Although hydrangeas are often mistaken for perpetual flowers, they are actually woody-stemmed shrubs that have a different root system than non-woody, soft-stemmed plants. Because of this, trying to root hydrangeas in water, as you might with certain houseplants, rarely works. For best results, plant hydrangea cuttings at the right time in potting soil.
Like growing roses, there are different ways to grow hydrangeas. When the year’s new stems have grown solid and robust, in late fall or early winter, “hardwood” cuttings obtained from hydrangeas can be rooted. However, it takes a long time for hardwood cuttings to root. 1 The majority of hydrangea producers in the industry employ “softwood” cuttings because they root more quickly and produce superior results.
Can hydrangea cuttings be rooted in water?
Rooting hydrangeas is not too difficult. While some people have succeeded in rooting them in water, many others (like myself) have never been able to do so.
The image to the right, which Susan Park Cole forwarded to us, shows how hydrangeas can be rooted in water. On sometimes, roots appear when an arrangement is left in water for a prolonged period of time. But in my experience, this approach more frequently fails than succeeds.
How do I grow a young hydrangea plant?
Hydrangea (Hydrangea spp. ), which come in both evergreen and deciduous varieties, puts on a stunning floral display in the summer by producing enormous clusters of long-lasting blooms in the colors of white, red, pink, and blue. The majority of hydrangea varieties thrive in USDA plant hardiness zones 6 through 9. Some hardier cultivars, meanwhile, might be able to endure colder weather down to zone 4. Take cuttings from an established plant between spring and mid-summer to begin a new hydrangea.
Using clean pruners or a sharp knife, trim three stems to a length of 1 to 1 1/2 inches. The apex of each stem should have two to three leaves. To promote bushy growth, pinch the growing tip off each stem after pinching the leaves from the stem’s lower portion.
Each stem’s bottom inch should be coated with liquid, gel, or powdered rooting hormone. Fill each hole with a stem, placing the lowest leaves just over the potting soil. To make the stem stand upright, firmly pat the potting material around it.
Put the pot on a heat pad that has been preheated to 59 degrees. Put the pot on top of a refrigerator or other warm appliance if you don’t have a heat pad. Put the pot in a dimly lit area.
If the potting soil appears to be dry, lightly water it. Since the plastic bag will keep the potting soil moist for several weeks, cuttings typically don’t need to be watered. If evaporated water falls down the inside of the bag, pierce a hole in the plastic or open the top.
When the cuttings begin to sprout strong green growth, which shows that the cuttings have rooted, place each cutting into a separate 5-inch pot. Each cutting’s tips should be pinched to produce a bushy, full plant.
Place the pots outside in a protected area where the plants will be shielded from strong winds and sunlight. To maintain a mild moisture in the potting mix, water sparingly as needed.
Before relocating the hydrangea plants to their permanent in-ground placement, let them mature until the following spring. If you’d like, you can move them into bigger pots and give them one or two more years to mature. In either case, plant the seedlings as soon as there is no longer any chance of an early spring frost.
How can a hydrangea branch be rooted?
- Take a 5- to 6-inch-long clipping off a limb of the hydrangea shrub. According to the majority of experts, the cutting will thrive if it is taken from a branch that did not bloom this year.
- The bottom two leaf nodes’ lower leaves should be removed. A leaf emerges from the branch at the leaf node. At that time, the majority of roots will form.
- Reduce the largest leaves’ size by around 50%.
- Insert cuttings into damp vermiculite or sterile medium after dipping them in rooting hormone (this step is absolutely optional).
- Well-watered pot should be allowed to drain. Make sure the ground is damp but not drenched. Plastic wrap the pot and the cuttings. Use stakes to try to prevent plastic from coming in contact with the foliage.
TIP: Position cuttings in a well-lit, shaded area. Never expose fresh cuts to the sun. They’ll be heated in the plastic.
Wait to water again until the soil’s surface feels dry. Cuttings will decay if they receive too much water.
In 2-3 weeks, depending on temperature (faster in warm weather) and humidity, cuttings should start to grow roots. Some cuttings take as little as a week to take root. When a cutting is pulled and the pull is resisted, it is rooted. Reminder: It might not be allowed to reproduce plants that have been trademarked or registered.
I adore this simple approach. If you don’t have a lot of hydrangeas, you are only able to root a small number of new plants at once.
When you gently bend a branch down, the area where it will contact the ground has roughly 5 to 6 inches of leaves removed from it. In this location, remove a small amount of bark from the branch’s underside. Ascertain that at least one leaf node will be below the surface.
Don’t remove the branch from the parent plant. Lower the branch into a small trench that is approximately 2 inches deep and generously top it with soil. Put a block or stone on the area that will be buried to ensure that it stays there. Additionally, this aids in keeping the moisture surrounding the branch. Keep it occasionally watered. When the branch from the mother plant develops roots, break it off and plant it in a pot or the garden.
Hydrangeas like humid, partially sunny weather. On the north and east sides of your house, they work well.
How are hydrangeas rooted in water?
I am kind of thrilled to try out water propagation on the other plants as it has just been quite popular online (I’ll keep sharing the findings from the items we propagate as soon as I figure out what they are all!). However, some of the information I’ve read suggests that water propagation is not recommended for hydrangeas in particular since it results in a weaker root system, which makes them more likely to fail when you transplant them to soil.
Since I haven’t used it personally yet, I’ll also remark that a reader previously commented in a post that she hasn’t encountered any issues. So please let me know if you attempt it this way and are successful!
The other plants can be propagated in water quite easily:
- Grab a little plant cutting.
- Place it in a glass so that the stem is submerged in the liquid but that the leaves and other components are not (otherwise they would rot).
- Use a transparent glass so you may more easily track the root’s development.
- Water should be replaced every several days.
- Set up in a location with enough natural light (we’re using the bedroom windowsills because they have wonderful, filtered light from the window film).
What time of year is ideal for taking cuttings?
The majority of softwood cuttings are obtained from the season’s fragile new growth in the spring and early summer. If they are potted by the middle of the summer, they will have grown enough roots to withstand the winter; otherwise, pot them up the following spring.
Can cuttings be planted directly in the ground?
As long as you have properly prepared the cuttings, you can place them directly into the soil. According to Chick-Seward, “cut under a node at the bottom and above a node at the top.”
Remember that the soil must be able to drain well; as a result, if your garden soil is heavy clay, for instance, you will need to make a suitable potting mix. Fill tiny pots with one part compost to two parts grit with compost, advises Raven.
Cuttings from hydrangeas should be taken when?
There are several widely grown hydrangea species, each with slightly distinct requirements and growth traits:
- Big leaf hydrangeas, or Hydrangeamacrophylla, are hardy in USDA zones 5 to 11. They grow 6 to 10 feet tall and have flowers in shades of blue, pink, and white. This kind seems to be more tolerant of indoor cultivation, therefore some growers think early fall is the best time to take cuttings from it. However, spring cuttings also seem to function well.
- Smooth hydrangeas, or Hydrangea arborescens, are hardy in zones 3 to 9 and grow 3 to 5 feet tall with white flowers. Although stem cuttings can also be used, root cuttings are frequently used to produce this species.
- Oakleaf hydrangea, Hydrangea quercifolia, grows to a height of about 8 feet and has white blossoms. It is hardy in zones 5 to 9. Early in the spring, take cuttings from stems that aren’t blooming, then root them in a pot until a strong root system has formed.
- Tree hydrangea, often known as the panicle hydrangea This cultivar is hardy in zones 3 to 8, growing 8 to 15 feet tall with white to pink blooms. In order to grow fresh garden plants for the fall, these are also best rooted in the spring.
To be sure you comprehend the requirements of the new plants you are developing, it is advisable to do some research on the numerous varieties of hydrangea. Be aware that each species has a variety of cultivars, each with distinct qualities of its own.
When is the ideal time to take hydrangea cuttings?
Late July is the ideal time to take hydrangea cuttings. These cuttings are semi-ripe, which indicates that they come from the growth of the current season, yet they are old enough to have a woody base but are still soft at the tip. When the cuttings are added to compost, the woody foundation keeps them from decomposing.
How to take hydrangea cuttings
Use secateurs to gather material from the hydrangea stems and a knife to trim each cutting when taking hydrangea cuttings. You must place hydrangea cuttings into a pot of grittier compost because water cannot be used to proliferate them due to their woody nature. To keep your cuttings moist until the roots have formed, keep them in a propagator (usually after about six weeks). Winter in a frigid frame or anything comparable. Then, plant the cuttings when they begin to grow in the spring.
How quickly do cuttings of hydrangeas grow?
Knowing more about hydrangeas and hydrangea cuttings will make it simpler for you to feel optimistic about your chances of success. After preparing the cutting, the hydrangeas will begin to grow in two to three weeks.
Cuttings of hydrangeas may occasionally take a week to take root, although this is dependent on conditions like temperature and humidity. Be pleasantly pleased if it goes more quickly than that; otherwise, be prepared for the procedure to take up to three weeks.
Keep in mind that for the greatest results, hydrangea cuttings should be taken in the spring. This offers a cutting the opportunity to experience a whole growing season and eventually develop into a full plant.
It will be simple to achieve consistent results as long as you abide by the preceding recommendations on how to prepare everything and how to take hydrangea cuttings. Soon enough, you’ll be able to appreciate having additional hydrangeas in your yard.
These plants are really beautiful and can enhance the appearance of your yard greatly. Your love of taking care of the plants will grow after you learn how to reproduce hydrangeas.
How do I cut a hydrangea shrub for a flower?
Selecting a stem for cutting is the first stage in the process of rerooting hydrangea cuttings. For hydrangea propagation in the early fall, pick a stem that is at least 6 inches (15 cm) long, has no flowers, and is fresh growth. The stem of a new growth will be greener than an old growth. Be mindful that the entire shrub may be made up of new growth if you live in a colder region where the hydrangea dies back to the ground.
Take a sharp pair of shears and cut the stem off just below a leaf node after choosing a stem to propagate the hydrangea. A set of leaves will develop at a leaf node. The hydrangea cutting should have at least one more set of leaves above the chosen leaf node and be at least 4 inches (10 cm) long. Cut the cutting off the stem.
The cutting should then be stripped of all but the top set of leaves. There should only be two leaves left on the cutting. Crosswise divide the two remaining leaves (not lengthwise).
Use rooting hormone to coat the cutting’s tip, if it is available. Hydrangea shrubs can still be effectively propagated without rooting hormone, however it will boost your chances.
Place the clipping now in wet potting soil. Ensure that the plastic bag does not touch the hydrangea cutting’s leaves as you cover the pot with it.
Place the pot in a shaded area away from the sun. Every few days, check the hydrangea cutting to make sure the soil is staying damp. The cutting will be rooted and your hydrangea propagation will be finished in two to four weeks.
That is all there is to know about hydrangea propagation. You can begin propagating hydrangeas for your yard or for friends and family with a little care and work.
How are hydrangeas grown from seeds?
The perfect hydrangea, according to McEnaney, will be a one- to two-gallon shrub. He says that because of this, “the plant will be a little bit more hardy, have a bigger root system, and the strength to establish itself in your landscape.” Choose a three- or five-gallon plant if you have the strength to dig a large hole so you can make an effect right away. Naturally, growing hydrangeas from seed is a different procedure altogether, according to Chris Link, co-founder of Plant Addicts. Fill a pot with soil and scatter the seeds on top of the soil—do not bury them—if you want to grow hydrangeas from seeds. After that, place your pot near a window with natural light inside, and maintain the soil moist while the seeds sprout. (Link estimates that should take around 14 days.) Follow the instructions below to plant your hydrangea outside after you detect sprouts.