Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
How much should I prune my hydrangeas back?
Remove up to one-third of the older living stems from the hydrangea each summer, cutting them all the way to the ground. The plant will recover as a result. Before the end of July, if required, prune back the plant to regulate its growth and give the buds time to grow. Usually, the plant grows back to its previous size right away.
Should hydrangeas be pruned back during the winter?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Should hydrangeas of all types be pruned?
When should I prune my hydrangeas? is one of the most often asked gardening topics. We all have a tendency to want to hurry outside with the clippers and start hacking away when those billowy large flowers change from cheerful blues, purples, pinks, reds, and whites to uninteresting browns.
When to Cut Back Hydrangeas
The timing will vary according on the variety of hydrangea you have. First of all, be aware that hydrangeas do not require pruning unless the shrub has become unruly or too big for its location and requires some shaping up. Otherwise, simply deadhead wasted blooms and remove any dead branches from the plant.
How to Prune Hydrangeas02:07
But if you do decide to prune one, bear in mind to time it so that it blooms on old wood or new wood depending on the species of hydrangea you have.
If you wait too long, you can chop off the buds that are developing on old wood (stems from the year before the current summer), which would prevent flowers from blooming the following spring. Therefore, as soon as the flowers on these bushes have faded, they should be clipped.
The shrub should be clipped in the early spring before that new growth appears, but, if the shrub flowers on fresh wood (stems generated during the current season), which means that its buds are set inside the season.
Can you ever prune back hydrangeas too much?
Any landscape is more beautiful with hydrangeas. Both their huge, spectacular blooms and their beautiful foliage are attractive. Additionally resilient, resistant to disease and insects, and versatile, hydrangeas are. They thrive in a variety of soil types and can withstand moisture better than the majority of other woody plants. One disadvantage is that various cultivars require various pruning techniques, and many gardeners are unsure about when and how to trim them.
The earliest hydrangeas that flower before July are those that bloom on old wood from the previous year’s growth. Those that flower later in the season—after July—do so because blossom buds on newly developing wood from the current year are blooming.
A safe rule for all varieties of hydrangeas is that no pruning is preferable to improper trimming if you are unsure of the variety you have.
A straightforward strategy that works for all varieties of hydrangeas is to restrict pruning to:
- Winter-dead wood In the spring, trim off all dead branches just as the buds start to open. By using a knife to scrape the bark, you may check the stem for life. If the underside is not green, the plant is dead and needs to be removed.
- Rejuvenation
- Even the healthiest hydrangeas lose old wood. Remove old or dead stems by cutting them off at the plant’s base in the early spring. This will encourage new growth and result in a later in the summer more robust bloom set.
- wilted flowers The safest pruning technique is known as “dead-heading,” because it cannot be done incorrectly.
Bigleaf hydrangea (Hydrangeamacrophylla)
In Maryland, this variety of hydrangea is the most popular. It boasts big blue, pink, red, or purple flowers as well as lovely, shiny foliage. These hydrangeas come in two varieties: mophead and lacecap. Each is pruned in the same manner. The repeat bloomers, which bloom on both the old wood from the previous year and the wood from the current season, are also included in this category of hydrangeas. ‘Endless Summer’ is a well-known cultivar of the repeat bloomers, although there are also numerous more recent repeat flowering cultivars that are readily accessible.
Bigleaf hydrangeas may need to be pruned because they have grown too large. However, excessive pruning will significantly decrease or even stop flowering. After the blooming season, in the late summer, dried flowers can be removed. However, it’s better to hold off until early spring when new growth starts to appear to make sure you are just removing weak or dead sections and not live stems that have flower buds. Hard renewal pruning may be required for hydrangeas that are very old and in decline. All branches should be pruned back to the ground. The blossoms for that year will be lost as a result, but the following year should be very fruitful.
In the genus macrophylla, some well-known cultivars of distinction include “All Summer Beauty,” “Altona,” “Dooley,” “Europa,” and “Nikko Blue.” However, every season sees the introduction of new cultivars into the landscape industry.
The pH of the soil affects the macrophylla species’ flower color. Low pH results in blue blooms, while high pH results in pink or red flowers.
Smooth hydrangea (Hydrangea arborescens)
It is a common component of domestic landscapes and is a native of North American forests. This species is the simplest to prune because it produces white flowers on fresh wood from the current season. Simply give it a severe springtime trim. Cutting all stems back to around 12 inches from the soil line really promotes flowering. The cultivars “Annabelle” and “Grandiflora” are well-known examples.
Pee Gee hydrangea (Hydrangea paniculata)
This is one of the biggest hydrangeas and it comes from the East. It has a 25-foot height limit. Its fragile stems are susceptible to breaking under a weight of white flowers in windy conditions or under heavy snowfall. To maintain the plant’s vitality, cut off damaged stems as they appear. It also blooms on the wood of the current season, just as the smooth hydrangea. In fact, spring pruning will promote flowering and aid in controlling the plant’s size. Simply remove any damaged stems and spent blooms if the size is unimportant. The cultivars “Barbara,” “Bridal Veil,” “Brussels Lace,” “Chantilly Lace,” “Grandiflora,” and “Limelight” are among the best.
Oakleaf hydrangea (Hydrangea quercifolia)
Beautiful native to the Southeast of the United States, the oakleaf hydrangea is a favorite of many gardeners. Even without the huge, towering, 12-inch flowers, the foliage is magnificent. On old wood from the previous year’s growth, it produces its blossoms. It blossoms in Maryland in June, but the flowers last all summer and gradually transform from white to pink before turning tan in the winter. After flowering, if necessary, prune to preserve the desired size and shape. Deadwood from the winter can be cut down at any time.
Climbing hydrangea (Hydrangea anomala subsp. petiolaris)
This variety of trailing vine grows quickly, is appealing, and requires little upkeep. The only pruning required is to cut off stray stems that are not wanted to regulate their growth. As the vine quickly produces new stems, you might need to repeat this process multiple times throughout the season. It blooms in April and May on old wood from the previous year in central Maryland. After blooming, prune them to prevent diminishing bloom.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Do you remove hydrangea blooms that have died?
Your hydrangea shrubs’ blossoms appear to be withering or turning brown. No need to worry—this is merely a signal that it’s time to deadhead—remove the blossoms from the plant.
Deadheading hydrangeas doesn’t cause any damage to the plants at all. Flowering shrubs stop producing seeds when the spent blooms are removed, and instead focus their efforts on developing their roots and leaves. You will be doing your hydrangeas a favor by deadheading because this strengthens and makes plants healthier.
In the spring, how far back should hydrangeas be pruned?
You can prune hydrangeas paniculata and aborescens more severely without losing this year’s blossoms because they bloom on new wood. Although pruning is not necessary, if it is not done the plant will grow taller, with the majority of its flowers at the top.
Cut back to a healthy framework
Trim the previous year’s growth back to a strong framework that is between 30 cm and 60 cm high in the early spring. On each stem, prune to just above a pair of sound buds. For large flowers, prune back to the lowest healthy buds; less firmly for a more natural appearance or a higher plant.
Watch Monty Don describe the many hydrangea trimming techniques in spring:
When and how should hydrangeas be pruned?
Before performing any significant “hard” trimming, let these plants grow for one or two seasons. Depending on whether you want a smaller or larger shrub, prune these hydrangeas in the spring to the ground or not at all once the shrub is established and has had a few growing seasons. On the growth from this season or fresh wood, flower buds will develop.
Favorite smooth hydrangeas include:
- (H. arborescens ‘NCHA7’ PP30,358) Invincibelle Mini Mauvette
- (H. arborescens ‘Abetwo’ PP20571) Incrediball
- The Annabelle tree (H. arborescens)