When should I prune my hydrangeas? is one of the most often asked gardening topics. We all have a tendency to want to hurry outside with the clippers and start hacking away when those billowy large flowers change from cheerful blues, purples, pinks, reds, and whites to uninteresting browns.
When to Cut Back Hydrangeas
The timing will vary according on the variety of hydrangea you have. First of all, be aware that hydrangeas do not require pruning unless the shrub has become unruly or too big for its location and requires some shaping up. Otherwise, simply deadhead wasted blooms and remove any dead branches from the plant.
How to Prune Hydrangeas02:07
But if you do decide to prune one, bear in mind to time it so that it blooms on old wood or new wood depending on the species of hydrangea you have.
If you wait too long, you can chop off the buds that are developing on old wood (stems from the year before the current summer), which would prevent flowers from blooming the following spring. Therefore, as soon as the flowers on these bushes have faded, they should be clipped.
The shrub should be clipped in the early spring before that new growth appears, but, if the shrub flowers on fresh wood (stems generated during the current season), which means that its buds are set inside the season.
What happens if hydrangeas aren’t pruned back?
If and when you prune is the key to happy, healthy hydrangea flowers. Of course, fertilizing and offering the ideal environment have a lot to recommend them. However, if you don’t prune properly, your efforts will be in vain. Deadheading is not the same as trimming. Pruning refers to more drastic cutting to preserve shape or remove dead growth. However, feel free to discard spent blossoms or cut fresh ones to use in arrangements.
Hydrangeas can bloom on either fresh wood or old wood, depending on the species. The wood from which they blossom determines whether and when to prune.
Old wood-blooming hydrangeas do not require pruning and benefit from it. They’ll blossom more abundantly the next season if you leave them alone. But feel free to deadhead or gently thin. Just keep in mind that while new growth may appear, it won’t bloom until the following season. In our region, four different species blossom on aged wood. Additionally, they are not limited to the hues displayed here.
Climb using suckers. On your wall or trellis, resist the desire to remove the dormant growth.
The flower heads are more conical in appearance, and the leaves are large and resemble oak leaves. It’s a pleasant surprise for a hydrangea when its leaves turn reddish-orange in the fall.
They are very comparable to lacecap types, but smaller and with more compact leaves.
Pruning should be done in late winter or early spring on hydrangeas that bloom on new wood. Trim back to two feet to prune to shape. The next season’s blossoms are produced by strong, fresh growth that is encouraged by trimming. In our region, there are two types that bloom on fresh wood. They are also not restricted to the colors displayed.
Oakleaf variants are not included in cone-shaped blooms. Keep the blooms on throughout the winter to provide interest; even dried out, they are quite lovely.
regarded as a wild kind. They often have smaller blooms and leaves than Bigleaf variants and are completely white. They enjoy full sun and can grow very tall.
Knowing whether or when to prune now will help you avoid the disappointment of a hydrangea that doesn’t blossom. Don’t forget that a robust shrub will produce more gorgeous blossoms if it has well-draining soil and good organic fertilizer. Come on in, and we’ll show you where to go to develop your green thumb.
Which month do you prune back hydrangeas?
Depending on which group the plant belongs to, the timing and extent of pruning are determined:
Advice on Pruning for Group 1:
- As the days get shorter and the weather gets colder in the late summer and fall, buds for the following year’s blooms start to form.
- Typically, removing dead, diseased, or damaged branches is all that is required to preserve shape, size, and a healthy plant. Otherwise, gentle pruning ought to be practiced.
- In the summer, trimming should begin as soon as flowering ends, but no later than August 1. Pruning should not be done in the fall, winter, or spring because you risk removing fresh buds.
- Tip-pruning the branches in the spring as the leaves begin to appear can promote more numerous, smaller flower heads as opposed to fewer, larger flower heads.
Advice on Pruning for Group 2:
- On the growth of the current year, flower buds form.
- Early in the spring, as the leaves are starting to emerge, prune.
- Just above a node, prune branches back by half to a third.
- After that, prune any fragile or spindly branches.
- Minimal trimming encourages huge, strong bushes with many of tiny flower heads in H. arborescens. Hard pruning between 12 and 18 inches from the ground, or even all the way down, will result in fewer but larger flower heads that may flop if unsupported.
- For H. paniculata, remove the surrounding smaller wood while leaving the larger stems in order to establish a sturdy foundation.
Pruning may be connected to flower head size. Shoots will grow more vigorously and flower heads will be bigger and fewer with more rigorous trimming. Smaller but more numerous flower heads may result from less aggressive or tip pruning.
Consideration of hydrangeas’ mature size is the best piece of advise. Place them in a location where they won’t outgrow and won’t need a lot of pruning to keep them in check. Hydrangeas don’t need to be pruned precisely or often; as long as dead wood is removed, they will remain healthy and continue to develop and bloom.
Do you prune your hydrangeas annually?
In the late winter, early spring, or just above a big bud known as a heading cut, trim back stems. The flower heads of these plants have a conical form. I wait to prune these until late winter or spring because I advise leaving the dried, tan flower heads on the plant to add some winter beauty to your garden. Favorite panicle hydrangeas include:
- H. paniculata ‘Bulk’ PP16, 812, Quick Fire
- (H. paniculata ‘Limelight’)
- Berry White (H. paniculata ‘Renba’ PP28, 509) first editions
Cut back these shrubs in late winter before new growth begins
Shrubs that flower on young wood typically start blooming later than old-growth bloomers, beginning in June and continuing until the first frost, because they need to grow and set buds the same year that they bloom. As long as you avoid trimming when the flower buds are opening, these shrubs are understanding if it is not done at a specific period.
1. Trim the flowers all the way back for larger blooms.
These bushes can be completely removed from the ground in late winter or the beginning of spring. If cut severely like this every year, smooth hydrangeas will produce much larger flowers, but many gardeners prefer smaller blooms on stronger stems.
2. Maintain an old growth foundation to lessen flopping
Especially after watering from above or after a heavy storm, the branches of some hydrangeas frequently topple over from the weight of their blooms. Cutting the stems to a height of 18 to 24 inches will help to reduce this flopping by creating a strong framework for fresh growth.
Janet Carson is the University of Arkansas Cooperative Extension Service’s horticulture specialist.
Receive our most recent advice, training, and tutorial videos in your inbox.
Should I remove the entire hydrangea plant?
The panicle hydrangea has flower clusters in the shape of cones that open up in white, cream, green, or pink hues before maturing into maroon later in the growing season. The size of panicle hydrangeas ranges from dwarf types as the 3 tall ‘Bombshell’ (3′ x 3′) to 15 tall Peegee. Little Quick Fire, Little Lime, and Limelight are a few other well-known varieties.
As long as the environment isn’t too hot, panicle hydrangeas can grow in full sun to partial shade. They thrive in the bright early light, but prefer some shade in the late afternoon. Zones 3 to 9 are suitable for them.
Pruning Panicle Hydrangea
H. paniculata requires no trimming because it blooms on new wood. However, you can cut the plant to within a few feet of the ground in late winter or early spring if you wish to revitalize it. Its size can also be managed through spring pruning. Remove any dead flower heads that are directly below the bloom to keep it appearing clean.
Are hydrangeas intended to have deadheads?
Correctly and timely deadheading your hydrangeas only benefits these plants in the long run. Deadheading is the technique of removing wasted flowers from a plant to promote greater blooming later on, much like trimming. Professional gardener Melinda Myers notes that deadheading encourages the plant’s energy to flow into the leaves, stems, and roots (rather than developing seeds) for future growth.
According to Myers, deadheading your hydrangeas provides cosmetic advantages in addition to enhancing the future blooms. She says that many gardeners prefer the neat and tidy impression that faded blooms create to that of dried flowers left on the plant. The species of your hydrangeas will determine when and how to deadhead them, according to Myers. Here is her response to our question regarding the ideal moment and technique for harvesting finished flowers from several varieties of hydrangeas.
How is a hydrangea pruned?
Mophead hydrangeas and lacecap hydrangeas, commonly known as bigleaf hydrangeas (Hydrangea macrophylla), are pruned using the same technique.
With its broad, roundish heads of huge petals in colours of blue, pink, green, and white, mophead hydrangeas are a popular choice for gardens. They are therefore a popular shrub option for cottage garden ideas and are also effective shade-giving bushes.
Small blooms in the center of the bloom and a border of bigger petals on the outside help identify lacecap hydrangeas.
The experts at Thompson & Morgan suggest that in order to winterize hydrangeas, “it’s better to leave the faded blooms in place over the winter to safeguard vulnerable new buds from frost damage.”
Early in the spring, while pruning lacecaps and mophead hydrangeas:
- To promote new growth that will produce better blooms, remove one or two of the plant’s oldest, weakest stems at the base.
- Just above a pair of buds, carefully remove any old flowerheads using secateurs.
- Don’t remove any of the blossom buds, please.
- Cut the stems down to the plant’s root system if the bigleaf hydrangea shrub has been neglected and has a lot of overlapping, tangled branches. The hydrangea won’t blossom until the next year, though.
What are hydrangeas used for in the winter?
One of the most adored Southern belles in the garden is the hydrangea. There are many reasons to enjoy shrubs; they tolerate shade, come in a range of colors, and can add interest all year long. In addition, hydrangeas typically require little maintenance and thrive in challenging growth environments.
Hydrangeas in Winter
Mulch over the hydrangeas in the winter to protect them. Leave faded blossoms alone to add interest in winter.
You may be wondering how to ensure that your shrubs remain secure over the winter due to the unpredictable nature of the weather. I am aware that I am in Georgia. So I asked Ryan McEnaney of Bailey Nurseries the most important winter care issues for hydrangeas, and fortunately, the answers are straightforward:
Is there a time or temperature when it’s “too late” to winterize hydrangeas?
Any form of protection is beneficial. Winter months bring a wide range of temperatures, so if you’ve already experienced any really chilly spells, some harm may have already been done. Despite this, continue to preserve it to ward off any potential threats in the months to come.
Will mulch prevent plants from heaving? Is there a type of mulch that is better for winterizing plants? When spring returns, do I need to remove the mulch?
Plants in the ground and in containers benefit greatly from mulch during the winter. Beyond providing general security, the mulch’s role is to establish an environment that is more consistent with what is going on outside. Temperatures can change from -10 to 30 degrees in some areas of the nation within a week or two. As a result, the root system is disrupted as water molecules in the ground freeze (contract) and then defrost (expand) (heaving). Mulch aids in minimizing those abrupt alterations to safeguard the plants. We advise using wood mulch, oak leaves, or pine straw.
To prevent damage from late spring, wait until after your last frost date to [remove to the mulch]. However, don’t wait too long as heat can develop moisture, which can cause the stems to rot in the absence of air flow.
In the fall, how far back should hydrangeas be pruned?
Trimming season for hydrangeas that bloom on new wood runs from late fall through early spring. This group includes smooth and peegee forms, which function well whether they are pruned lightly, to the ground, or not at all. In order to maintain a compact stature and luxuriant flowering, Peegee hydrangeas are frequently pruned into trees with one or two main stems that are between 15 and 30 feet tall.
Smooth hydrangeas can be pruned all the way to the ground; however, the more frequently they are cut, the less able their stems are to withstand the weight of their huge blooms. Smooth hydrangeas grow in mounds that are 3 to 6 feet tall and wide. When the plants are pruned to leave between 18 and 24 inches of growth, a woody base forms that helps the stems support the pompom blooms more effectively.
Do you prune hydrangeas in the spring or the fall?
Pruning is not typically thought of as one of the many gardening activities that may be done in the fall, despite the fact that there are several. It can be difficult to cultivate hydrangeas successfully in New Hampshire, and if you want your plants to blossom, there is frequently very little room for error in pruning.
Wait until Spring to prune hydrangeas
In New Hampshire, hydrangeas come in a variety of kinds, and each one has quite distinct growth patterns and pruning needs. Some plants only produce flowers on fresh growth, while others mostly produce flower buds on older wood. In any case, it is better to postpone all hydrangea pruning until spring. Hydrangeas, as with all other trees and shrubs, go dormant in the fall. Not much new growth is produced by them until the next spring. As new growth is more vulnerable to harsh cold at the location of wounds, plants that have been trimmed now run a higher risk of winter damage. Additionally, fall pruning may lessen the quantity of June blooms.
Considerations for pruning hydrangea species commonly grown in New Hampshire gardens
The gigantic blue mopheads or lacecaps known as bigleaf hydrangeas (Hydrangea macrophylla), which are familiar to most gardeners, form their flower heads at the tips of stems on old wood from the previous year. Although lower buds along the stem have the capacity to grow blooms as well, the hydrangea’s blossoming potential is decreased if those buds are died or damaged throughout the winter. Wait until new growth sprouts in the spring before pruning your bigleaf hydrangeas. Approximately 1/4 inch above the first group of live buds, prune the plant. A hint: the interior of living stems will be green, whereas the interior of dead stems will be brown. Cut completely dead stems flush with the base.
The three other hydrangea species that are frequently planted in Fresh Hampshire—oakleaf (H. quercifolia), panicle (H. paniculata), and smooth—all bloom on new growth. Before the emergence of the leaves in the late winter and early spring, remove wasted flowers and prune the plant to improve its general structure and habit.
In conclusion, there are a ton of other activities you can engage in to stay occupied in the garden during fall. Save the spring for hydrangea pruning.