Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Should hydrangeas be pruned back during the winter?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Which month do you prune back hydrangeas?
The type of hydrangea you have will determine when to prune it. It is necessary to prune hydrangeas that bloom on new growth in late winter or early spring. Hydrangeas that flower on old, woody growth must be clipped after flowering in the summer.
The specialists at the seed and plant firm Thompson & Morgan state that most hydrangeas are clipped in early spring, ideally in February or March, with the exception of climbing hydrangeas, which are pruned in summer (opens in new tab).
The clearest indicator that your hydrangea is ready for trimming is when all of the seed heads have dried up and new, vibrant green buds have begun to emerge. When you notice those, you’ll know it’s time to prune, according to Lee Burkhill of Garden Ninja (opens in new tab).
Although many hydrangea varieties are pruned at the same time of year—late winter or early spring—the methods for each variety vary.
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Can hydrangeas be pruned too much?
Any landscape is more beautiful with hydrangeas. Both their huge, spectacular blooms and their beautiful foliage are attractive. Additionally resilient, resistant to disease and insects, and versatile, hydrangeas are. They thrive in a variety of soil types and can withstand moisture better than the majority of other woody plants. One disadvantage is that various cultivars require various pruning techniques, and many gardeners are unsure about when and how to trim them.
The earliest hydrangeas that flower before July are those that bloom on old wood from the previous year’s growth. Those that flower later in the season—after July—do so because blossom buds on newly developing wood from the current year are blooming.
A safe rule for all varieties of hydrangeas is that no pruning is preferable to improper trimming if you are unsure of the variety you have.
A straightforward strategy that works for all varieties of hydrangeas is to restrict pruning to:
- Winter-dead wood In the spring, trim off all dead branches just as the buds start to open. By using a knife to scrape the bark, you may check the stem for life. If the underside is not green, the plant is dead and needs to be removed.
- Rejuvenation
- Even the healthiest hydrangeas lose old wood. Remove old or dead stems by cutting them off at the plant’s base in the early spring. This will encourage new growth and result in a later in the summer more robust bloom set.
- wilted flowers The safest pruning technique is known as “dead-heading,” because it cannot be done incorrectly.
Bigleaf hydrangea (Hydrangeamacrophylla)
In Maryland, this variety of hydrangea is the most popular. It boasts big blue, pink, red, or purple flowers as well as lovely, shiny foliage. These hydrangeas come in two varieties: mophead and lacecap. Each is pruned in the same manner. The repeat bloomers, which bloom on both the old wood from the previous year and the wood from the current season, are also included in this category of hydrangeas. ‘Endless Summer’ is a well-known cultivar of the repeat bloomers, although there are also numerous more recent repeat flowering cultivars that are readily accessible.
Bigleaf hydrangeas may need to be pruned because they have grown too large. However, excessive pruning will significantly decrease or even stop flowering. After the blooming season, in the late summer, dried flowers can be removed. However, it’s better to hold off until early spring when new growth starts to appear to make sure you are just removing weak or dead sections and not live stems that have flower buds. Hard renewal pruning may be required for hydrangeas that are very old and in decline. All branches should be pruned back to the ground. The blossoms for that year will be lost as a result, but the following year should be very fruitful.
In the genus macrophylla, some well-known cultivars of distinction include “All Summer Beauty,” “Altona,” “Dooley,” “Europa,” and “Nikko Blue.” However, every season sees the introduction of new cultivars into the landscape industry.
The pH of the soil affects the macrophylla species’ flower color. Low pH results in blue blooms, while high pH results in pink or red flowers.
Smooth hydrangea (Hydrangea arborescens)
It is a common component of domestic landscapes and is a native of North American forests. This species is the simplest to prune because it produces white flowers on fresh wood from the current season. Simply give it a severe springtime trim. Cutting all stems back to around 12 inches from the soil line really promotes flowering. The cultivars “Annabelle” and “Grandiflora” are well-known examples.
Pee Gee hydrangea (Hydrangea paniculata)
This is one of the biggest hydrangeas and it comes from the East. It has a 25-foot height limit. Its fragile stems are susceptible to breaking under a weight of white flowers in windy conditions or under heavy snowfall. To maintain the plant’s vitality, cut off damaged stems as they appear. It also blooms on the wood of the current season, just as the smooth hydrangea. In fact, spring pruning will promote flowering and aid in controlling the plant’s size. Simply remove any damaged stems and spent blooms if the size is unimportant. The cultivars “Barbara,” “Bridal Veil,” “Brussels Lace,” “Chantilly Lace,” “Grandiflora,” and “Limelight” are among the best.
Oakleaf hydrangea (Hydrangea quercifolia)
Beautiful native to the Southeast of the United States, the oakleaf hydrangea is a favorite of many gardeners. Even without the huge, towering, 12-inch flowers, the foliage is magnificent. On old wood from the previous year’s growth, it produces its blossoms. It blossoms in Maryland in June, but the flowers last all summer and gradually transform from white to pink before turning tan in the winter. After flowering, if necessary, prune to preserve the desired size and shape. Deadwood from the winter can be cut down at any time.
Climbing hydrangea (Hydrangea anomala subsp. petiolaris)
This variety of trailing vine grows quickly, is appealing, and requires little upkeep. The only pruning required is to cut off stray stems that are not wanted to regulate their growth. As the vine quickly produces new stems, you might need to repeat this process multiple times throughout the season. It blooms in April and May on old wood from the previous year in central Maryland. After blooming, prune them to prevent diminishing bloom.
Can I prune my hydrangeas all the way down?
These hydrangeas are simple to manage because they bloom each year no matter how they are taken care of or treated. They can be cut down to the ground in the fall and will reappear the next spring with an abundance of blossoms. However, over time, this severe trimming might make the plant gradually weaker.
When and how should hydrangeas be pruned?
Before performing any significant “hard” trimming, let these plants grow for one or two seasons. Depending on whether you want a smaller or larger shrub, prune these hydrangeas in the spring to the ground or not at all once the shrub is established and has had a few growing seasons. On the growth from this season or fresh wood, flower buds will develop.
Favorite smooth hydrangeas include:
- (H. arborescens ‘NCHA7’ PP30,358) Invincibelle Mini Mauvette
- (H. arborescens ‘Abetwo’ PP20571) Incrediball
- The Annabelle tree (H. arborescens)
Do you prune hydrangeas in the autumn?
Maintaining your hydrangea can greatly impact its blooms the next year. When given enough time and the right care, hydrangeas are resilient and can recover from virtually anything.
See our comprehensive growth guide for hydrangeas here after reading the fall maintenance advice below!
Because some hydrangea kinds do not like to be clipped in the fall, it is crucial to first identify your variety.
If you have hydrangeas in your garden, you should be aware that there are two different varieties. Both types develop blossom buds, one on new wood and the other on old wood. If a stem has remained on the plant since the previous summer, it is referred to as old wood. Stems that form this season are considered new wood. The majority of hydrangea species that are found in gardens are old wood bloomers, including as Mophead, Big Leaf, Lacecap, and Oakleaf types. Check your variety once more at the neighborhood garden center.
Hydrangeas can grow for many years without being pruned, but it’s time to cut them if they become unkempt, take over a portion of the garden, or stop producing new growth. But when should they be pruned?
After the summer blooms on old wood bloomers or fall blooming hydrangeas, prune them. Old, woody hydrangeas that are pruned in the fall will not bloom the following season.
Hydrangeas that bloom in the summer or those that do so on fresh wood are clipped in the fall, after their flowering season has ended.
Early in the season, hydrangeas are brilliant and colorful, but they are difficult to preserve after being cut. Once they begin to dry on the bush, they are simpler to maintain.
Your plant will have weak, wispy growth near the bottom. Reduce them. They will consume energy that could be used by your plant to produce blossoms.
On your stems, look for any dead stumps. They won’t have sprung any buds or new wood from the original old wood. To totally remove the dead stumps, cut them to the ground at the base. This will give the new growth below a chance to flourish.
To make way for new buds to emerge, old and dead blossoms must be eliminated. To promote flowers for the following summer, remove the flower head immediately above the first few leaves.
Observe the plant’s shape from a distance. The shrub should be pruned into the shape you desire; a spherical is the traditional shape, but you can prune it however you like!
Clean up any leftover debris from the plant’s foundation. Make sure your soil is devoid of all weeds, dead flowers, and leaves.
Feed your blue hydrangeas with Holly-tone to maintain acidic soil and vibrant flowers. Alternatively, choose Flower-tone.
Feed your hydrangeas two to three times each week from spring till fall for the greatest results.
Your hydrangeas will remain healthy and vibrant for many years if you follow these simple instructions.