begins to appear in mid-spring, so they will continue to bloom profusely even after harsh early-spring trimming.
In order to keep its tree-like look, with a clearly “Remove any suckers that develop at the plant’s base and any growth that develops on the trunk itself. This type of pruning is suitable for all seasons.
The optimal growing conditions for panicled hydrangeas are full sun or very little shade in virtually any well-drained soil. They can thrive in zones 3 to 8 and are cold hardy.
How should hydrangeas be pruned for the winter?
‘PeeGee’ (Hydrangea paniculata) and ‘Annabelle’ (Hydrangea arborescence), two varieties that bloom on new wood, perform best when pruned in the fall or winter. The Old Farmer’s Almanac advises against severe cutting back on “PeeGee” varieties. Instead, remove any dead, damaged, or crossed branches back to the base of the affected branch. Trim back overgrown branches by up to one-third of their height to retain the shape of the shrub.
In the winter, once the shrub turns dormant, you can trim back an overgrown ‘Annabelle’ hydrangea to just above soil level. To prevent the plant from weakening, this rigorous trimming should only be performed once every three years at most. Only remove weak or crossed stems, pruning them off at ground level or where they join a stronger branch, if necessary.